Inhaltszusammenfassung zur Seite Nr. 1
AUDIO - VIDEO SURROUND RECEIVER
KRF-V7771D
INSTRUCTION MANUAL
KENWOOD CORPORATION
Important: Setup the Remote Control First
To operate your audio system correctly, it is important to first program your remote control.
The operation modes on your remote enable to control over the receiver and other components
in your system. Read and understand the instructions for the remote, especially how to switch
operation modes.
Quick Start
To enable surround-sound in the shortest amount of time, follow th
Inhaltszusammenfassung zur Seite Nr. 2
Introduction Introduction KRF-V7771D (En/T) Caution : Read this section carefully to ensure safe operation. Before applying power 2 Units are designed for operation as follows. U.K. and Europe ........................................................................ AC 230 V only For the United Kingdom Factory fitted moulded mains plug 1.The mains plug contains a fuse. For replacement, use only a 13-Amp ASTA-approved (BS1362) fuse. 2.The fuse cover must be refitted when replacing the fuse in the
Inhaltszusammenfassung zur Seite Nr. 3
Introduction KRF-V7771D (En/T) Caution : Read the pages marked carefully to ensure safe operation. Contents 3 The description headlines marked with the I (star) symbols show the shortest way to perform Surround Sound playback. Introduction .................................................................................................................................................................... 2 Before applying power ......................................................................
Inhaltszusammenfassung zur Seite Nr. 4
Introduction Introduction KRF-V7771D (En/T) Special features 4 True home theater sound Dolby Digital (AC-3) The Dolby Digital (AC-3) mode lets you enjoy full digital surround from software processed in the Dolby Digital (AC-3) format. Dolby Digital (AC-3) provides up to 5.1 channels of independent digital audio for better sound quality and more powerful presence than conventional Dolby Surround. MPEG MPEG, which stands for “Moving Pictures Experts Group”, is an international standard of digital
Inhaltszusammenfassung zur Seite Nr. 5
Introduction KRF-V7771D (En/T) Before using this unit 5 Compared to standard remote controls, the remote control supplied with this receiver has several operation modes. These modes enable the remote control to perform display operations and control other audio/video components. In order to effectively use the remote control it is important to read the operating instructions and obtain a proper understanding of the remote control and how to switch its operation modes (etc.). Using the remote con
Inhaltszusammenfassung zur Seite Nr. 6
Connections System connections System connections KRF-V7771D (En/T) Connection of audio components 6 The connected components shown here are given as ex- Malfunction of microcomputer amples because the available models may vary depending on marketing areas. If operation is not possible or erroneous display appears even though all connections have been made properly, reset the Make connections as shown below. microcomputer referring to “In case of difficulty”. W When connecting the related syste
Inhaltszusammenfassung zur Seite Nr. 7
System connections KRF-V7771D (En/T) Connection of video components 7 The connected components shown here are given as ex- amples because the available models may vary depending on marketing areas. Make connections as shown below. When connecting the related system components, refer also to the instruction manuals of the related compo- nents. Also connect the system control cords when the KENWOOD Audio Component System is connected. Do not plug in the power lead until all connections are comple
Inhaltszusammenfassung zur Seite Nr. 8
Connections System connections KRF-V7771D (En/T) Digital connections 8 The DIGITAL IN jacks can accept either MPEG, Dolby Digital (AC-3) or PCM (CD Format) signals (the input signal type is Notes on DIGITAL INPUT jacks and connectors detected automatically). When using digital inputs, perform connection and assignment The connected components shown here are given as ex- taking special care in the relations between the input jacks and connection cords. amples because the available models may vary
Inhaltszusammenfassung zur Seite Nr. 9
System connections KRF-V7771D (En/T) 9 LASER DISC RF DEMODULATOR DEM-9991D (Optional) 1 2 3 4 56 7 8 DIGITAL OUTPUT RF INPUT DIGITAL INPUT DC IN COAX. AC-3 RF COAX. OPT. LASER DISC RF DEMODULATOR DEM-9991D RF Place the power supply away from the demodulator, receiver, LOCK POWER and any antennas. OFF OPT. COAX. EXTERNAL DC SUPPLY DC 12V 1 POWER switch 5 RF INPUT AC-3 RF (Dolby Digital RF) Use to switch the POWER OFF/ POWER ON (OPT./ COAX.). Connect this jack to the Dolby Digital (AC-3)
Inhaltszusammenfassung zur Seite Nr. 10
Connections System connections KRF-V7771D (En/T) Connecting the system control 10 Connecting system control cords lets you take advantage of convenient system control operations. There are two types of KENWOOD system control modes. Make connections according to the groups of terminal symbols shown below. Ä Mode : lets you combine f, Ä, and F terminals Mode : for terminals only This unit is compatible with both [XS8] and [SL16] modes. It comes from the factory set to the [SL16] mode. To switch
Inhaltszusammenfassung zur Seite Nr. 11
System connections KRF-V7771D (En/T) Connecting a surround processor 11 Make connections as shown below. When connecting the related system components, refer also to the instruction manuals of the related compo- nents. Do not plug in the power lead until all connections are completed. The sound input to VIDEO 4 6CH. DVD player INPUT is paired with the video signal input to VIDEO 4. VIDEO OUT FRONT Multi-channel SURROUND surround processor CENTER SUBWOOFER Be sure to move the VIDEO 4 INPUT swit
Inhaltszusammenfassung zur Seite Nr. 12
Connections System connections KRF-V7771D (En/T) Speaker connections/ PRE OUT connections 12 Make connections as shown below. Do not plug in the power lead until all connections are When connecting the related system components, refer also completed. to the instruction manuals of the related components. 1 Strip coating. Front Center Speaker Front Speakers A (4W ~16W ) SpeakersA (4W ~16W ) (4W ~16W ) 2 Loosen. Left Right »
á
á
»
Powered »
á
Ö Never short circuit the + and – subwoofer speak
Inhaltszusammenfassung zur Seite Nr. 13
System connections KRF-V7771D (En/T) Connecting the antennas 13 Make connections as shown below. Do not connect the power cord to a wall outlet until all connections are completed. Antenna terminal connections 1 Push lever. 2 Insert cord. 3 Return lever. AM loop antenna The supplied loop antenna is for indoor use. Place it as far as possible from the receiver, TV set, speaker cords and power cord, and adjust the direction for best reception. AM loop antenna AM GND -FM 75W ANTENNA FM indoor ant
Inhaltszusammenfassung zur Seite Nr. 14
Setup Controls and indicators KRF-V7771D (En/T) MUTE indicator Multi-mode display 14 MUTE MUTE ST. ST. TUNED TUNED Stereo indicator TUNED indicator Display CLIP INDICATOR DOLBY DIGITAL MPEG Cinema Re-EQ VOLUME INPUT SELECTOR A SPEAKERS MUTE DISPLAY MODE B ON/STANDBY DOWN UP POWER ON OFF CD2 / TAPE2 MONITOR PHONES S VIDEO VL AV AUX -AUDIO-R 1 2 3 4 5 6 7 8 90 ! @ # $ % ^ & 1POWER key MPEG : $AUDIO (L, R) input jacks (AV AUX) Lights when the MPEG is activated. Press to switch the main
Inhaltszusammenfassung zur Seite Nr. 15
Setup of the remote control unit KRF-V7771D (En/T) Controls and indicators 15 45 3 Note Note Note Perform “Model Type Setup” 1 of the remote control before Main MD/ CD2/ Input Input ENTER Tape1 Tape2 Analog Menu Digital Phono CD1 CD2 Tuner using it. ^ 6 Remote Macro Mode VOLUME The following menu display ap- TV1 TV2 Video1 Video2 Video3 Video4 AV AUX 2 pears after the batteries are p Setu Surround loaded for the first time. SP Selection 7 MUTE CONFIRM SP Distance Model Type Setup SP Level Mode
Inhaltszusammenfassung zur Seite Nr. 16
Setup Setup of the remote control unit KRF-V7771D (En/T) Setting up the remote control according to your receiver 16 Perform the following procedure after inserting batteries for Low battery alarm the first time or when the remote control back-up data has been lost. When the alarm message appears to indicate that the Preparations Low remaining power is low, re- y Batter place all the batteries with Ö Press the POWER key and ON/STANDBY key of the receiver to new ones. turn it ON. Model Type Setup
Inhaltszusammenfassung zur Seite Nr. 17
Setup of the remote control unit KRF-V7771D (En/T) Basic operation 17 Note Note Note Main MD/ CD2/ Input Input ENTER Menu Tape1 Tape2 Digital Analog Phono CD1 CD2 Tuner The display’s backlight will be Remote Macro turned off if the remote control Mode VOLUME TV1 TV2 Video1 Video2 Video3 Video4 AV AUX p was left for several seconds S eaker Selection p without any operation. In this Quick Setu case, touch any key to turn the MUTE SW C S Entr CONFIRM display back on. No Yes Yes Next Ö When the di
Inhaltszusammenfassung zur Seite Nr. 18
Setup Setup of the remote control unit KRF-V7771D (En/T) Navigating through the screens of remote control unit 18 The remote control unit is given with a hierarchical structure so that it can display a large number of functions. For instance, the menu screens for use in setup can be accessed from the “Main Menu” screen as shown below. 1 To display the “Main Menu” screen, first select the “Main Menu” icon from the segment screen. Main MD/ CD2/ Input Input Menu Tape1 Tape2 Digital Analog Phono CD1
Inhaltszusammenfassung zur Seite Nr. 19
Setup for controlling AV components KRF-V7771D (En/T) Assigning the connected components to the selected inputs 19 General setup flow 1Open the “Setup” menu and select “IR” icon. The TV icons that appear on the segment screen after the 2Assign the connected components to the dis- setup allow you to use the remote control to control your TV played inputs. without connecting it to the receiver as an input. 3Assign all the connected components. Open the “Setup” menu and select “IR” icon. 1 Main MD/
Inhaltszusammenfassung zur Seite Nr. 20
Setup Setup for controlling AV components KRF-V7771D (En/T) (Futureset) Setup of components which are not listed in the Setup Codes chart 20 This service will be available until 31 March 2001. If your connected components are not listed in the Setup Codes chart, its’ setup codes can be downloaded through a telephone line. Write down the brand name and model number of your component in the space provided before 1 your call. Type Brand Model No. Remote Model No. Type Brand Model No. Remote Model
