Inhaltszusammenfassung zur Seite Nr. 1
3-864-483-41(1)
FM Stereo
FM-AM Receiver
EN
Operating Instructions
F
Mode d’emploi
ES
Manual de instrucciones
STR-DE925
1998 by Sony Corporation
Inhaltszusammenfassung zur Seite Nr. 2
WARNING Precautions On safety To prevent fire or shock Should any solid object or liquid fall into hazard, do not expose the the cabinet, unplug the receiver and have it unit to rain or moisture. checked by qualified personnel before operating it any further. On power sources • Before operating the receiver, check that the operating voltage is identical with your local power supply. The operating voltage is indicated on the nameplate at the rear of the receiver. • The unit is not disconnected f
Inhaltszusammenfassung zur Seite Nr. 3
About This Manual TABLE OF CONTENTS The instructions in this manual are for model STR-DE925. Check your model number by looking at the upper right Hooking Up the Components 4 corner of the front panel. Unpacking 4 Antenna Hookups 5 Conventions Audio Component Hookups 6 • The instructions in this manual describe the controls on the receiver. You can also use the controls on the Video Component Hookups 7 supplied remote if they have the same or similar names Digital Component Hookups 8 as those o
Inhaltszusammenfassung zur Seite Nr. 4
Unpacking Hooking Up the Check that you received the following items with the remote: • FM wire antenna (1) Components • AM loop antenna (1) • Remote commander RM-LJ301 (remote) (1) • LR6 (size-AA) alkaline batteries (3) This chapter describes how to connect Inserting batteries into the remote various audio and video components Insert three size-AA (LR6) alkaline batteries with the + to the receiver. Be sure to read the and – properly oriented in the battery compartment. sections for the compon
Inhaltszusammenfassung zur Seite Nr. 5
Hooking Up the Components Antenna Hookups AM loop antenna FM wire antenna (supplied) (supplied) ANTENNA TV/LD DVD VIDEO 2 VIDEO 1 MONITOR REAR CENTER DIGITAL AC OUTLET DVD IN AM + + WOOFER OPTICAL AUDIO VIDEO VIDEO VIDEO VIDEO VIDEO VIDEO VIDEO S-LINK TV / LD IN OUT WIRELESS IMPEDANCE IN IN OUT IN OUT IN OUT CTRL A1 RL REAR SELECTOR OPTICAL y SPEAKER FRONT MD/DAT IN COAXIAL – – AUDIO AUDIO AUDIO AUDIO AUDIO AUDIO 4 Ω 8 Ω OPTICAL IN IN OUT IN OUT IN FM MD/DAT OUT 75Ω L OPTICAL DVD IN R A A
Inhaltszusammenfassung zur Seite Nr. 6
Hooking Up the Components Audio Component Hookups Required cords Audio cords (not supplied) MD/DAT deck When connecting a cord, be sure to match the color-coded pins to INPUT OUTPUT LINE LINE the appropriate jacks on the components. L White (L) White (L) R Red (R) Red (R) IN OUT Turntable ANTENNA TV/LD DVD VIDEO 2 VIDEO 1 MONITOR REAR CENTER DIGITAL AC OUTLET DVD IN AM + + WOOFER OPTICAL AUDIO VIDEO VIDEO VIDEO VIDEO VIDEO VIDEO VIDEO S-LINK TV / LD IN OUT IN IN OUT IN OUT IN OUT WIRELE
Inhaltszusammenfassung zur Seite Nr. 7
Hooking Up the Components
Video Component Hookups Required cords Audio/video cords (not supplied) TV tuner or LD player When connecting a cord, be sure to match the color-coded pins to OUTPUT AUDIO OUT VIDEO RL OUT VCR the appropriate jacks on the components. INPUT OUTPUT Yellow (video) Yellow (video) VIDEO VIDEO IN OUT White (L/audio) White (L/audio) DVD player AUDIO AUDIO IN OUT OUTPUT Red (R/audio) Red (R/audio) L AUDIO OUT VIDEO RL OUT R Video cord for connecting a TV monitor (not supp
Inhaltszusammenfassung zur Seite Nr. 8
• • • • • • Hooking Up the Components • • • • • • • • • • 5 46 3 7 2 8 g 1 9 0 10 Digital Component Hookups Connect the digital output jacks of your DVD player and Required cords TV tuner (etc.) to the receiver’s digital input jacks to bring Optical digital cords (not supplied) the multi channel surround sound of a movie theater into Black Black your home. To enjoy full effect of multi channel surround sound, five speakers (two front speakers, two rear
Inhaltszusammenfassung zur Seite Nr. 9
Hooking Up the Components
Connect the digital output jack of your MD or DAT deck Required cords to the receiver’s digital input jack and connect the digital Optical digital cords (not supplied) input jack of your MD or DAT deck to the receiver’s digital output jack. These connections allow you to make Black Black digital recordings of a CDs played back through your DVD (or LD player) and TV broadcasts. Audio cords (not supplied) When connecting a
Inhaltszusammenfassung zur Seite Nr. 10
Hooking Up the Components Other Hookups Required cords CONTROL A1 connecting cord (not supplied) Black Black AC power cord S-LINK CTRL A1 AC OUTLET* ANTENNA TV/LD DVD VIDEO 2 VIDEO 1 MONITOR REAR CENTER DIGITAL AC OUTLET DVD IN AM + + WOOFER OPTICAL AUDIO VIDEO VIDEO VIDEO VIDEO VIDEO VIDEO VIDEO S-LINK TV / LD IN OUT WIRELESS IMPEDANCE IN IN OUT IN OUT IN OUT CTRL A1 RL REAR SELECTOR OPTICAL y SPEAKER FRONT MD/DAT IN COAXIAL – – AUDIO AUDIO AUDIO AUDIO AUDIO AUDIO 4 Ω 8 Ω OPTICAL IN IN OUT
Inhaltszusammenfassung zur Seite Nr. 11
Hooking Up the Components Connecting the AC power cord Before connecting the AC power cord of this receiver to a wall outlet: • Connect the speaker system to the receiver (see page 13). • Turn the MASTER VOLUME control to the leftmost position (0). Connect the AC power cord(s) of your audio/video components to a wall outlet. If you connect other audio/video components to the AC OUTLET(s) on the receiver, the receiver will supply power to the connected component(s), allowing you to turn the whole
Inhaltszusammenfassung zur Seite Nr. 12
• • • • • • • • • • • • • • • 5 46 3 7 2 8 g 1 9 • 0 10 SET UP Hooking Up SOUND FIELD ON/OFF and Setting Up MASTER VOLUME MULTI CHANNEL DECODING CURSOR MODE SOUND SURROUND FIELD EQUALIZER EQ SET UP BASS INDEX BOOST SPEAKERS A SOUND FIELD OFF B BALANCE ON/OFF the Speaker A+B FUNCTION DISPLAY DIRECT SOUND FIELD MUTING TUNING 1 2 3 4 5 VIDEO 1 VIDEO 2 VIDEO 3 DVD TV/LD GENRE MODE TUNING PRESET – + – TUNING + INPUT BASS LR SHIFT 6 7 8 9 0 TAPE MD/DAT CD TUNER PHONO MODE BOOST PHONES EQ ON/OFF
Inhaltszusammenfassung zur Seite Nr. 13
Hooking Up and Setting Up the Speaker System Speaker System Hookup Required cords Speaker cords (not supplied) One for each front, rear, and center speaker Rear speaker (R) Rear speaker (L) Center speaker (+) (+) (–) (–) Monaural audio cord (not supplied) IMPEDANCE One for an active woofer SELECTOR Black Black WIRELESS REAR SPEAKER ANTENNA TV/LD DVD VIDEO 2 VIDEO 1 MONITOR REAR CENTER DIGITAL AC OUTLET DVD IN AM WOOFER + + OPTICAL AUDIO VIDEO VIDEO VIDEO VIDEO VIDEO VIDEO VIDEO TV / LD IN S-L
Inhaltszusammenfassung zur Seite Nr. 14
Hooking Up and Setting Up the Speaker System Speaker System Hookup Multi-Channel Surround Setup For the best possible surround sound all speakers should Speaker impedance be the same distance from the listening position (A). To enjoy multi channel surround, connect front, center, (However, this unit lets you to place the center speaker up and rear speakers with a nominal impedance of 8 ohms or to 1.5 meters (5 feet) closer (B) and the rear speakers up higher, and set the speaker IMPEDANCE SELECT
Inhaltszusammenfassung zur Seite Nr. 15
Hooking Up and Setting Up the Speaker System Depending on the shape of your room (etc.), you may p Front speaker size (FRONT) wish to place the rear speakers behind you instead of on Initial setting : LARGE the side walls. One advantage of this placement is that • If you connect large speakers that will effectively you can use a pair of large floor standing speakers reproduce bass frequencies, select “LARGE”. Normally, matching your front speakers. select “LARGE”. • If the sound is distorted, or
Inhaltszusammenfassung zur Seite Nr. 16
Hooking Up and Setting Up the Speaker System Multi-Channel Surround Setup z About speaker sizes (LARGE and SMALL) p Rear speaker height (REAR HGT.)* Internally, the LARGE and SMALL settings for each speaker Initial setting : LOW determine whether or not the internal sound processor will cut This parameter lets you specify the height of your rear the bass signal from that channel. When the bass is cut from a speakers for proper implementation of the Digital Cinema channel, the bass redirection ci
Inhaltszusammenfassung zur Seite Nr. 17
Hooking Up and Setting Up the Speaker System p Sub woofer selection (WOOFER) p Rear speaker distance (REAR) Initial setting : YES Initial setting : 3.5 meter • If you connect a sub woofer, select “YES”. Set the distance from your listening position to the rear • If you do not connect a sub woofer, select “NO”. This (left or right) speaker. activates the Dolby Digital (AC-3) bass redirection • Rear speaker distance can be set in 0.1 meter (1 foot) circuitry and outputs the LFE signals from other
Inhaltszusammenfassung zur Seite Nr. 18
Hooking Up and Setting Up the Speaker System Multi-Channel Surround Setup Notes Adjusting the speaker volume • The rear balance, center level, and rear level are shown in the Use the remote while seated in your listening position to display during adjustment. adjust the volume of each speaker. • Although these adjustments can also be made via the front panel using the CURSOR MODE menu SURROUND Note parameters (when the test tone is output, the CURSOR MODE This unit incorporates a new test tone w
Inhaltszusammenfassung zur Seite Nr. 19
• • • • • • • • • • • • Hooking Up and Setting Up the Speaker System • • • • • • • • • • • • • • • • • • 5 46 3 7 2 8 g 1 9 0 10 • 5 46 3 7 2 8 g 1 9 0 10 • Before You Use Your Receiver Before turning on the receiver Checking the connections Make sure that you have: After connecting all of your components to the receiver, • Turned MASTER VOLUME to the leftmost position (0). do the following to verify that the connections were made • Selected the appropriate front speakers (see “8 correctly. SPEA
Inhaltszusammenfassung zur Seite Nr. 20
Hooking Up and Setting Up the Speaker System Before You Use Your Receiver There’s no sound from a specific component. / Check that the component is connected correctly to the audio input jacks for that component. / Check that the cord(s) used for the connection is (are) fully inserted into the jacks on both the receiver and the component. No sound is heard from one of the front speakers. / Check that the BALANCE control is set at center position (see “6 BALANCE control” on page 23). / Connect a
