Bedienungsanleitung Nady Systems GTA-1260

Inhaltszusammenfassung zur Seite Nr. 1

OWNER’S MANUAL
GTA-1260
Classic Tube AMP with Reverb
GUITAR AMPLIFIER

Inhaltszusammenfassung zur Seite Nr. 2

GTA-1260 Classic Tube AMP with Reverb Congratulations on your choice of guitar amplifier — you have purchased one of the finest guitar amplifiers on the market today. This unit was developed using the expertise of professional sound engineers and working musicians. You will find that your new NADY AUDIO GTA-1260 has superior performance and greater flexibility than any other guitar amplifiers in its price range. Please read this manual carefully to get the most out of your new unit. Thanks for

Inhaltszusammenfassung zur Seite Nr. 3

WARNING An equilateral triangle enclosing a lightening flash/arrowhead symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure which may be of sufficient magnitude to constitute a risk of electric shock. ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR An equilateral triangle enclosing an exclamation point is intended to alert the user to the presence of important operating and service instructions in the literature enclosed

Inhaltszusammenfassung zur Seite Nr. 4

INSTALLATION To ensure years of enjoyment from your NADY AUDIO GTA-1260, please read and understand this manual thoroughly before using the unit. INSPECTION Your NADY AUDIO GTA-1260 was carefully packed at the factory in packaging designed to protect the units in shipment. Before installing and using your unit, carefully examine the packaging and all contents for any signs of physical damage that may have occurred in transit. [Please note: Nady Systems is not responsible for shipping damage. If

Inhaltszusammenfassung zur Seite Nr. 5

FRONT CONTROLS AND CONNECTIONS (6) (10) (11) (12) (4) (5) (7) (8) (9) (3) (2) (1) 1. POWER SWITCH This switch turns the main power on and off. Flipping the • For maximum distortion adjust the VOLUME to toggle switch up to the ON+ position will turn on the amp maximum, the MASTER to a very low setting, and “in phase” with the main AC line voltage. Flipping the the DISTORTION to Position 3. switch down to the ON- position will reverse the polarity. In some cases, AC hum (caused by ground loops)

Inhaltszusammenfassung zur Seite Nr. 6

REAR CONTROLS AND CONNECTIONS (2) (3) (4) (6) (1) (5) 1. POWER CONNECTION 4. SPEAKER JACK A standard IEC AC power socket for connecting to the This jack is connected to the internal speaker using a “L” main AC supply. The IEC power socket has an integral shaped plug and speaker cable. The internal speaker can fuse holder that takes a 20mm fuse. be disconnected if you wish to only use external speakers. NOTE: 5. EXTERNAL SPEAKER • Always replace a blown fuse with the same type as Jack for con

Inhaltszusammenfassung zur Seite Nr. 7

SPECIFICATIONS Power Amp Section ..............................................................................................................................Tubes: 2 ea 6L6GC Power Output........................................................................................60 Watts @ 8Ω 5% THD; 40 Watts @ 4Ω 5% THD Speaker ....................................................................................................Nady PowerDrive™ PD-12i by Celestion, 12” 8Ω Preamp Section.............

Inhaltszusammenfassung zur Seite Nr. 8

SERVICE FOR YOUR NADY AUDIO PRODUCT (U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-2411, or e-mail at service@nady.com. (International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased this product. DO NOT ATTEMPT TO SERVICE THIS UNIT YOURSELF AS IT CAN BE DANGEROUS AND WILL ALSO VOID THE WARRANTY. NADY SYSTEMS, INC. • 6701 SHELLMOUND STREET, EMERYVILLE,