Bedienungsanleitung Rockford Fosgate 360.6

Bedienungsanleitung für das Gerät Rockford Fosgate 360.6

Gerät: Rockford Fosgate 360.6
Kategorie: Stereoverstärker
Produzent: Rockford Fosgate
Größe: 2.19 MB
Datum des Hinzufügens: 12/18/2013
Seitenanzahl: 68
Anleitung drucken

Herunterladen

Wie kann man es nutzen?

Unser Ziel ist Ihnen einen schnellen Zugang zu Inhalten in Bedienungsanleitungen zum Gerät Rockford Fosgate 360.6 zu garantieren. Wenn Sie eine Online-Ansicht nutzten, können Sie den Inhaltsverzeichnis schnell durchschauen und direkt zu der Seite gelangen, auf der Sie die Lösung zu Ihrem Problem mit Rockford Fosgate 360.6 finden.

Für Ihre Bequemlichkeit

Wenn das direkte Durchschauen der Anleitung Rockford Fosgate 360.6 auf unserer Seite für Sie unbequem ist, können sie die folgende zwei Möglichkeiten nutzen:

  • Vollbildsuche – Um bequem die Anleitung durchzusuchen (ohne sie auf den Computer herunterzuladen) können Sie den Vollbildsuchmodus nutzen. Um das Durchschauen der Anleitung Rockford Fosgate 360.6 im Vollbildmodus zu starten, nutzen Sie die Schaltfläche Vollbild
  • Auf Computer herunterladen – Sie können die Anleitung Rockford Fosgate 360.6 auch auf Ihren Computer herunterladen und sie in Ihren Sammlungen aufbewahren. Wenn Sie jedoch keinen Platz auf Ihrem Gerät verschwenden möchten, können Sie sie immer auf ManualsBase herunterladen.
Rockford Fosgate 360.6 Handbuch - Online PDF
Advertisement
« Page 1 of 68 »
Advertisement
Druckversion

Viele Personen lesen lieber Dokumente nicht am Bildschirm, sondern in gedruckter Version. Eine Druckoption der Anleitung wurde ebenfalls durchdacht, und Sie können Sie nutzen, indem Sie den Link klicken, der sich oben befindet - Anleitung drucken. Sie müssen nicht die ganze Rockford Fosgate 360.6 Anleitung drucken, sondern nur die Seiten, die Sie brauchen. Schätzen Sie das Papier.

Zusammenfassungen

Unten finden Sie Trailer des Inhalts, der sich auf den nächsten Anleitungsseiten zu Rockford Fosgate 360.6 befindet. Wenn Sie den Seiteninhalt der nächsten Seiten schnell durchschauen möchten, können Sie sie nutzen.

Inhaltszusammenfassungen
Inhaltszusammenfassung zur Seite Nr. 1

360.6
trans• ana
® ®
car audio for
6-Channel Amplifier
Operation & Installation
®
fanatics
punch

Inhaltszusammenfassung zur Seite Nr. 2

Dear Customer, Congratulations on your purchase of the world's finest brand of car audio amplifiers. At Rockford Fosgate we are fanatics about musical reproduction at its best, and we are pleased you chose our product. Through years of engineering expertise, hand craftsman- ship and critical testing procedures, we have created a wide range of products that reproduce music with all the clarity and richness you deserve. For maximum performance we recommend you have your new Rockford Fosgate produc

Inhaltszusammenfassung zur Seite Nr. 3

TABLE OF CONTENTS Introduction ............................................................................................. 1 Punch Amplifier Accessory Pack .............................................................. 1 Technical Design Features ....................................................................... 2 360.6 Design Features.............................................................................. 5 Installation Considerations ...............................................

Inhaltszusammenfassung zur Seite Nr. 4

INTRODUCTION The Punch 360.6, is a 360 watt, 6 channel amplifier with integrated features for accommodating “single amplifier” system designs. Built into the amplifier are four internal XCards and a Signal Switching Network. These features simplify signal processing and enable custom signal distribution for each set of channels. Also integrated is a Phase Switch and Bass EQ circuit designed to improve system tuning. The engineering effort applied to the Punch 360.6 amplifier represents how an im

Inhaltszusammenfassung zur Seite Nr. 5

TECHNICAL DESIGN FEATURES u TRANS•ANA (TRANSconductance Active Nodal Amplifier) The TRANS•ANA (TRANSconductance Active Nodal Amplifier) is a circuit that allows the audio signal to pass through the amplifier at low voltage. The signal is directly level-shifted to the fixed high voltage rails via a pair of driver transistors. Signal linearity is assured by an active node formed by the drive transistors at ultrasonic frequencies. This allows amplifier performance similar to trans•nova which is hig

Inhaltszusammenfassung zur Seite Nr. 6

u DSM (Discrete Surface Mount) Technology The DSM (Discrete Surface Mount) manufacturing process combines the advantages of both discrete components and integrated circuitry. Rockford Fosgate is the only American amplifier manufacturer to have invested millions into this process. DSM components differ from conventional discrete components in different ways. They are more compact, more rugged, and they efficiently dissipate generated heat. Using them wherever appropriate allows the advantages ass

Inhaltszusammenfassung zur Seite Nr. 7

u MOSFET Devices Rockford Fosgate is one of the few manufacturers in the sound community to utilize MOSFET devices in both the power supply and the output stages. MOSFET (Metal Oxide Semiconductor Field Effect Transistor) devices offer several important inherent advantages over the 30 year old technology of bi-polar design. These advantages include: thermal stability, switching speed, ultra low output imped- ance and wider bandwidth linearity. In addition, MOSFETs operate very similarly to vacuu

Inhaltszusammenfassung zur Seite Nr. 8

360.6 DESIGN FEATURES 1. Cast Aluminum Heatsink – The cast aluminum heatsink of the Punch amplifier dissipates heat generated by the amplifier's circuitry. The inherent advantage of casting provides a 30% improvement of cooling over conventional extrusion heatsink designs. 2. End Caps – The unique end caps conceal the wiring and input cables, giving the amplifier a clean “stealth” look. R R R LED + L – + R – Ch. C Ch. C Ch. B Ch. A L L L Gain Gain Ch. C Bass EQ Gain Ch. C Ch. C Ch. B Ch. A 12 3

Inhaltszusammenfassung zur Seite Nr. 9

8. Input Sensitivity Controls – The input level controls are preset to match the output of most source units. They can be adjusted to match output levels from a variety of source units. 9. Bass EQ Control – The Bass EQ allows a narrow band adjustment of up to +18dB centered at 45Hz. The bass boost can be bypassed by turning the control to its minimum or counterclock- wise position. The Bass EQ is dedicated for “Channel C” only. 10. Internal Crossovers – These built-in crossover cards are con

Inhaltszusammenfassung zur Seite Nr. 10

INSTALLATION CONSIDERATIONS The following is a list of tools you will need for installing the Punch amplifier: Allen wrenches 9/64" & 3/32" (included) Voltmeter Wire strippers Battery post wrench Electric hand drill w/assorted bits Wire cutters Wire crimpers Assorted connectors This section focuses on some of the vehicle considerations for installing your new Punch amplifier. Checking your battery and present sound system, as well as pre-planning your system layout and best wiring routes will s

Inhaltszusammenfassung zur Seite Nr. 11

MOUNTING LOCATION The mounting location and position of your amplifier will have a great effect on its ability to dissipate the heat generated during normal operation. The design of our cast aluminum heatsink serves to easily dissipate the heat generated over a wide range of operating condi- tions. However, to maximize the performance of your amplifier, care should be taken to ensure adequate ventilation. Trunk Mounting Mounting the amplifier vertically on a surface with the fin grooves running

Inhaltszusammenfassung zur Seite Nr. 12

> > > BATTERY AND CHARGING Amplifiers will put an increased load on the vehicle's battery and charging system. We recommend checking your alternator and battery condition to ensure that the electrical system has enough capacity to handle the increased load of your stereo system. Stock electrical systems which are in good condition should be able to handle the extra load of any Rockford amplifier without problems, although battery and alternator life can be reduced slightly. To maximize the perfo

Inhaltszusammenfassung zur Seite Nr. 13

Mount the fuseholder within 18" of the battery using two (2) #8 screws. Disassemble the fuseholder. You should have 2 black plastic end caps, 2 gold-plated fuse clips, a plastic spacer and the fuseholder body. Trim the amplifier power cable to reach the fuseholder and strip the wire 3/8". Slide one of the end caps over the wire (narrow end first) and insert the wire into one of the fuse clips. Tighten the set screw. Screw the black end cap to the fuseholder body to secure the cable. Use the sect

Inhaltszusammenfassung zur Seite Nr. 14

8. Connect the source signal to the amplifier by plugging the RCA cables into the input jacks at the amplifier. 9. Connect the speakers. Strip the speaker wires 5/8". Insert the bared wire into the speaker terminal and tighten the set screw to secure into place. Be sure to maintain proper speaker polarity. DO NOT chassis ground any of the speaker leads as unstable operation may result. 10. Perform a final check of the completed system wiring to ensure that all connections are accurate. Check a

Inhaltszusammenfassung zur Seite Nr. 15

USING THE XCARD The crossover functions are controlled through the use of an XCard and can be set for high-pass, low-pass or full range operation. The XCard installed in your amplifier is set for Full Range. Each crossover card has two faces: one face operates Full Range, the other has arrows to indicate the edge for selecting HP (high-pass) or LP (low-pass) operation. Orient the card with the desired operating edge, indicated by the arrow, toward the socket terminals inside the amplifier. Firml

Inhaltszusammenfassung zur Seite Nr. 16

RESISTOR CHART Our tests have shown that using 0.047μf capacitors for frequencies below 100Hz, and 0.022μf capacitors for frequencies above 100Hz, result in more linear crossover control. Refer to the Specifications page to determine the capacitor value of each supplied XCard. Butterworth Alignment Q = .707 Butterworth Alignment Q = .707 1% resistors used with 0.047μF caps 1% resistors used with 0.022μF caps Frequency R1 R2 Frequency R1 R2 20Hz 169kΩ 169kΩ 20Hz 357kΩ 357kΩ 25Hz 133kΩ 133kΩ 25H

Inhaltszusammenfassung zur Seite Nr. 17

XCARD CONFIGURATIONS Configure a 12dB/octave filter for Channel A – L + – R + REM Dual B+ Dual GND + L – + R – Ch. B Ch. B Ch. A Ch. A 80Hz-20kHz 80Hz-20kHz 12dB/octave HP 12dB/octave HP XCard C XCard B XCard B XCard A XCard A HP • XCard A set to High-Pass or Low-Pass Configure a 12dB/octave filter for Channel B – L + – R + REM Dual B+ Dual GND + L – + R – Ch. B Ch. B Ch. A Ch. A 20Hz-80Hz 20Hz-80Hz 12dB/octave LP 12dB/octave LP XCard B2 Full Range XCard C XCard B XCard B XCard A XCard B1 LP • X

Inhaltszusammenfassung zur Seite Nr. 18

Configure a 24dB/octave filter for Channel B – L + – R + REM Dual B+ Dual GND + L – + R – Ch. B Ch. B Ch. A Ch. A 20Hz-80Hz 20Hz-80Hz 24dB/octave LP 24dB/octave LP XCard B2 LP XCard C XCard B * XCard B XCard A XCard B1 LP • XCard B1 & B2 set identically to High-Pass or Low-Pass *Note: Both XCards must be customized to the same frequency for proper 24dB/octave operation. Refer to “Using the XCard” on page 12 for altering the cutoff frequency. Configure a 12dB/octave Bandpass filter for Channel B

Inhaltszusammenfassung zur Seite Nr. 19

Configure a 12dB/octave Low-Pass filter for Channel C R R R LED + L – Ch. B Ch. A + R – Ch. C Ch. C L L L Bass EQ Gain Gain Gain Ch. C Ch. C Ch. C Ch. B Ch. A 20Hz-80Hz 12dB/octave LP XCard C LP XCard C XCard B XCard B XCard A • XCard C set to High-Pass or Low-Pass USING THE PHASE SWITCH Vehicle interiors can cause acoustical irregularities with the system's bass response. The Punch amplifier has a 0°/–180° phase switch that allows both Channel C outputs to be inverted simultaneously. Since woof

Inhaltszusammenfassung zur Seite Nr. 20

USING THE SIGNAL SWITCHING NETWORK The Signal Switching Network allows the RCA input signals to be distributed to the outputs in many different configurations. The orientation of both switches configure the distribution pattern. The switches can be oriented in the following configurations: Configuration #1 Ch. A inputs => Ch. A outputs Ch. B inputs => Ch. B outputs XCard C –180° Ch. A & B inputs summed => Ch. C outputs 0° XCard B XCard B XCard A Configuration #2 Ch. A inputs => Ch. A


Ähnliche Anleitungen
# Bedienungsanleitung Kategorie Herunterladen
1 Rockford Fosgate 1000 Handbuch Stereoverstärker 49
2 Rockford Fosgate 125.2 Handbuch Stereoverstärker 20
3 Rockford Fosgate 150S Handbuch Stereoverstärker 19
4 Rockford Fosgate 200ix Handbuch Stereoverstärker 19
5 Rockford Fosgate 100ix Handbuch Stereoverstärker 7
6 Rockford Fosgate 100X2 Handbuch Stereoverstärker 14
7 Rockford Fosgate 150 Handbuch Stereoverstärker 26
8 Rockford Fosgate 160X4 Handbuch Stereoverstärker 18
9 Rockford Fosgate 250, 360, 400, 500, 600, 800, 1000 Handbuch Stereoverstärker 91
10 Rockford Fosgate 200X2 Handbuch Stereoverstärker 21
11 Rockford Fosgate 200S Handbuch Stereoverstärker 1
12 Rockford Fosgate 250 Handbuch Stereoverstärker 8
13 Rockford Fosgate 225.2 Handbuch Stereoverstärker 15
14 Rockford Fosgate 240X4 Handbuch Stereoverstärker 26
15 Rockford Fosgate 250.2 Handbuch Stereoverstärker 15
16 Sony SA-VE312 Handbuch Stereoverstärker 9
17 Sony MONAURAL Handbuch Stereoverstärker 1
18 Sony 4-151-113-11 (1) Handbuch Stereoverstärker 0
19 Sony 645-139 Handbuch Stereoverstärker 3
20 Sony XM-1252GTR Handbuch Stereoverstärker 35