Bedienungsanleitung VocoPro Club-8000

Inhaltszusammenfassung zur Seite Nr. 1

Quick Start
CLUB-8000
Quick Reference Setup Guide
This quick reference guide is provided to help you set up your
CLUB-8000 system for the first time. It contains instructions
on setting up the products that are included in the CLUB-
8000. If you are connecting any additional gear that is not
included in the CLUB-8000, refer to the appropriate manuals
for detailed instructions.

Gathering Package Contents
The first step to putting together your new CLUB-8000 system is unpacking all of the

Inhaltszusammenfassung zur Seite Nr. 2

Setting up the speakers and speaker stands VX-15 Speaker 1. Setup each SS-88 speaker stand by extending the support legs to a position that is stable and tighten the tension mecha- nism firmly. 1 1/4” 2. Place a VX-15 speaker on top of the SS-88 so that the shaft of the SS-88 fits flush into the mounting cavity on the bottom of the VX-15. NOTE: Each end of the SS-88 pole has a particular diameter fitted for common speakers’ mounting cavities. If the SS-88 shaft does NOT fit flush into the

Inhaltszusammenfassung zur Seite Nr. 3

CDG-9000 PRO player unit to KJM-8000+ 2 You have the option of either connecting each deck of the CDG-9000 PRO separately (Fig. 1) or together through a single SWITCHED output (Fig. 2). Separately through individual deck outputs (Fig.1) Using RCA cables: 1. For each deck, connect the L/R (red & white) audio outputs and Video (yellow) output on the CDG-9000 PRO to the CDG(1) and DVD(3) inputs on the rear panel of the KJM-8000+ CDG-9000 PRO Player CDG(1 ) CDG(1 ) D V D ( 2 ) D

Inhaltszusammenfassung zur Seite Nr. 4

VP-2100 PRO to VX-15 speakers 4 VP-2100 PRO Amplifier Speakers 1 and 2 -BRIDGE + CH 2 CH 1 Using the SPEAKON style to ¼” adapter and ¼”(m) to STERE O 50Hz ON THROUGH THROUG H ¼”(m) cable (included): M O N O 30Hz OFF BRIDGE LOW CUT FILTER/ 1. Connect the SPEAKON style end to CH.1 on the rear MODEL VP-2100PRO SPEAKER OUTPUTS BALANCED INPUTS panel of the VP-2100 PRO 2. Connect one end of the ¼” cable to the ¼” end of the adapter 3. Connect the other end of the ¼” cable to o