Bedienungsanleitung Extron electronic sTLP 350MV

Inhaltszusammenfassung zur Seite Nr. 1

Extr Extron on
TLP 350MV • Setup Guide
Overview
® ™
The Extron TLP 350MV is a wall-mounted TouchLink Panel that
provides simple and versatile configuration and control for a range
®
of IP Link control systems.
Graphic and text objects are displayed on the screen. These objects
have system control functions associated with them and the
Touchpanel allows you to control those functions.
Two BNC connectors allow the screen to be used to preview composite video or S-video.
NOTE: The RJ-45 output

Inhaltszusammenfassung zur Seite Nr. 2

TLP 350MV • Setup Guide (Continued) Mounting the TLP 350MV Decide where to mount the TLP 350MV and whether to use a 3-gang mud ring or a 3-gang UL-certified junction box. The mounting instructions are slightly different depending on your choice: Using a Mud Ring 1. Use the template provided with the mud ring to mark Locking Arms (4) the wall. For the mud ring provided, the hole must be 5 25/32 inches (14.68 cm) wide x 3 7/8 inches (9.83 cm) high. 4 2. Cut a hole in the wall. To avoid making t

Inhaltszusammenfassung zur Seite Nr. 3

Using a UL-Certified Junction Box 1. Locate a wall stud and mark the position where the junction box will be placed. Use the size specifications provided by the manufacturer. Wall Stud 2. Cut a hole in the wall. To avoid making the hole too big, cut 4 inside the lines you marked in step 1. Junction Box 3. Test the fit by inserting the junction box into the hole in the wall. If necessary, use a rasp or file to enlarge the hole. 5 4. Insert the junction box into the hole in the wall. Secure it

Inhaltszusammenfassung zur Seite Nr. 4

TLP 350MV • Setup Guide (Continued) Calibration Screen + + 1. Press the recessed Menu button on the front panel a second time to open the calibration screen. This screen adjusts the precision of the screen to the location of the finger touch. 2. Press the green button until it changes color. Press and Hold 3. Calibrate the next button. When all four points have been calibrated, Highlighted Box the screen reopens to the main setup screen. Until Color Changes 4. Press Exit to close the on-screen