Inhaltszusammenfassung zur Seite Nr. 1
Model 7700 7-Channel Power Amplifier
Model 7500 5-Channel Power Amplifier
Owner’s Manual
Version 1.0
Inhaltszusammenfassung zur Seite Nr. 2
Owner’s Manual Please Read First Installation Location Please Read First To assure proper operation and to avoid the potential for safety hazards, place the unit on a firm and level surface capable of supporting 100 pounds or more. When placing the amplifier on a shelf, be certain that the shelf and any mounting hardware can support the weight of the amplifier and any additional items in the equipment rack, or on the shelf. When positioning the amplifier in its final location, make certain th
Inhaltszusammenfassung zur Seite Nr. 3
Owner’s Manual Model 7700/7500 Multi-Channel Power Amplifier Table of Contents Model 7700/Model 7500 Please Read First Table of Contents Multi-Channel Power Amplifier Features Congratulations! As the owner of an Outlaw Audio Multi-Channel Power Ampli- Unpacking fier, you are in possession of a unique product. Designed and manufactured 4 Rear Panel in the United States, it has been carefully designed to deliver the best possible sonic performance. This manual covers both the Model 770
Inhaltszusammenfassung zur Seite Nr. 4
Owner’s Manual Rear Panel Rear Panel A B C D E F G H Note: Items in gray shaded area are found on Model 7700 amplifier only. A Unbalanced Audio Inputs E Product Serial Number Use the Unbalanced INPUT jacks to connect the RCA outputs of a surround Write this number in the space provided on page 2 for future reference. processor, preamplifier, AV receiver with RCA preout connections, DVD F Speaker Outputs player with discrete five channel outputs, or HDTV product with built-in Use the OUTPUT
Inhaltszusammenfassung zur Seite Nr. 5
Owner’s Manual Connecting Your Amplifier strands of each conductor together. Be careful not to cut the individual strands Connecting Your Amplifier or twist them off. For optimal performance, all strands must be used. When making connections between any source components and the ampli- Correct polarity connections are important to maintain proper speaker phasing. fier, or when making connections to any speaker, be certain that both the When speaker phasing is correct, all speakers move in and
Inhaltszusammenfassung zur Seite Nr. 6
Owner’s Manual Model 7700 Rear Panel Connections Model 7700 Rear Panel Connections 6 Outlaw Audio
Inhaltszusammenfassung zur Seite Nr. 7
Owner’s Manual Model 7500 Rear Panel Connections Model 7500 Rear Panel Connections 7 Model 7700/7500 Multi-Channel Power Amplifier
Inhaltszusammenfassung zur Seite Nr. 8
Owner’s Manual Amplifier Operation Power Control Connections Amplifier Operation Your Outlaw amplifier features a built-in remote turn-on system that will After all connections have been made you are ready for listening. First, turn on automatically switch the amplifier when another device in the system is the source components and processor in your system. It is always a good idea switched on. to turn on your amplifier LAST. This avoids the possibility of any turn on pops or transients fro
Inhaltszusammenfassung zur Seite Nr. 9
Owner’s Manual Troubleshooting Troubleshooting Guide Problem Solutions Amplifier will not turn on Master Power Switch turned off (No power light LED) Turn on Master Power Switch Amplifier will not turn on Remote trigger cable not properly connected Verify connection of trigger cable at both ends Amplifier turns on, but no audio from one or more channels Input plugs not connected to proper jack or are loose Check input connections Confirm that the Unbalanced/Balanced switch is in the correc
Inhaltszusammenfassung zur Seite Nr. 10
Owner’s Manual A Few Words About Hum and Noise cal and expensive. In some cases, the use of an approved AC Power Isolation Potential Ground Loops in a Complex A/V System Transformer of sufficient capacity may solve this problem. Suggestion #1: To determine if a cable TV connection is responsible for the hum, first turn all Warning: if you suspect that the grounding system in your home’s components off. Disconnect the cable TV feed to your system at the first place electrical wiring is causin
Inhaltszusammenfassung zur Seite Nr. 11
Owner’s Manual Specifications Specifications Model 7500 Model 7700 Power Output 5 x 200 watts @ 8 ohms, FTC: 20 - 20kHz, 0.03% THD, 7 x 200 watts @ 8 ohms, FTC: 20 - 20kHz, 0.03% THD, All Channels Driven, 5 x 300 watts @ 4 ohms, All Channels Driven, 7 x 300 watts @ 4 ohms, FTC: 20 - 20kHz, 0.03% THD, All Channels Driven FTC: 20 - 20kHz, 0.03% THD, All Channels Driven Frequency Response 20Hz -20kHz +/- 0.1dB at rated output 20Hz -20kHz +/- 0.1dB at rated output Total Harmonic Distortion (
Inhaltszusammenfassung zur Seite Nr. 12
Owner’s Manual Outlaw Audio Limited Warranty The Outlaw Audio 0-Day Satisfaction Guarantee This product is guaranteed to satisfy all your needs for a high performance If you decide to return the amplifier, the only cost you will be responsible for power amplifier. If for any reason, you are not completely satisfied with it, is the shipping charge to return it to us. When your amplifier arrives, we will please contact us at 866-OUTLAWS (688-5297) within 30 days of receipt of inspect it to ins
