Inhaltszusammenfassung zur Seite Nr. 1
Micro Audio System
with CD-R/RW Player,
AM/FM Tuner
and Remote Control
OWNER'S MANUAL
ES128
Visit our web site at www.emersonradio.com
ES128_042806.p65 30 28/4/2006, 11:39
Inhaltszusammenfassung zur Seite Nr. 2
CAUTION TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! The lightning flash with arrow- WARNING: TO REDUCE THE The exclamation point within head symbol, within an equi- an equilateral triangle is in- RISK OF ELECTRIC SHOCK lateral triangle is inten
Inhaltszusammenfassung zur Seite Nr. 3
Thank you for purchasing this Micro Audio System with programmable CD-R/RW Player from Emerson. This system includes an AM/FM digital tuner with 20 preset station memories, a digital clock, a full-function remote control, and a pair of matching speakers. Please review this manual completely and carefully to make sure that you are getting the maximum benefit from all features we have included in this system. If after reading this manual you experience any problems with the set-up or operation of
Inhaltszusammenfassung zur Seite Nr. 4
IMPORTANT NOTES CLASS 1 LASER PRODUCT CAUTION CLASS 1 LASER PRODUCT INVISIBLE LASER RADIATION APPAREIL Á LASER DE CLASSE 1 WHEN OPEN AND INTERLOCKS DEFEATED. PRODUCTO LASER DE CLASE 1 AVOID EXPOSURE TO BEAM This product contains a low power Laser Device. • Avoid installing this unit in places • Operate controls and switches as exposed to direct sunlight or close to described in the manual. heat radiating appliances such as • Before turning on the power, make electric heaters, on top of other ste
Inhaltszusammenfassung zur Seite Nr. 5
PREPARATION FOR USE Unpacking And Set Up • Remove the main unit, the speakers, and the remote control unit from the display carton. Remove all packing materials from the components. We recommend that you save the original carton and packing material if possible, in the event that your system even needs to be returned for service. Using the original carton and packing materials is the only way to protect your system from shipping damage. • Press on the CD door in the area marked OPEN/CLOSE to
Inhaltszusammenfassung zur Seite Nr. 6
Connecting the Speakers Place the speakers on either side of the main unit. Connect the speaker on the left side of the main unit to the “L” speaker jack on the back panel. Connect the speaker on the right side of the main unit to the “R” speaker jack on the back panel. Make sure that the plugs on the speaker wires are fully inserted into the speaker jacks on the back panel of the main unit. Right Side Speaker Left Side Speaker 5 ES128_042806.p65 5 28/4/2006, 11:39
Inhaltszusammenfassung zur Seite Nr. 7
Remote Control Battery The remote control operates on one 3-volt lithium battery, type CR2025 or equivalent, included. To insure that the battery is fresh the first time you use your system we have placed plastic spacer between the battery and the battery terminal. You must remove this spacer before using the remote for the first time. To remove the spacer, pull on the small tab that is extending outside the battery compartment as shown. Remote Control Operation The main functions of this system
Inhaltszusammenfassung zur Seite Nr. 8
Changing The Lithium Battery When the operation of the remote becomes intermittent or the main unit no longer responds to the remote commands, it is probably time to change the remote battery. Open the battery compartment by squeezing the battery compartment locking tab as shown and slide the battery holder out of the battery compartment. Remove the exhausted battery and install a fresh CR2025 battery in the battery holder with the “ + ” facing up as shown, then slide the battery holder back int
Inhaltszusammenfassung zur Seite Nr. 9
Power Source This system is designed to operate on 120V AC 60Hz house current only. Connecting this system to any other power source may cause damage to the system and such damage is not covered by your warranty. NOTE: The system has polarized AC plug with one wide blade and one narrow blade. The plug will only fit into matching polarized AC outlets. This is a safety feature to reduce the possibility of electric shock. If the plug will not fit in your AC outlet, you probably have an outdated non
Inhaltszusammenfassung zur Seite Nr. 10
LOCATION OF CONTROLS AND INDICATORS Front Panel 8 9 7 6 10 11 5 4 12 3 13 2 1 16 15 14 Back Panel 18 17 19 9 ES128_042806.p65 9 28/4/2006, 11:39
Inhaltszusammenfassung zur Seite Nr. 11
1.) TUNE/SKIP Forward Button. 2.) TUNE/SKIP Reverse Button. 3.) PROGRAM/MEM./CLK.ADJ. Button. 4.) P-MODE/MEM-UP Button. 5.) BAND Button. 6.) FUNCTION Button. 7.) POWER button. 8.) CD Door OPEN/CLOSE Position. 9.) Standby LED Indicator. 10.) REMOTE SENSOR. 11.) Multi-Function LCD Display. 12.) PLAY/PAUSE Button. 13.) VOLUME / Buttons. 14.) PHONES Jack. 15.) AUX IN Jack. 16.) STOP Button. 17.) FM Wire Antenna. 18.) SPEAKER R/L Jacks. 19.) AC Power Cord. 10 ES128_042806.p65 10
Inhaltszusammenfassung zur Seite Nr. 12
Remote Control 6 5 7 8 4 9 3 2 10 1 11 12 1.) PLAY/PAUSE Button. 2.) TUNE/SKIP Button. 3.) (Stop) /BAND Button. 4.) POWER Button. 5.) MEMORY Button. 6.) Infrared Transmitter. 7.) MEMORY /P-MODE Button. 8.) FUNCTION Button. 9.) PROG. Button. 10.) VOL. / Buttons. 11.) TUNE/SKIP Button. 12.) Battery Compartment. 11 ES128_042806.p65 11 28/4/2006, 11:39
Inhaltszusammenfassung zur Seite Nr. 13
OPERATING INSTRUCTIONS • Make sure that you have unwound the AC power cord and the FM wire antenna and extended them to their full length. • Make sure that you have connected the speakers. • Make sure that you have removed the plastic battery spacer tab from the remote control. Setting The Clock When you connect the system to the AC outlet for the first time, the Standby indicator lights, the main display turns ‘ On’ and shows “AM 12:00”. Do not press the POWER button. The system must be
Inhaltszusammenfassung zur Seite Nr. 14
2.) Press the PROGRAM/MEM./CLK. ADJ button again. The Hour digits begin flashing. 3.) Press the or buttons to set the display to the correct hour. Be sure to observe the AM/PM indicators to make sure you are setting the Hour correctly. 4.) Press the PROGRAM/MEM./CLK. ADJ button again. The Minute digits begin flashing. 5.) Press the or buttons to set the display to the correct Minute. 6.) Press the PROGRAM/MEM./CLK. ADJ once more. The display stops flashing and the clock begins to run. The co
Inhaltszusammenfassung zur Seite Nr. 15
Listening To The Radio 1.) Press the POWER button on the main unit or remote control to turn the system ‘ On’ . The Standby indicator goes off. If necessary, press the FUNCTION button to select the Radio mode and the display shows: FM 87.5 MHz. To switch between FM and AM bands press the BAND button on the front panel or remote. 2.) Tune to the desired station as follows: • Automatic Tuning - Depress and hold the or buttons until the display begins to move, then release the buttons. The tun
Inhaltszusammenfassung zur Seite Nr. 16
Antenna Information AM The AM ferrite bar antenna is inside the cabinet. If AM reception is unsatisfactory try turning the entire unit slightly until you find the direction that provides the best reception for the desired station. FM Make sure the FM lead wire antenna is extended to its full length. You may have to vary the direction of the wire antenna to find the position that provides the best reception. 15 ES128_042806.p65 15 3/5/2006, 9:56
Inhaltszusammenfassung zur Seite Nr. 17
Presetting Stations In The Tuner Memory The tuner in this system has a total of 20 preset station memories that allow you to store up to 10 AM and 10 FM stations for easy recall at any time. 1.) Tune to the first station that you wish to store by either the Automatic or Manual Tuning method described on page 14. Example: FM 93.5 MHz. 2.) When the desired station appears on the display, press the PROGRAM/MEM./ CLK. ADJ button once. The MEMORY indicator begins flashing and the “P1.” indicator appe
Inhaltszusammenfassung zur Seite Nr. 18
Auto Preset Function This model includes an Auto-Preset feature which you can use to automatically enter 10 strong FM and AM stations in the tuner preset memory. NOTE: This feature is useful if you live in a rural area with a limited number of stations. However if you live in a major metropolitan area with many strong stations, do not use the Auto-Preset feature. It will memorize the first 10 strong stations it encounters and these will probably not be the same 10 stations that you would select
Inhaltszusammenfassung zur Seite Nr. 19
Playing Compact Discs NOTE: Although the CD player can read CD-R and CD-RW discs, in addition to normal CDs, however the playability of CD-R/RW discs may be affected by the type of software that was used to create the discs, as well as the quality and condition of the blank media you are using. 100% playability cannot be guaranteed. This is not an indication of a problem with the player. Normal Playback 1.) Press the POWER button to turn the system ‘On ’. The Standby indicator goes off. 2.) Pre
Inhaltszusammenfassung zur Seite Nr. 20
8.) To search within a track to locate a specific musical passage depress and hold the or buttons. The player will move forward or backward at high speed as long as the buttons are depressed. When you hear the desired passage release the buttons and normal speed playback will resume at that point. 9.) To pause playback temporarily press the PLAY/PAUSE button again. The sound stops and the play indicator flashes but the disc continues to spin. Press the PLAY/PAUSE button once more to can
