Bedienungsanleitung Electro-Voice P1200

Inhaltszusammenfassung zur Seite Nr. 1

P1200
TM
Precision Series
Power Amplifier
• 370 watts per channel
at 8 ohms, 550 watts per
channel at 4 ohms, 650
watts per channel at 2 ohms
• Compact, two-rack-space
chassis
®
• Neutrik Speakon output
connectors allow use of
heavy-gauge speaker wire
for low-loss connections
• Three-year parts-and-labor
warranty
SPECIFICATIONS Frequency Response Output Topology:
Conditions: (–1 dB, reference 1 kHz/1 watt): True complementary symmetry with
1. 0 dBu = 0.775 V rms. 10-30,000 Hz ungrounded collecto

Inhaltszusammenfassung zur Seite Nr. 2

P1200 SPECIFICATION GRAPHICS FIGURE 1 — P1200 Dimensions FIGURE 2 — P1200 Intermodulation Distortion (SMPTE 60 Hz/7,000 Hz) vs. Power FIGURE 3 — P1200 Front and Rear Panel

Inhaltszusammenfassung zur Seite Nr. 3

Power Consumption (both channels The P1200 has built-in limiters to protect speak- Figure 3 shows P1200 front and rear panels. 1 operating in dual mode, /8 power), ers from the deleterious effects of amplifier The block diagram is shown in Figure 4. 4 Ohms: clipping. The limiter’s action is governed by ARCHITECTS’ AND ENGINEERS’ 550 VA very sophisticated input/output comparators SPECIFICATIONS Dimensions, (See Figure 1) which have acoustically optimized time con- The power amplifier shall be a d

Inhaltszusammenfassung zur Seite Nr. 4

sulting from misuse or abuse of the product; or property or loss of use. Some states do not UNIFORM LIMITED WARRANTY (e) malfunction occurring at any time after re- allow the exclusion or limitation of incidental or Electro-Voice products are guaranteed against pairs have been made to the product by anyone consequential damages so the above limitation malfunction due to defects in materials or work- other than Electro-Voice or any of its authorized or exclusion may not apply to you. Other Rights