Inhaltszusammenfassung zur Seite Nr. 1
INSTALLATION & OPERATION GUIDE
®
Systems Integration Amplifier
®
®
B LENDING H IGH F IDELITY AND A RCHITECTURE
Inhaltszusammenfassung zur Seite Nr. 2
DS00219CMY-SI-275.qxp 6/7/05 3:18 PM Page 1 CONGRATULATIONS! Thank you for purchasing the Niles SI-275, one of the most flexible and conve- nient amplifiers ever offered. Like all Niles products, the SI-275 is built to the highest standards of quality control and reliability. With proper installation and operation, you'll enjoy years of trouble-free use. Niles manufactures the industry's most complete line of custom installation compo- nents and accessories for audio/video systems. For a free
Inhaltszusammenfassung zur Seite Nr. 3
INTRODUCTION DS00219CMY-SI-275.qxp 6/7/05 3:18 PM Page 2 INTRODUCTION The SI-275 is a member of the award-winning Niles Systems Integration Amplifier family. It is designed for home theaters and whole house audio systems requiring high power. Niles specifically created Systems Integration Amplifiers to solve the problems of interfacing with different brands and models of equipment, different acoustic environments in different rooms, and different kinds of applications; home theater, stereo, a
Inhaltszusammenfassung zur Seite Nr. 4
FEATURES AND BENEFITS DS00219CMY-SI-275.qxp 6/7/05 3:18 PM Page 3 FEATURES AND BENEFITS Real World Power The SI-275 delivers 75 watts per channel at 8 Ohms and 100 watts per channel at 4 Ohms. You’ll get tremendous bass and dynamics from every pair of speakers powered by an SI-275. Transparent Sound The audio circuitry of the SI-275 is constructed using the finest parts available; including 1% metal film resistors, high quality capacitors, and oversized heat sinks. All this attention to te
Inhaltszusammenfassung zur Seite Nr. 5
FEATURES AND BENEFITS DS00219CMY-SI-275.qxp 6/7/05 3:18 PM Page 4 Turn-On Modes The SI-275 features three turn-on modes: 1. Music Sense, 2. External Voltage Trigger, 3. Manual Turn-On via the front panel switch. You can configure the SI-275 to interface with any kind of system and have the unit automatically turn on. Automatic Protection The SI-275 is equipped with sophisticated protection circuits. In the unlikely event that a problem occurs, the amplifier shuts itself off. When conditions
Inhaltszusammenfassung zur Seite Nr. 6
INSTALLATION CONSIDERATIONS DS00219CMY-SI-275.qxp 6/7/05 3:18 PM Page 5 INSTALLATION CONSIDERATIONS Placement Place the SI-275 on a flat level surface like a table or shelf. It should be placed upright so that its weight rests on the four attached feet. Placing the weight of the amplifier on the rear or front panel for even an instant will result in damage to the amplifier's connectors and controls. The SI-275, like any hi-fi component, will last much longer if it is given adequate ventilatio
Inhaltszusammenfassung zur Seite Nr. 7
INSTALLATION CONSIDERATIONS DS00219CMY-SI-275.qxp 6/7/05 3:18 PM Page 6 Turn-On Modes The SI-275 draws more current than a preamplifier’s switched AC outlet can safe- ly supply. Also, your preamplifier may “thump” at dangerous volumes if the amplifier is already on when the preamp turns on. It is usually best to turn the amplifier on only when it is needed. The Turn-On Mode selector switch gives you three options for turning the SI-275 on and off. Constant - The auto turn-on circuitry is off.
Inhaltszusammenfassung zur Seite Nr. 8
INSTALLATION CONSIDERATIONS DS00219CMY-SI-275.qxp 6/7/05 3:18 PM Page 7 Multiple Speaker Loads The SI-275 is stable into very low impedance loads. This means you can safely operate three pairs of 8 ohm speakers (a 2.67 ohm load) directly connected to the SI-275. Note that the SI-275 does not have on/off speaker switching built in. When the amplifier is on, so are all of the speakers. (for more information on proper amplifier placement, see Installation Considerations on page 5, Figure 2). Nil
Inhaltszusammenfassung zur Seite Nr. 9
INSTALLATION CONSIDERATIONS DS00219CMY-SI-275.qxp 6/7/05 3:18 PM Page 8 Cable and Wire It will be easier to reconfigure or troubleshoot your system in the future if you label the cables and wires for their destination or source, rather than which ter- minal of the SI-275 they are connected to. The SI-275 connects to your sources via shielded line level audio cables with RCA phono plugs. Use high quality cables with your Niles amplifier for the low- est possible noise and best overall performa
Inhaltszusammenfassung zur Seite Nr. 10
FRONT AND REAR PANEL DETAILS DS00219CMY-SI-275.qxp 6/7/05 3:18 PM Page 9 Red “Power” LED confirms the amplifier is Green “Active” LED lights when the connected to a live AC power outlet. (and amplifier circuitry has been turned on by that the master power switch is on). the Turn-On circuits. Front panel “Master Power” switch turns The red “Protect” LED indicates the amp has shut off the entire amplifier, including the down because there is a fault in the speaker, the Turn-On circuitry. wiring
Inhaltszusammenfassung zur Seite Nr. 11
FRONT AND REAR PANEL DETAILS DS00219CMY-SI-275.qxp 6/7/05 3:18 PM Page 10 ut Level Adjustment screws enable you to preset a e the maximum system volume (or match levels with another amplifier). NOTE: AC receptacle must be easily accessible. IEC receptacle for AC Binding posts for speaker connections. power cord. 10
Inhaltszusammenfassung zur Seite Nr. 12
INSTALLATION DS00219CMY-SI-275.qxp 6/7/05 3:18 PM Page 11 INSTALLATION Page 11 Setting The Turn-On Mode Page 12 Line Level Audio Inputs Switch Page 13 Cascade Audio Outputs Page 11 Control Output Page 14 AC Power plug Page 12 Speaker Wire Connections Setting the Turn-On Mode Switch The SI-275 has three turn-on modes. Select which mode you desire by sliding the mode switch. See Installation Considerations on page 6 for more information about each of the turn-on modes. Slide the switch with yo
Inhaltszusammenfassung zur Seite Nr. 13
INSTALLATION DS00219CMY-SI-275.qxp 6/7/05 3:18 PM Page 12 Speaker Wire Connections CAUTION! All speaker wire connections must be made with the amplifier Off. Bare Wire Banana Plugs Unscrew the red or There are many types black plastic knob, of banana plugs, some insert the bare wire crimp, some solder. end into the opening, The Niles gold banana and then tighten the plug has a quick-con- knob until the wire is nect binding post for securely clamped. the bare wire on the body of the plug. A
Inhaltszusammenfassung zur Seite Nr. 14
INSTALLATION DS00219CMY-SI-275.qxp 6/7/05 3:18 PM Page 13 Line Level Audio Input CAUTION! THE AMPLIFIER MUST BE OFF WHENEVER YOU MAKE CHANGES TO THE INPUT CONNECTIONS. STEP DESCRIPTION 1. Label all of the interconnecting Use audio patch cables with RCA phono cables for the sources they connect to. plugs attached to the ends. 2. Connect the sources by inserting the Connect outputs from your sources to RCA plugs into the amplifier’s jacks. inputs on the amplifier. Never connect a source or pr
Inhaltszusammenfassung zur Seite Nr. 15
INSTALLATION DS00219CMY-SI-275.qxp 6/7/05 3:18 PM Page 14 AC Power Plug STEP DESCRIPTION Plug the female IEC socket of the sup- Just like a computer or printer, the SI-275 plied AC cord into the IEC receptacle has an AC cord which unplugs either at the on the rear of the amplifier. amp or at the wall for your convenience. If you use a grounded power strip, surge Plug the 2 prong plug into a correctly suppressor or extension cord, verify that grounded 120V 60 Hz wall outlet. proper ground is m
Inhaltszusammenfassung zur Seite Nr. 16
OPERATION DS00219CMY-SI-275.qxp 6/7/05 3:18 PM Page 15 OPERATION Power Switch The front panel switch is a master or “vacation” power switch. No matter which turn-on mode you have selected, the master power switch will turn off all cir- cuitry—including the sensing circuitry. If you will not be using the amplifier for an extended period of time, turn the master power switch “Off” (push button switch out). When you would like to return to normal operation, turn the switch “On” (push button swit
Inhaltszusammenfassung zur Seite Nr. 17
TROUBLESHOOTING GUIDE DS00219CMY-SI-275.qxp 6/7/05 3:18 PM Page 16 TROUBLESHOOTING GUIDE When there is a problem consult this guide first. If the problem persists, or you have additional questions, call your local Niles dealer or Niles Technical Support at 1-800-289-4434. The most common problems relate to hook up. Call from your telephone extension nearest the system. POSSIBLE CAUSES AND TEST PROCEDURE SYMPTOM Short circuit or loose wire at the speaker or amplifi- No sound on one channel er
Inhaltszusammenfassung zur Seite Nr. 18
TROUBLESHOOTING GUIDE DS00219CMY-SI-275.qxp 6/7/05 3:18 PM Page 17 TROUBLESHOOTING GUIDE (continued) SYMPTOM POSSIBLE CAUSES AND TEST PROCEDURE Hum from the speakers Check for faulty cables, faulty source material, an ungrounded phono system or a defective component. AC power cord must be plugged into a working outlet. Amp will not turn on Master power switch must be on. Bass sound is weak and The loudspeakers are wired out of phase. Reverse the stereo image is the connections at the back of
Inhaltszusammenfassung zur Seite Nr. 19
SPECIFICATIONS DS00219CMY-SI-275.qxp 6/7/05 3:18 PM Page 18 SPECIFICATIONS Design Principle Linear voltage/current amplification. Continuous Average Power Output 75 watts per channel RMS at 8 ohms. 100 watts per channel RMS at 4 ohms. Input Impedance Approximately 15K ohms Input Sensitivity .985V for 8Ω rated output Overall Voltage Gain 30 dB Frequency Response Bandwidth Limited from 10 Hz to 100 kHz Total Harmonic Distortion 8 Ohms .05% THD from 20 Hz to 20 kHz @ full rated power 4 Ohms .06%
Inhaltszusammenfassung zur Seite Nr. 20
DS00219CMY-SI-275.qxp 6/7/05 3:18 PM Page 19 Niles Audio Corporation www.nilesaudio.com 12331 S.W. 130 Street Miami, Florida 33186 ©2005 Niles Audio Corporation. All rights reserved. Niles, the Niles logos, Systems Tel: (305) 238-4373 Integration Amplifier and Blending High Fidelity and Architecture are registered trade- marks of Niles Audio Corporation. All other trademarks are the property of their Fax: (305) 238-0185 respective owners. Printed in Malaysia 03/05 DS00219CMY
