Inhaltszusammenfassung zur Seite Nr. 1
LINN KLOUT
OWNERS MANUAL
Inhaltszusammenfassung zur Seite Nr. 2
Year 2000 Compliance Linn has used all reasonable endeavours to ensure that the software in the products manufactured by it is capable of normal operation before, during and after 1 January 2000 and in respect of past, present and future dates without replacement, alteration or upgrade (“Year 2000 Compliant”). Linn, however, gives no express warranties, representations or undertakings and to the maximum extent permitted hereby excludes any terms, warranties, representations or undertakings im
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT SAFETY INFORMATION Explanation of symbols used in this manual and on the product: This symbol is intended to alert the user to the presence of uninsulated dangerous voltages within the enclosure of sufficient magnitude to cause electric shock. This symbol is intended to alert the user to the presence of importance maintenance and servicing information in the instruction and service manuals. CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE THE COVER. NO USER SERVICEABLE PART
Inhaltszusammenfassung zur Seite Nr. 4
MAINS PLUGS This appliance is supplied with a non-rewireable mains plug for the intended country. Replacement mains leads can be obtained from your Linn retailer. Should you need to change the plug please dispose of it carefully. A plug with bared conductors is dangerous if engaged in a live socket. The Brown wire must be connected to the Live (Line) supply pin. The Blue wire must be connected to the Neutral supply pin. The Green/Yellow wire must be connected to the Earth (Ground) supply pin. Pl
Inhaltszusammenfassung zur Seite Nr. 5
11. Grounding or Polarization. Do not defeat the precautions taken to ground or polarize the supply to the appliance. 12. Power Cord Protection. Route power cords so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, power sockets and at the point where they exit from the appliance. 13. Protective Attachment Plug. As a safety feature the product is equipped with an attachment plug containing overload protecti
Inhaltszusammenfassung zur Seite Nr. 6
UK USERS PLEASE READ THIS IMPORTANT SAFETY INFORMATION. FUSE REPLACEMENT This appliance is fitted with a non-rewireable 13 Amp mains plug. The plug contains a 5 Amp fuse. If the fuse has blown it can be replaced: a) pull out the red fuse cover/carrier. b) remove and dispose of the blown fuse. c) fit a new 5 Amp BS1362 approved fuse into the carrier and push the carrier back into the plug. Always ensure the fuse cover is fitted. If the fuse cover is missing do not use the plug. Contact your Linn
Inhaltszusammenfassung zur Seite Nr. 7
USIC is very important for people. It stimulates the imagination, helps them relax, can change their mood, and of course provides Mentertainment and pleasure. A good hi-fi works well enough to deliver these benefits. It also helps you appreciate music you never thought you would. At Linn we devote our energy to improving standards of music reproduction, because we know that the better the sound the more you'll enjoy music at home. The addition of any Linn component will improve the sound qua
Inhaltszusammenfassung zur Seite Nr. 8
2
Inhaltszusammenfassung zur Seite Nr. 9
NTRODUCTION The Linn KLOUT power amplifier has many unique attributes which set new standards in both mechanical and electronic Iengineering. The KLOUT is designed to partner the Linn KAIRN pre- amplifier, from which it can be operated directly. The KLOUT is housed in a one-piece, solid extrusion, engineered to maximise strength and heat dissipation. Three pairs of speaker outlets per channel allow easy bi-wiring or tri-wiring. A screened transformer enables the KLOUT to be positioned close
Inhaltszusammenfassung zur Seite Nr. 10
INSTALLATION Unpack the KLOUT and retain the packing for future transportation. CAUTIONTake care when handling the KLOUT. It weighs 11kg and should be lifted carefully to avoid damage to yourself and the product. Do not stack a KLOUT with other products which will obstruct the airflow, or which cannot support the weight. WARNING Never attempt any home maintenance. Large capacitors, containing LETHAL voltages, remain charged for a considerable time after the KLOUT is switched off and disconnect
Inhaltszusammenfassung zur Seite Nr. 11
VENTILATION Every power amplifier requires ventilation. Position the KLOUT in such a way as to allow free movement of air around the heatsinks. Up to five KLOUTs can be stacked on top of each other without risk of overheating. We do not recommend stacking the KLOUT on any other product. The KLOUT will automatically shut down if it gets too hot. If this happens, provide more ventilation. INPUT CONNECTIONS The KLOUT has one pair of RCA phono sockets per channel labelled LINE INPUT and LINE OUTPU
Inhaltszusammenfassung zur Seite Nr. 12
CAUTION When passively bi-amping or tri-amping loudspeakers remove any connecting links that are at the speaker input terminals. Failure to do this will short the amplifier outputs together and may damage the power amplifier. OUTPUT CONNECTIONS Connection of the KLOUT to the loudspeakers should be made with a good quality cable. We recommend the use of Linn K series speaker cable and Linn KNEKT speaker plugs. Linn speaker cable is marked with the Linn logo to indicate directionality. The cable s
Inhaltszusammenfassung zur Seite Nr. 13
ADDITIONAL CONNECTIONS To operate the KLOUT via the KAIRN, connect the KAIRN REMOTE IN socket to the KLOUT REMOTE OUT socket. Additional KLOUTs can be chained using phono-phono interconnects from the REMOTE IN socket of one KLOUT to the REMOTE OUT socket of the next KLOUT. MAINS CONNECTION WARNING The KLOUT must be switched off and disconnected from the mains before checking the fuse. The KLOUT will be fitted with the correct fuse by your dealer. Before plugging into the mains, check that the v
Inhaltszusammenfassung zur Seite Nr. 14
NOTE As more KLOUTs are chained with the REMOTE link, the delay to switch on will increase by a few seconds per KLOUT. To switch off manually, press the switch on the KLOUT to OFF From the KAIRN, simply switch off the KAIRN. When the KLOUT is switched off, the green indicators will light red after a brief delay before fading out. The KLOUT is fitted with sophisticated self-protection circuitry. If the self- protection circuitry is activated for any reason, the affected channel indicator will li
Inhaltszusammenfassung zur Seite Nr. 15
GENERAL SYSTEM INSTALLATION TURNTABLES For best results a turntable should be placed on a small, light, rigid table, or alternatively wall mounted on a light, rigid shelf. CD PLAYER The KARIK and NUMERIK should be positioned on a level surface. Extensive internal screening in the KAIRN pre-amplifier, KREMLIN tuner, KARIK and NUMERIK facilitates stacking the products one on top of the other without interference, if desired. POWER SUPPLIES Take care not to position too close to signal leads, tur
Inhaltszusammenfassung zur Seite Nr. 16
MAINTENANCE FUSE PROTECTION A fuse is fitted to the power input socket on the rear of the KLOUT. There is also a space to store the spare fuse provided. WARNING The KLOUT must be switched off and disconnected from the mains before checking the fuse. If you require to check the fuse, unplug the mains cord and use a small screwdriver to open the fuse carrier on the mains inlet connector. Check the fuse and replace if necessary with the spare fuse provided. WARNING Never attempt any home maintenan
Inhaltszusammenfassung zur Seite Nr. 17
GENERAL SYSTEM INSTALLATION This product is guaranteed under the conditions which apply in the country of purchase. In addition to any statutory rights the customer may have, we undertake to replace parts which have failed due to faulty manufacture for a period of time. To help us, please ask your Linn retailer about the Linn warranty scheme in operation in your country. In many countries registration of your purchase with Linn or its distributor will enable you to receive copies of the Linn Rec
Inhaltszusammenfassung zur Seite Nr. 18
SPECIFICATIONS DIMENSIONS Width - 320mm Depth - 326mm Height - 80mm (incl. feet) INPUT IMPEDANCE 5 Kilohms VOLTAGE GAIN 28.5 dB POWER OUTPUT 80 Watts per channel into 8 Ohms 160 Watts per channel into 4 Ohms POWER CONSUMPTION 840 VA maximum MAINS SUPPLY/FUSE 220V/240V T3.15 Amps antisurge 100V/120V T6.3 Amps antisurge 12
Inhaltszusammenfassung zur Seite Nr. 19
Inhaltszusammenfassung zur Seite Nr. 20
PACK 567
