Inhaltszusammenfassung zur Seite Nr. 1
Conforms to
UL 6500
Certified to
NEWMARKET, NH USA
CSA C22.2 No1-94
DPA-1 .2 68835
Russound DPA-1.2
Tested to Comply
with FCC Standards
FOR HOME OR OFFICE USE
POWER
DESIGNED IN THE USA
SERIAL #
MADE IN TAIWAN
DPA-1.2
Instruction Manual
2 Channel Amplifier
with Auto A/B Selector
Conforms to
UL 6500
NEWMARKET, NH USA Certified to
CSA C22.2 No1-94
DPA-1 .2
68835
Russound DPA-1.2
Tested to Comply
with FCC Standards
FOR HOME OR OFFICE USE
POWER
DESIGNED IN THE USA
SERIAL #
MADE IN TAIWAN
VIDEO
G
Inhaltszusammenfassung zur Seite Nr. 2
1. SAFETY INSTRUCTIONS 6. Carts and Stands - The appliance should be used only with a cart or stand that is recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force and uneven surfaces may cause the appliance and cart “WARNING” “ TO REDUCE THE RISK combination to over- OF FIRE OR ELECTRIC SHOCK, DO turn. NOT EXPOSE THIS APPLIANCE TO RAIN 7. Wall or ceiling OR MOISTURE.” Mounting - The appli- ance should be mounted to “CAUTION” “
Inhaltszusammenfassung zur Seite Nr. 3
14. Non-use Periods - The power cord of Precautions the appliance should be unplugged 1. Do Not Touch The DPA-1.2 With Wet from the outlet when left unused for a Hands. Do not handle the DPA-1.2 or long period of time. power cord when your hands are wet 15. Object and Liquid Entry - Care should or damp. If water or any other liquid be taken so that objects do not fall enters the DPA-1.2 cabinet, take the and liquids are not spilled into the DPA-1.2 to qualified service personal enclosure through
Inhaltszusammenfassung zur Seite Nr. 4
2. INTRODUCTION Congratulations on your recent purchase of the Russound DPA-1.2 two-channel amplifier. The DPA-1.2 is a high-current, high-quality amplifier, which includes automatic A/B switching. The DPA-1.2 two-channel amplifier will amplify a source at the sensing line input or the sensing speaker level input. Switching between a default audio source and a local source, the DPA-1.2 is ideally suit- ed for those applications that require automatic switching and amplification. The DPA-1.2 powe
Inhaltszusammenfassung zur Seite Nr. 5
LINE OUTPUTS VIDEO LEFT AMPLIFIED OUTPUT RIGHT TO ROOM SPEAKERS VIDEO GAIN LINE INPUT 12V INPUT SENSING LR TRIG SENSING DELAY INPUT 5 1 L 4 2 3 12V TRIG WARNING : SHOCK OUT 100mA HAZARD – DO NOT OPEN R AVIS : RISQUE DE CHOC ELECTRIQUE – NES PAS OUVRIR. SPEAKER A OUT AMPLIFIED INPUT * FOR BRIDGED OPERATION SENSING SEE MANUAL AC 120V 60Hz 1.5A~ DEFAULT SPEAKER B OUT AMPLIFIED INPUT AMPLIFIED INPUT FROM AUDIO DISTRIBUTION SYSTEM 5 STEREO BRGD * MONO
Inhaltszusammenfassung zur Seite Nr. 6
4. FRONT PANEL Power Switch: Turns on the main power for the ampli- POWER fier. When the power is on, the LED will be illuminated. 5. BACK PANEL CONNECTIONS LINE INPUT SENSING Line Input: This line input is a sensing input that will activate the DPA-1.2 L when an audio signal is present. When there is no audio, the amplifier will go into standby or default back to the R whole-house amplified signal if playing. AMPLIFIED INPUT Speaker Level Input: The speaker level input is a SENSING sensing in
Inhaltszusammenfassung zur Seite Nr. 7
Speaker Outputs: The A and B speaker outputs are in parallel to the amplifier output. When connected to the A or B output, either 6- ohm or 8-Ohm speakers could be used. When using both A and B speaker outputs, only speakers with impedance higher than 8 Ohms can be connected. For Bridge amplifier operation, connect the + of the speaker to the R+ and - of the speaker to the L+ of the amplifier. Mono Bridged Operation FIRST DPA-1.2 AMPLIFIER SECOND DPA-1.2 AMPLIFIER LEFT SPEAKER RIGHT SPEAKER 8 OH
Inhaltszusammenfassung zur Seite Nr. 8
12-Volt Trigger In and Out: The Trigger 12V 12V TRIG TRIG output is 12 volts at a maximum of OUT 100mA INPUT 100mA. This can be used to drive a relay- operated AC outlet or other 12-volt triggered devices. The 12-volt trigger input is used to activate the DPA-1.2 independently from the auto turn on sensing circuit, in which case the delay, video and audio sensing are bypassed. Delay Time: The delay timecan be adjusted from about DELAY 5 1 0.3 minutes to 8 minutes. The DPA-1.2 amplifier will 4
Inhaltszusammenfassung zur Seite Nr. 9
6. SPECIFICATIONS Audio power output: Continuous 35W @ 8 Ohms, 45W @ 6 Ohms. Frequency response: 20HZ to 20KHZ -0.3dB. Total harmonic distortion: 0.05% 8 Ohm .075% 6 Ohm Input sensitivity: 400mV line Input impedance: 22k Line Input Signal to noise ratio: 85dB Input trigger: 12VDC 10k Output trigger: 12VDC 100mA Auto off delay time: 2 to 10 minutes Primary fuse: T2.0A /250V Power requirements: Factory set for 120 VAC 60Hz or 230 VAC 50Hz. 2 terminal detachable power cord For 230VAC operation,
Inhaltszusammenfassung zur Seite Nr. 10
7. WARRANTY The Russound DPA-1.2 is fully guaranteed for two (2) years from the date of purchase against all defects in materials and workman- ship. During this period Russound will replace any defective parts and correct any defect in workmanship without charge for either parts or labor. For this warranty to apply, the unit must be installed and used according to its written instructions. If service is necessary, it must be performed by Russound. The unit must be returned to Russound at the own
Inhaltszusammenfassung zur Seite Nr. 11
NOTES 11
Inhaltszusammenfassung zur Seite Nr. 12
5 Forbes Rd. Newmarket, NH 03857, USA 603.659.5170 • Fax 603.659.5388 e-mail: tech@russound.com Come visit us at:
