Inhaltszusammenfassung zur Seite Nr. 1
DISCRETE SEMICONDUCTORS
DATA SHEET
handbook, halfpage
M3D167
BGY1916
UHF amplifier module
Product specification 2000 Oct 17
Supersedes data of 1998 May 27
Inhaltszusammenfassung zur Seite Nr. 2
Philips Semiconductors Product specification UHF amplifier module BGY1916 FEATURES PINNING - SOT365A • 26 V nominal supply voltage PIN DESCRIPTION • 16 W output power into a load of 50 Ω with an RF drive 1 RF input power of ≤63 mW. 2V S1 3V S2 APPLICATIONS 4 RF output • Base station transmitting equipment operating in the Flange ground 1930 to 1990 MHz frequency band. DESCRIPTION handbook, halfpage The BGY1916 is a three-stage UHF amplifier module in a SOT365A package with a plastic cap. It consis
Inhaltszusammenfassung zur Seite Nr. 3
Philips Semiconductors Product specification UHF amplifier module BGY1916 CHARACTERISTICS T =25 °C; V =5V; V = 26 V; P = 16 W; Z =Z =50 Ω unless otherwise specified. mb S1 S2 L S L SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT f frequency 1930 - 1990 MHz I supply current - 80 - mA S1 I supply current P < - 60 dBm - 430 - mA S2 D P load power P <63mW 16 -- W L D G power gain 24 - 28 dB p η efficiency 30 -- % H second harmonic --- 35 dBc 2 H third harmonic --- 45 dBc 3 VSWR input VSWR -- 1.6:1 in st
Inhaltszusammenfassung zur Seite Nr. 4
Philips Semiconductors Product specification UHF amplifier module BGY1916 APPLICATION INFORMATION handbook, full pagewidth C7 C8 C5 C6 Z R1 L1 R2 L2 Z 1 2 C3 C4 C1 C2 50 Ω V V 50 Ω S1 S2 input output MGM861 Fig.4 Test circuit. List of components (see Figs 4 and 5) COMPONENT DESCRIPTION VALUE CATALOGUE NO. C1, C2 electrolytic capacitor 10 μF; 35 V C3, C4 multilayer ceramic chip capacitor 10 nF; 50 V C5, C6 multilayer ceramic chip capacitor 100 pF; 50 V C7, C8 multilayer ceramic chip capacitor 10 p
Inhaltszusammenfassung zur Seite Nr. 5
Philips Semiconductors Product specification UHF amplifier module BGY1916 handbook, full pagewidth 90 42 C7 C8 C5 C6 R1 L1 L2 R2 C3 C4 Z Z 2 1 C1 C2 MGM862 output V V input S1 S2 Dimensions in mm. Fig.5 Printed-circuit board component layout. 2000 Oct 17 5
Inhaltszusammenfassung zur Seite Nr. 6
Philips Semiconductors Product specification UHF amplifier module BGY1916 MOUNTING RECOMMENDATIONS The module should be mounted to the heatsink using 3 mm bolts with flat washers. The bolts should first be To ensure a good thermal contact and to prevent tightened to “finger tight” and then further tightened in mechanical stress when bolted down, the flatness of the alternating steps to a maximum torque of 0.4 to 0.6 Nm. mounting base is designed to be typically better than 0.1 mm. The mounting are
Inhaltszusammenfassung zur Seite Nr. 7
Philips Semiconductors Product specification UHF amplifier module BGY1916 PACKAGE OUTLINE Plastic rectangular single-ended flat package; flange mounted; 2 mounting holes; 4 in-line leads SOT365A D A F y U q A U 2 p U E 1 L 1234 b w M v c A p e e e Z Q 1 0 10 20 mm scale DIMENSIONS (mm are the original dimensions) UNIT A b c D E e e Fp L Qq U U U vw y Z p 1 1 2 9.5 0.56 4.0 0.3 30.1 18.6 3.25 6.5 4.1 40.74 48.0 15.4 7.75 12.8 mm 2.54 17.78 0.3 0.25 0.1 9.0 0.46 0.2 29.9 18.4 3.15 6.1 3.9 3.8 40.54
Inhaltszusammenfassung zur Seite Nr. 8
Philips Semiconductors Product specification UHF amplifier module BGY1916 DATA SHEET STATUS PRODUCT (1) DATA SHEET STATUS DEFINITIONS STATUS Objective specification Development This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. Preliminary specification Qualification This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right t
Inhaltszusammenfassung zur Seite Nr. 9
Philips Semiconductors Product specification UHF amplifier module BGY1916 NOTES 2000 Oct 17 9
Inhaltszusammenfassung zur Seite Nr. 10
Philips Semiconductors Product specification UHF amplifier module BGY1916 NOTES 2000 Oct 17 10
Inhaltszusammenfassung zur Seite Nr. 11
Philips Semiconductors Product specification UHF amplifier module BGY1916 NOTES 2000 Oct 17 11
Inhaltszusammenfassung zur Seite Nr. 12
Philips Semiconductors – a worldwide company Argentina: see South America Netherlands: Postbus 90050, 5600 PB EINDHOVEN, Bldg. VB, Tel. +31 40 27 82785, Fax. +31 40 27 88399 Australia: 3 Figtree Drive, HOMEBUSH, NSW 2140, Tel. +61 2 9704 8141, Fax. +61 2 9704 8139 New Zealand: 2 Wagener Place, C.P.O. Box 1041, AUCKLAND, Tel. +64 9 849 4160, Fax. +64 9 849 7811 Austria: Computerstr. 6, A-1101 WIEN, P.O. Box 213, Tel. +43 1 60 101 1248, Fax. +43 1 60 101 1210 Norway: Box 1, Manglerud 0612, OSLO, T
