Inhaltszusammenfassung zur Seite Nr. 1
Power bd1500.1
Power bd1000.1
Power bd500.1
mono amplifier
operation & installation
Inhaltszusammenfassung zur Seite Nr. 2
Dear Customer, Congratulations on your purchase of the world's finest brand of car audio amplifiers. At Rockford Fosgate we are fanatics about musical reproduction at its best, and we are pleased you chose our product. Through years of engineering expertise, hand craftsmanship and critical testing procedures, we have created a wide range of products that reproduce music with all the clarity and richness you deserve. For maximum performance we recommend you have your new Rockford Fosgate product
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents Specifications............................................................................................1 Introduction ..............................................................................................3 Amplifier Accessory Pack..........................................................................3 Amplifier Feature Chart ............................................................................4 Design Features ...............................................
Inhaltszusammenfassung zur Seite Nr. 4
Specifications System Model bd500.1 bd1000.1 bd1500.1 Frequency Response: 10-250Hz ± 3dB 10-250Hz ± 3dB 10-250Hz ± 3dB Bandwidth: 10-250Hz ± 3dB 10-250Hz ± 3dB 10-250Hz ± 3dB Input Sensitivity: 125mV to 2.8V 125mV to 2.8V 125mV to 2.8V Protection: Over - current protection Battery under - over voltage protection Thermal protection Battery Fuse: 50 Amperes 100 Amperes 150 Amperes Input Impedance: 20kΩ 20kΩ 20kΩ Number of Channels: Mono Amplifier <1% THD + N RMS Continuous Power: 400W into 4Ω 500W
Inhaltszusammenfassung zur Seite Nr. 5
Introduction In R&D for 3 years, the engineers at Rockford Fosgate unveiled a new tech- nology for car audio applications, Class bd. The principle was shown to the public at the 1999 CES.The bd class amplifier puts over 1000 watts of rms power in the hands of the serious car audio fanatic-- and does so in the relatively small size of the older Power 250.1 package. Conventional Class D amplifiers have been around for 60 years in theory and about 30 years in practice. Judging from market accepta
Inhaltszusammenfassung zur Seite Nr. 6
Power Mono Amplifier Feature Chart POWER AMPLIFIER # of Channels 1 Stable Into: (mono) 2Ω CIRCUITRY Class bd 1 MEHSA - heat dissipating technology 2 TOPAZ - patented noise eliminating circuitry DSM - discrete surface mount MOSFETS - power supply & output devices 3 STARDUST FEATURES Die Cast Heatsink RCA Inputs - for after market radios Pass Thru - feeds signal to aux. amp (eliminates “Y” adapters Pwr/Spk Block Terminals 4 Gauge PWR/GND Variable Punch Bass (0db - + 18db @ 45Hz) (remote) Variable
Inhaltszusammenfassung zur Seite Nr. 7
Design FeatureS 1. Cast Aluminum Heatsink – The cast aluminum heatsink of the Punch amplifier dissipates heat generated by the amplifier's circuitry. The inherent advantage of casting provides a 30% improvement of cooling over conventional extrusion heatsink designs. 2. Speaker Terminals – The heavy duty, gold-plated terminal block con- nectors (+ and –) will accept wire sizes from 8 AWG to 18 AWG. These gold-plated connectors are immune to corrosion that can cause signal deterioration. 3. B+ an
Inhaltszusammenfassung zur Seite Nr. 8
Design Features (Cont’d.) 6. RCA Pass-Thru Jacks – The Pass-Thru provides a convenient source for daisy-chaining an additional amplifier without running an extra set of RCA cables from the front of the vehicle to the rear amplifier location. 7. Gain Control – The input gain control is preset to match the output of most source units. It can be adjusted to match output levels from a variety of source units. 8. Remote Punch Bass - The Punch Bass control helps correct for acousti- cal deficiencie
Inhaltszusammenfassung zur Seite Nr. 9
Installation Considerations This section focuses on some of the vehicle considerations for installing your new Punch amplifier. Checking your battery and present sound sys- tem, as well as pre-planning your system layout and best wiring routes, will save installation time. When deciding how to lay out your new system, be sure that each component will be easily accessible for making adjustments. Before beginning any installation, be sure to follow these simple rules: 1. Be sure to carefully rea
Inhaltszusammenfassung zur Seite Nr. 10
Mounting Location The mounting location and position of your amplifier will have a great effect on its ability to dissipate the heat generated during normal operation. The design of our cast aluminum heatsink serves to easily dissipate the heat generated over a wide range of operating conditions. However, to maxi- mize the performance of your amplifier, care should be taken to ensure ade- quate ventilation. Trunk Mounting Mounting the amplifier vertically on a surface with the fin grooves runnin
Inhaltszusammenfassung zur Seite Nr. 11
Battery and Charging Amplifiers will put an increased load on the vehicle's battery and charging system. We recommend checking your alternator and battery condition to ensure that the electrical system has enough capacity to handle the increased load of your stereo system. Stock electrical systems which are in good condition should be able to handle the extra load of any Rockford amplifier without problems, although battery and alternator life can be reduced slightly. To maximize the performanc
Inhaltszusammenfassung zur Seite Nr. 12
Wiring the System 3. Strip 3/8" from the battery end of the power cable and crimp a large ring terminal to the cable. Use the ring terminal to connect to the battery pos- itive terminal. Do not install the fuse at this time. 4. Prepare a length of cable to be used for the ground connection. Strip 5/8" of insulation from the end of the cable as described above and con- nect to the appropriate terminal of the amplifier. Prepare the chassis ground by scraping any paint from the metal surface and th
Inhaltszusammenfassung zur Seite Nr. 13
Installation Power Connections Mono Mode • RCA inputs are connected to both left and right inputs • Speaker Impedance should be 2Ω minimum 10
Inhaltszusammenfassung zur Seite Nr. 14
Crossover Operation • Variable Crossover can be set from 50Hz and 250Hz Low-Pass (LP) only Punch Bass Operation +24 +24 +18 +18 +12 +12 +6 +6 +3 +3 0dB 0dB • Carefully increase potentiometer to add Punch to your bass frequencies • Exercise caution when increasing Punch Bass. Maximum boost can cause potential woofer damage caused by overexcursion 11
Inhaltszusammenfassung zur Seite Nr. 15
Pass-Thru • Pass-Thru feeds signal to secondary amplifier • Signal from Pass-Thru remains stereo 12
Inhaltszusammenfassung zur Seite Nr. 16
Bridging Mode (use bd sync kit) Ω 13 • Connect the two NEG Speaker outputs together using an eight gauge wire no longer than 15”. • When bridging 2 units together, Unit 1 PHASE must be set at 0, Unit 2 PHASE must be set at 180. • Unit 1 (PHASE set at 0) Connect (+) terminal to (+) Speaker terminal. • Unit 2 (PHASE set at 180) Connect (+) terminal to (-) Speaker terminal. • When bridged do not exceed minimum impedance of 4 .
Inhaltszusammenfassung zur Seite Nr. 17
Troubleshooting If you are having problems after installation follow the Troubleshooting procedures below. Procedure 1: Check Amplifier for proper connections. Verify that POWER light is on. If POWER light is on skip to Step 2, if not continue. 1. Check in-line fuse on battery positive cable. Replace if necessary. 2. Verify that Ground connection is connected to clean metal of the vehicle’s chassis. Repair/replace if necessary. 3. Verify there is 10.5 - 15.5 Volts of current present at the posit
Inhaltszusammenfassung zur Seite Nr. 18
Limited Warranty Information Rockford Corporation offers a limited warranty on Rockford Fosgate products on the following terms: • Length of Warranty 3 years on electronics-90 days on electronic B-stock (receipt required) 1 years on source units 1 year on speakers-90 days on speaker B-stock (receipt required) • What is Covered This warranty applies only to Rockford Fosgate products sold to consumers by Authorized Rockford Fosgate Dealers in the United States of America or its pos- sessions. Prod
Inhaltszusammenfassung zur Seite Nr. 19
International Information ESPAÑOL LEA DETENIDAMENTE LAS SIGUIENTES INSTRUCCIONES DE INSTALA- CION DEL PRODUCTO. EVITARA POSIBLES DAÑOS A VD., AL VEHICU- LO O AL PRODUCTO. INTRODUCCION Los ingenieros de Rockford han diseñado los amplificadores Power para ofrecer en el dificil entorno de un automóvil una calidad de sonido superi- or en un producto flexible, fiable y eficiente. Trans•ana es un circuito de baja tensión en la etapa de preamplificación de los amplificadores Power que permite que la mu
Inhaltszusammenfassung zur Seite Nr. 20
Terminal B+ El cable B+ debe ir provisto de un fusible a una distancia no mayor de 45cm de la bateria. Prepare el cable e instale el portafusibles en el compartimen- to del motor. Las conexiones han de ser impermeables. Terminal GND Prepare un trozo de cable para usarlo como toma de masa. Prepare un punto de masa en el chasis rascando y eliminando la pintura de la superfi- cie de metal y limpielo de toda suciedad asegure el cable al chasis con un tornillo. Terminal REM Conecte el cable REM a un
