Bedienungsanleitung Bowens TRAVEL-PAK&TRAVEL-PAK+ BW7630

Inhaltszusammenfassung zur Seite Nr. 1

Travel-Pak
BW7630 - Unit Only
BW7631 - Starter Kit
(includes Unit, Case, Charger & Lead).
Travel-Pak+
BW7637 - Unit Only
BW7638 - Starter Kit
(includes Unit, Case, Charger & Lead).
TRAVEL-PAK & TRAVEL-PAK+
USER GUIDE BWL-0375/2 (07/06)
BOWENS INTERNATIONAL LIMITED
355 Old Road
Clacton On Sea
Essex CO15 3RH
Tel: +44 (0)1255 422807
Fax: +44 (0)1255 436342
www.bowens.co.uk
Due to our policy of constant product improvement, Bowens International Ltd reserves the right to change equipment specificati

Inhaltszusammenfassung zur Seite Nr. 2

Table of Contents Specifications Travel-Pak Travel-Pak+ BW-7630 BW-7637 Weight 4.1kg including bag and strap. 5.5kg including bag and strap. Description Page 180mm Length 180mm Width 120mm 155mm Height 130mm (175mm inc handle.) 130mm (175mm inc handle.) Introduction and Safety Notes 3 Typical Charge 2A charger - 3 hours approx. 2A charger - 5 hours approx. Time Control Panel Guide 4 Circuit Protection Non-user replaceable 20A Fuse. 7AH 12V Sealed Lead Acid. 12AH 12V Sealed Lead Acid. Connecting

Inhaltszusammenfassung zur Seite Nr. 3

Typical Flashes Introduction Number of Flashes Battery Condition Charge Time Dear Valued Customer, Battery Voltage (V) 500Ws @ 30sec Monitor (Seconds) Thank you for choosing the Bowens ‘Travel-Pak’ Battery Power Unit. TP TP+ The Travel-Pak has been designed using the latest technology to produce a unit that is simple to 00 >12.2 Good Green 4.5 operate, yet has a powerful, highly controllable and accurate output.. There are many accessories for the Travel-Pak and Esprit Gemini. For details o

Inhaltszusammenfassung zur Seite Nr. 4

Control Panel Guide Fault Finding Q My Flash Unit is not coming to ready. 1. Check errors by red charge indicators. See page 7. 2 1 Battery Level 2. Make sure when using one Flash Head the dummy socket is fitted. Head Sockets 3. Make sure Flash Head power switch is set to position II for battery operation. A & B 4. Check Travel-Pak is switched on and Green Power indicator is showing. 5. Power save mode activated. Change Fast/Slow switch to wake-up unit. 5 3 Power 6. Travel-Pak maybe overheate

Inhaltszusammenfassung zur Seite Nr. 5

General Questions Connecting Compatible Flash Heads Q My modelling lamp does not work when powered by Travel-Pak? Single Esprit Gemini Connection. A The Travel-Pak is not intended to run the modelling lamp. A single Esprit Gemini unit can be fitted to either channel A or B with the Travel-Pak cable. Please ensure that the dummy socket is fitted to the unused socket. Q Can I leave Mains connected to monoblock while operating with Travel-Pak? A No, DO NOT plug a mains lead in at the same time

Inhaltszusammenfassung zur Seite Nr. 6

Connection Order Display Indications The indicators flashing usually indicates normal charging. Switch off the Travel-Pak. 1 The following are only displayed in fault conditions. STEADY INDICATOR LONGER THAN 20 SECONDS [Condition: Travel-Pak unable to supply charge] Reason Suggested action Dummy plug not fitted in unused socket. Fit plug or connect a second Flash Head. Thermal cut-out initiated Wait for Travel-Pak to cool. 2 Connect Esprit Gemini(s). or ALTERNATE FLASHING INDICATORS [Condition: