Inhaltszusammenfassung zur Seite Nr. 1
Contents
Safety Information and Introduction ............2
AV RECEIVER
Table of Contents...........................................6
TX-NR626
Connections .................................................12
Turning On & Basic Operations..................21
Playback........................................................29
Instruction Manual
Advanced Operations ..................................48
Controlling Other Components...................71
Appendix...........................................
Inhaltszusammenfassung zur Seite Nr. 2
Safety Information and Introduction 9. Do not defeat the safety purpose of the polarized B. If liquid has been spilled, or objects have fallen or grounding-type plug. A polarized plug has two into the apparatus, WARNING: blades with one wider than the other. A grounding C. If the apparatus has been exposed to rain or TO REDUCE THE RISK OF FIRE OR ELECTRIC type plug has two blades and a third grounding water, SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN prong. The wide blade or the third prong
Inhaltszusammenfassung zur Seite Nr. 3
Safety Information and Introduction extended period, remove the power cord from the interference in a residential installation. This Precautions AC outlet. equipment generates, uses and can radiate radio 5. Preventing Hearing Loss frequency energy and, if not installed and used in 1. Recording Copyright—Unless it’s for personal Caution accordance with the instructions, may cause harmful use only, recording copyrighted material is illegal Excessive sound pressure from earphones and interfer
Inhaltszusammenfassung zur Seite Nr. 4
Safety Information and Introduction RF Exposure Compliance Modèle pour les Canadien IMPORTANT This equipment complies with FCC/IC radiation The plug is fitted with an appropriate fuse. If the fuse REMARQUE: CET APPAREIL NUMÉRIQUE DE exposure limits set forth for an uncontrolled needs to be replaced, the replacement fuse must LA CLASSE B EST CONFORME À LA NORME environment and meets the FCC radio frequency approved by ASTA or BSI to BS1362 and have the NMB-003 DU CANADA. (RF) Exposure Guidel
Inhaltszusammenfassung zur Seite Nr. 5
Safety Information and Introduction –Hiermit erklärt Onkyo Corporation, dass sich das essentiële eisen en de andere relevante bepalin- 23764/SDPPI/2012 Complies with 2371 Gerät TX-NR626 in Übereinstimmung mit den gen van richtlijn 1999/5/EG. IDA Standards DA106032 grundlegenden Anforderungen und den übrigen –Niniejszym Onkyo Corporation deklaruje że einschlägigen Bestimmungen der Richtlinie TX-NR626 jest zgodny z zasadniczymi TA-20120424004 1999/5/EG befindet. TRA wymaganiami i innymi w ła ś
Inhaltszusammenfassung zur Seite Nr. 6
Safety Information and Introduction Initial Setup .................................................................22 Table of Contents Selecting the Language Advanced Operations for the On-screen Setup Menus .............................22 Audyssey MultEQ: Auto Setup .................................22 On-screen Setup......................................................... 48 Source Connection ...................................................23 Safety Information and Introduction Using the
Inhaltszusammenfassung zur Seite Nr. 7
Safety Information and Introduction Connections Features 6 HDMI Inputs and 2 Outputs Amplifier * 4K (up-scaling and Passthrough )-compatible HDMI Inputs 95 Watts/Channel @ 8 ohms (FTC) * Compatible with HDMI IN 1 to HDMI IN 4 only 160 Watts/Channel @ 6 ohms (IEC) Onkyo for System Control 175 Watts/Channel @ 6 ohms (JEITA) 3 Digital Inputs (1 Optical/2 Coaxial) WRAT–Wide Range Amplifier Technology Component Video Switching (1 Input/1 Output) (5 Hz to 100 kHz bandwidth) Ba
Inhaltszusammenfassung zur Seite Nr. 8
Safety Information and Introduction Front & Rear Panels Front Panel (North American and Taiwanese models) (European, Australian and Asian models) For detailed information, see the pages in MEMORY button (38) AUX INPUT AUDIO/VIDEO jacks parentheses. TUNING MODE button (38) USB port (32) ON/STANDBY button (21) DISPLAY button (45) SETUP MIC jack (25) MUSIC OPTIMIZER button (North American HOME button (47) HYBRID STANDBY indicator (22) and Taiwanese m
Inhaltszusammenfassung zur Seite Nr. 9
Safety Information and Introduction Display s For detailed information, see the pages in Tuning indicators NET indicator (32 to 36, 67) parentheses. RDS indicator (excluding North American and Message area Z2 (Zone 2) indicator (70) Taiwanese models) (39) SLEEP indicator (45) AUTO indicator (38) 3D indicator Channel/Unit indicators This lights when a 3D input signal is detected. TUNED indicator (38) ch indicator FM STEREO indicator (38) Headphone indicator (20) Hz
Inhaltszusammenfassung zur Seite Nr. 10
Safety Information and Introduction Rear Panel (North American, European, Australian and Asian models) (Taiwanese models) See “Connecting Your Speakers” for connection Power cord (North American, European, (➔ pages 12 to 20). Australian and Asian models) REMOTE CONTROL jack DIGITAL IN COAXIAL and OPTICAL jacks COMPONENT VIDEO IN and OUT jacks GND screw ETHERNET port Composite video and analog audio jacks FM ANTENNA jack and AM ANTENNA terminal (BD/DVD IN, CBL/SAT I
Inhaltszusammenfassung zur Seite Nr. 11
Safety Information and Introduction *1 To control a component, you must first enter the remote For detailed information, see the pages in Remote Controller control code. parentheses. See “Entering Remote Control Codes” for more details RECEIVER button (21) (➔ page 71). Controlling the AV Receiver *2 REMOTE MODE/INPUT SELECTOR buttons These buttons can also be used when a REMOTE (29) MODE other than Receiver mode is selected. To control the AV receiver
Inhaltszusammenfassung zur Seite Nr. 12
Connections To find the best position for your subwoofer, while Speaker Configuration playing a movie or some music with good bass, The following table indicates the channels you should experiment by placing your subwoofer at various use depending on the number of speakers that you positions within the room, and choose the one that have. provides the most satisfying results. No matter how many speakers you use, a powered Connections You can connec
Inhaltszusammenfassung zur Seite Nr. 13
Connections Connecting the Speaker Cables/Powered Subwoofers Before connecting the power cord, connect all of your speakers and AV components. A setup wizard Please connect , , , , and for 5.1-channel surround. is launched upon first-time use to let you perform If you’re using only one surround back the settings. Front Front speaker, connect it to the SURROUND speaker R speaker L BACK or FRONT HIGH L terminals. Read the instructions supplied with your speakers. By
Inhaltszusammenfassung zur Seite Nr. 14
Connections ■ Speaker Connection Precautions Don’t connect more than one cable to each speaker Bi-amping the Front Speakers terminal. Doing so may damage the AV receiver. (North American and Taiwanese models) You can connect speakers with an impedance of Don’t connect one speaker to several terminals. Important: between 6 and 16 ohms. If you use speakers with a When making the bi-amping connections, be sure to lower impedance, and use the amplifier at high remove the jumper bars tha
Inhaltszusammenfassung zur Seite Nr. 15
Connections Use this jack to connect to the Satellite/cable set- Connecting the TV/AV components top box, etc. Use this jack to connect to the game consoles, Before connecting the power cord, connect all of your speakers and AV components. To display the setup etc. menu on the TV screen, connecting the TV to HDMI OUT MAIN is required. Use this port to connect to a LAN port on a router so the AV receiver can be connected to your home network. Use jack and terminal her
Inhaltszusammenfassung zur Seite Nr. 16
Connections ■ MHL (Mobile High-Definition Link) Connecting to the Network (Optional) With its support for MHL (Mobile High-Definition Link), The AV receiver allows interoperability of the CEC The following diagram shows how you can connect HDMI IN 1 allows you to deliver high-definition video (Consumer Electronics Control) specified in the HDMI the AV receiver to your home network. In this from a connected mobile device. standard, which is known as RIHD. Various linked example, it’s
Inhaltszusammenfassung zur Seite Nr. 17
Connections On the TV, when you select anything other than the HDMI Operations that can be performed with Confirm the settings jack to which the AV receiver is connected, the input on the RIHD connection AV receiver will be switched to “TV/CD”. 1. Turn on the power for all connected components. The AV receiver will automatically power on in conjunction 2. Turn off the power of the TV, and confirm that the ■ For -compatible TV when it determines it to be necessary. Even if the A
Inhaltszusammenfassung zur Seite Nr. 18
Connections Signal Selection Example Tip Video Signal Flow Chart Blu-ray Disc/DVD player, etc. When a signal is input via HDMI and the corresponding Blu-ray Disc/DVD player, etc. input selector is selected, the HDMI indicator lights. In the case of an optical or coaxial connection, the DIGITAL Composite Component HDMI Composite Component HDMI indicator lights. In the case of an analog connection, neither IN IN of the HDMI and DIGITAL indicators light. AV receiver AV receiver MONITOR OUT MO
Inhaltszusammenfassung zur Seite Nr. 19
Connections ■ Optical digital audio Connecting the Antennas Optical digital connections allow you to enjoy digital *1 sound such as PCM , Dolby Digital or DTS. The This section explains how to connect the supplied indoor FM antenna and AM loop antenna. audio quality is the same as coaxial. The AV receiver won’t pick up any radio signals without any antenna connected, so you must connect the antenna to use the tuner. (North American and (European, Australian ■ Coaxial digital audio Taiwanese
Inhaltszusammenfassung zur Seite Nr. 20
Connections Connecting Onkyo RI Components Using Headphones Make sure that each Onkyo component is Connect a pair of stereo headphones with a 1 1 connected with an analog audio cable standard plug (1/4 inch or ø 6.3 mm) to the (connection in the hookup examples) PHONES jack. (➔ page 15). While the headphones plug is inserted in the Make the connection (see the illustration). PHONES jack, indicator lights. 2 Note If you’re using an RI Dock, or cassette tape 3 Always turn d
