Inhaltszusammenfassung zur Seite Nr. 1
Contents
Introduction ...................................2
AV Receiver
Connection ..................................13
TX-SR307
Turning On & First Time Setup .....32
Instruction Manual
Basic Operations.........................38
Using the Listening Modes ........49
Advanced Setup ..........................54
Controlling Other Components ....62
Others...........................................68
Thank you for purchasing an Onkyo AV Receiver.
Please read this manual thoroughly before making
conn
Inhaltszusammenfassung zur Seite Nr. 2
WARNING AVIS WARNING: RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE TO REDUCE THE RISK OF FIRE OR ELECTRIC DO NOT OPEN NE PAS OUVRIR SHOCK, DO NOT EXPOSE THIS APPARATUS TO The lightning flash with arrowhead symbol, within an RAIN OR MOISTURE. equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within CAUTION: the product’s enclosure that may be of sufficient TO REDUCE THE RISK OF ELECTRIC SHOCK, magnitude to constitute a risk of electr
Inhaltszusammenfassung zur Seite Nr. 3
Precautions 1. Recording Copyright—Unless it’s for personal use For U.S. models only, recording copyrighted material is illegal FCC Information for User without the permission of the copyright holder. CAUTION: 2. AC Fuse—The AC fuse inside the unit is not user- The user changes or modifications not expressly serviceable. If you cannot turn on the unit, contact approved by the party responsible for compliance could your Onkyo dealer. void the user’s authority to operate the equipment. 3. Car
Inhaltszusammenfassung zur Seite Nr. 4
Supplied Accessories Precautions—Continued Make sure you have the following accessories: For British models Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. IMPORTANT The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral Remote controller and two batteries (AA/R6) Brown: Live As the colours of the wires in the mains lead of this apparatus may not correspond with the co
Inhaltszusammenfassung zur Seite Nr. 5
Contents Introduction Basic Operations Important Safety Instructions .................................... 2 Basic Operations..................................................... 38 Precautions ............................................................... 3 Basic AV receiver Operation ............................... 38 Supplied Accessories................................................ 4 Setting the Display Brightness............................. 39 Muting the AV receiver .....................
Inhaltszusammenfassung zur Seite Nr. 6
Features Amplifier *1 65 Watts/Channel @ 8 ohms (FTC) 100 Watts/Channel @ 6 ohms (IEC) Manufactured under license from Dolby Laboratories. “Dolby”, 120 Watts/Channel @ 6 ohms (JEITA) “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. Optimum Gain Volume Circuitry H.C.P.S. (High Current Power Supply) Massive High *2 Power Transformer Manufactured under license under U.S. Patent #’s: 5,451,942; Processing 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535;
Inhaltszusammenfassung zur Seite Nr. 7
Front & Rear Panels Front Panel North American and Asian models European models The actual front panel has various logos printed on it. They are not shown here for clarity. The page numbers in parentheses show where you can find the main explanation for each item. ON/STANDBY button (32) MUSIC button (49) Set the AV receiver to On or Standby. Selects the listening modes intended for use with music. STANDBY indicator (32) Lights up when the AV receiver is on Standby and
Inhaltszusammenfassung zur Seite Nr. 8
Front & Rear Panels—Continued For detailed information, see the pages in parentheses. DISPLAY button (40, 44) PHONES jack (40) Displays various information about the currently This 1/4-inch phone jack is for connecting a selected input source. standard pair of stereo headphones for private listening. SETUP button Opens and closes the setup menus. MUSIC OPTIMIZER button (41, 61) Turns the Music Optimizer on or off. TUNING, PRESET, Arrow, and ENTER buttons Input selector buttons (38) When
Inhaltszusammenfassung zur Seite Nr. 9
Front & Rear Panels—Continued Rear Panel DIGITAL IN COAXIAL AM and FM ANTENNA These coaxial digital audio inputs are for The AM push terminals are for connecting an AM connecting components with a coaxial digital audio antenna. The FM jack is for connecting an FM output, such as a CD player or DVD/BD player. antenna. They’re assignable, which means you can assign MONITOR OUT each one to an input selector to suit your setup. See The composite video jack should be connected to
Inhaltszusammenfassung zur Seite Nr. 10
Front & Rear Panels—Continued VCR/DVR IN/OUT A video component, such as a VCR or DVR, can be connected here for recording and playback. There is composite video input and output jacks for connecting the video signal, and there are analog audio input jacks for connecting the audio signal. DVD/BD IN This input is for connecting a DVD/BD player. There is composite video input jacks for connecting the video signal, and there are analog audio input jacks for connecting the audio signal. SUB
Inhaltszusammenfassung zur Seite Nr. 11
Remote Controller Controlling the AV receiver SP A/B button (13, 38) This button is used to turn speaker sets A and B on To control the AV receiver, press the [RECEIVER] or off. button to select Receiver mode. You can also use the remote controller to control Arrow [ ]/[ ]/[ ]/[ ] and ENTER buttons your DVD/BD player, CD player, and other Used to select and adjust settings. components. See page 62 for more details. SETUP button Used to change settings. LISTENING MODE buttons (49) Used
Inhaltszusammenfassung zur Seite Nr. 12
Remote Controller—Continued Installing the Batteries Aiming the Remote Controller When using the remote controller, point it toward the AV To open the battery compartment, press 1 receiver’s remote control sensor, as shown below. the small lever and remove the cover. Remote control sensor STANDBY indicator AV receiver 30° 30° Insert the two supplied batteries (AA/R6) 2 in accordance with the polarity diagram Approx. 16 ft. inside the battery compartment. (5 m) Notes: The remote controller
Inhaltszusammenfassung zur Seite Nr. 13
Enjoying Home Theater Speaker Sets A and B You can use two sets of speakers with the AV receiver: speaker set A and speaker set B. Speaker set A should be used in your main listening room for up to 5.1-channel playback. * While speaker set B is on, speaker set A is reduced to 2.1-channel playback. Speaker set B can be used in another room and offers 2-channel stereo playback. Speaker set A Speaker set B Indicator Output Set A: 2.1 channels Remote On A B AV receiver Set B: 2 channels On controll
Inhaltszusammenfassung zur Seite Nr. 14
Connecting the AV Receiver The supplied speaker labels are color-coded and you Connecting Your Speakers should attach them to the positive (+) side of each speaker cable in accordance with the above table. All Speaker Configuration you need to do then is to match the color of each label to the corresponding speaker terminal. For the best surround-sound experience, you should connect five speakers and a powered subwoofer. The following table shows which channels you should use based on the
Inhaltszusammenfassung zur Seite Nr. 15
Connecting the AV Receiver—Continued Connecting the Speaker Cables OTHERS FRONT SPEAKERS A 3/8"(10mm) Strip 3/8" (10 mm) of 1 insulation from the 5/8"(15mm) Strip about 5/8" (15 1 ends of the speaker mm) of insulation from cables, and twist the the ends of the bare wires tightly, as speaker cables, and shown. twist the bare wires tightly, as shown. While pressing the lever, 2 insert the wire into the Unscrew the terminal. 2 hole, and then release the lever. Make sure that the termi
Inhaltszusammenfassung zur Seite Nr. 16
Connecting the AV Receiver—Continued If you cannot achieve good reception with the supplied Connecting Antenna indoor FM antenna, try a commercially available This section explains how to connect the supplied indoor outdoor FM antenna instead (see page 17). FM antenna and AM loop antenna, and how to connect Connecting the AM Loop Antenna commercially available outdoor FM and AM antennas. The AV receiver won’t pick up any radio signals without The supplied indoor AM loop antenna is for indoor
Inhaltszusammenfassung zur Seite Nr. 17
Connecting the AV Receiver—Continued Connecting an Outdoor FM Antenna Connecting an Outdoor AM Antenna If you cannot achieve good reception with the supplied If good reception cannot be achieved using the supplied indoor FM antenna, try a commercially available AM loop antenna, an outdoor AM antenna can be used outdoor FM antenna instead. in addition to the loop antenna, as shown. Outdoor antenna Insulated antenna cable AM loop antenna Notes: Outdoor FM antennas work best outside, but usable
Inhaltszusammenfassung zur Seite Nr. 18
Connecting the AV Receiver—Continued AV Connection Color Coding About AV Connections RCA-type AV connections are usually color coded: red, Before making any AV connections, read the manuals white, and yellow. Use red plugs to connect right- supplied with your other AV components. channel audio inputs and outputs (typically labeled “R”). Don’t connect the power cord until you’ve completed Use white plugs to connect left-channel audio inputs and and double-checked all AV connections. outp
Inhaltszusammenfassung zur Seite Nr. 19
Connecting the AV Receiver—Continued Connecting Audio and Video Signals to the AV receiver By connecting both the audio and video outputs of your DVD player and other AV components to the AV receiver, you can switch the audio and video signals simultaneously simply by changing the input source on the AV receiver. : Signal Flow Video Video Audio Audio TV, projector, etc. Speakers (see page 15 for hookup details) DVD/BD player, etc. Which Connections Should I Use? The AV receiver supports severa
Inhaltszusammenfassung zur Seite Nr. 20
Connecting the AV Receiver—Continued Connecting Components with HDMI About HDMI Designed to meet the increased demands of digital TV, HDMI (High Definition Multimedia Interface) is a new digital interface standard for connecting TVs, projectors, DVD/BD players, set-top boxes, and other video components. Until now, several separate video and audio cables have been required to connect AV components. With HDMI, a single cable can carry control signals, digital video, and up to eight channels of
