Inhaltszusammenfassung zur Seite Nr. 1
VSX-1017TXV_KU.book 1 ページ ２００７年４月１２日 木曜日 午前１１時３２分
AUDIO/VIDEO MULTI-CHANNEL
RECEIVER
VSX-1017TXV-K
Register your product at
http://www.pioneerelectronics.com (US)
http://www.pioneerelectronics.ca (Canada)
Protect your new investment
The details of your purchase will be on file for reference in the event of an
insurance claim such as loss or theft.
Receive free tips, updates and service bulletins on
your new product
Improve product development
Your input helps us continue to design p
Inhaltszusammenfassung zur Seite Nr. 2
VSX-1017TXV_KU.book 2 ページ ２００７年４月１２日 木曜日 午前１１時３２分 CAUTION – TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD. RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. ATTENTION – POUR PREVENIR LES CHOCS ELECTRIQUES, NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN PROLONGATEUR, UNE PRISE DE COURANT, OU UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT ETRE INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A DECOUVERT. D
Inhaltszusammenfassung zur Seite Nr. 3
VSX-1017TXV_KU.book 3 ページ ２００７年４月１２日 木曜日 午前１１時３２分 IMPORTANT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead, within CAUTION: The exclamation point within an equilateral an equilateral triangle, is intended to alert TO PREVENT THE RISK OF ELECTRIC triangle is intended to alert the user to the the user to the presence of uninsulated SHOCK, DO NOT REMOVE COVER (OR presence of important operating and "dangerous voltage" within the product's BACK). NO USER-SERVICEABL
Inhaltszusammenfassung zur Seite Nr. 4
VSX-1017TXV_KU.book 4 ページ ２００７年４月１２日 木曜日 午前１１時３２分 Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. Contents 01 Before you start 04 Controls and displays Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Front panel. . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 5
VSX-1017TXV_KU.book 5 ページ ２００７年４月１２日 木曜日 午前１１時３２分 Manual speaker setup. . . . . . . . . . . . . . . . . . . . . . . . . . 40 10 Using other functions Speaker Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Making an audio or a video recording . . . . . . . . . . . . 55 Crossover Network . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Reducing the level of an analog signal. . . . . . . . . . . . 55 Channel Level . . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 6
VSX-1017TXV_KU.book 6 ページ ２００７年４月１２日 木曜日 午前１１時３２分 Before you start 01 Chapter 1: Before you start • Sound Retriever The Sound Retriever feature employs new DSP Features technology that helps bring CD quality sound back to • Advanced Direct Energy design WMA, MP3 and MPEG-4 AAC audio files by restoring This receiver offers a new advancement in discrete sound pressure and smoothing jagged artifacts left over design unique to Pioneer for high-power drivability, low
Inhaltszusammenfassung zur Seite Nr. 7
DOWN DOWN VSX-1017TXV_KU.book 7 ページ ２００７年４月１２日 木曜日 午前１１時３２分 Before you start 01 Checking what’s in the box Installing the receiver Please check that you’ve received the following supplied When installing this unit, make sure to put it on a accessories: level and stable surface. Setup microphone (cable: 5 m (16.4 ft.)) Don’t install it on the following places: – on a color TV (the screen may distort) Remote control unit – near a cassette deck (or close to a device that gives
Inhaltszusammenfassung zur Seite Nr. 8
VSX-1017TXV_KU.book 8 ページ ２００７年４月１２日 木曜日 午前１１時３２分 5 minute guide 02 Chapter 2: 5 minute guide Set the subwoofer volume to a comfortable level. Introduction to home theater 4 Use the on-screen automatic MCACC setup to set up Home theater refers to the use of multiple audio tracks to create your system. a surround sound effect, making you feel like you’re in the middle See Automatically setting up for surround sound (Auto of the action or con
Inhaltszusammenfassung zur Seite Nr. 9
VSX-1017TXV_KU.book 9 ページ ２００７年４月１２日 木曜日 午前１１時３２分 5 minute guide 02 1 Switch on the receiver and your TV. If no operations are performed for 10 seconds while the speaker configuration check screen is being displayed, 2 Connect the microphone to the MCACC SETUP MIC the Auto MCACC Setup will resume automatically. In this jack on the front panel. case, you don’t need to select ‘OK’ and press ENTER in Place the microphone
Inhaltszusammenfassung zur Seite Nr. 10
VSX-1017TXV_KU.book 10 ページ ２００７年４月１２日 木曜日 午前１１時３２分 5 minute guide 02 Problems when using the Auto MCACC Setup If the room environment is not optimal for the Auto Better sound using Phase Control MCACC Setup (too much background noise, echo off the This receiver’s Phase Control feature uses phase walls, obstacles blocking the speakers from the correction measures to make sure your sound source microphone) the final settings may be incorrect.
Inhaltszusammenfassung zur Seite Nr. 11
VSX-1017TXV_KU.book 11 ページ ２００７年４月１２日 木曜日 午前１１時３２分 Connecting your equipment 03 Chapter 3: Connecting your equipment This receiver provides you with many connection possibilities, but it doesn’t have to be difficult. This page explains the kinds of components you can connect to make up your home theater system. Rear panel ENNA OPTICAL DI IIG 4 1 OUTLET CENTE CENTER 1 16 1 1 L PB PR Y P PB P PR OUT T T IN 3 R Y PB PR Y P
Inhaltszusammenfassung zur Seite Nr. 12
VSX-1017TXV_KU.book 12 ページ ２００７年４月１２日 木曜日 午前１１時３２分 Connecting your equipment 03 11 Multichannel pre-amplifier outputs Use to connect separate amplifiers for front, center, When making cable connections surround, surround back and subwoofer channels. To avoid hum, do not lay connected cables over the Connecting additional amplifiers on page 50 (see also top of the receiver. Installing your speaker system on page 18 for powered s
Inhaltszusammenfassung zur Seite Nr. 13
VSX-1017TXV_KU.book 13 ページ ２００７年４月１２日 木曜日 午前１１時３２分 Connecting your equipment 03 2 Connect a composite or S-video output on your DVD player to the DVD/LD VIDEO or DVD/LD S-VIDEO Connecting your TV and DVD player input. Connect using a standard video cable or an S-video cable. 1 VIDEO S-VIDEO 3 Connect a coaxial-type digital audio output on IN IN your DVD player to the COAXIAL 1 (DVD/LD) input. Use a coaxial cable designed for digital audio. TV 1 4 Connect the
Inhaltszusammenfassung zur Seite Nr. 14
VSX-1017TXV_KU.book 14 ページ ２００７年４月１２日 木曜日 午前１１時３２分 Connecting your equipment 03 1 Connect the audio/video outputs on the set-top 1 Connect the audio/video outputs of the video box to the TV/SAT AUDIO and VIDEO inputs. player/recorder to the DVR/VCR1 AUDIO and VIDEO Connect using a stereo RCA/phono jack cable and a inputs. video or S-video cable. Use a stereo RCA/phono jack audio cable for the audio connection and a video or S-video cable for the vide
Inhaltszusammenfassung zur Seite Nr. 15
VSX-1017TXV_KU.book 15 ページ ２００７年４月１２日 木曜日 午前１１時３２分 Connecting your equipment 03 The HDMI connection transfers uncompressed digital VSX-1017TXV video, as well as almost every kind of digital audio that the ANTENNA OPTICAL DIGITAL connected component is compatible with, including OUT IN AM LOOP 1 P DVD-Video, DVD-Audio (see below for limitations), Video COMPONENT VIDEO ( ) CENTER DVD/LD IN 1 L L Y PB PR Y PB PR ( DVR/ IN OUT VCR1) CD/Super VCD, CD and MP3. 1 IN 2 IN (TV/SAT) 2
Inhaltszusammenfassung zur Seite Nr. 16
VSX-1017TXV_KU.book 16 ページ ２００７年４月１２日 木曜日 午前１１時３２分 Connecting your equipment 03 3 To hear audio from your HDMI component through this system, make analog and/or digital connections as Connecting digital audio sources necessary. This receiver has both digital inputs and outputs, On the rear panel, you must connect to the audio jacks allowing you to connect digital audio components for from a set of audio/video inputs (for example, DVR/VCR1 playback
Inhaltszusammenfassung zur Seite Nr. 17
VSX-1017TXV_KU.book 17 ページ ２００７年４月１２日 木曜日 午前１１時３２分 Connecting your equipment 03 About the WMA9 Pro decoder TM This unit has an on-board Windows Media Audio 9 Connecting a component to the front 1 Professional (WMA9 Pro) decoder, so it is possible to panel inputs playback WMA9 Pro-encoded audio using a coaxial or The front panel inputs comprise a composite video jack optical digital connection when connected to a WMA9 (VIDEO), an S-video jack (S-VIDEO),
Inhaltszusammenfassung zur Seite Nr. 18
VSX-1017TXV_KU.book 18 ページ ２００７年４月１２日 木曜日 午前１１時３２分 Connecting your equipment 03 Installing your speaker system To take full advantage of the receiver’s surround sound main surround speakers should always be connected as capabilities connect front, center, surround and a pair, but you can connect just one surround back surround back speakers, as well as a subwoofer. speaker if you like (it must be connected to the left Although this is ideal, other configurations with fewer su
Inhaltszusammenfassung zur Seite Nr. 19
VSX-1017TXV_KU.book 19 ページ ２００７年４月１２日 木曜日 午前１１時３２分 Connecting your equipment 03 Bare wire connections When placing speakers near the TV, we recommend using magnetically shielded speakers to prevent Make sure that the speaker cable you’re going to use is 3 possible interference, such as discoloration of the properly prepared with about 10 mm ( /8 in.) of insulator picture when the TV is switched on. If you do not have stripped from each wire, and the exposed w
Inhaltszusammenfassung zur Seite Nr. 20
VSX-1017TXV_KU.book 20 ページ ２００７年４月１２日 木曜日 午前１１時３２分 Connecting your equipment 03 The diagrams below show suggested surround and surround back speaker orientation. The first diagram Connecting antennas (fig. A) shows orientation with one surround back speaker Connect the AM loop antenna and the FM wire antenna (or none) connected. The second (fig. B) shows as shown below. To improve reception and sound quality, orientation with two surround back speakers conne
