Bedienungsanleitung Tamron Digital Compact Hi-Fi System CE510S

Inhaltszusammenfassung zur Seite Nr. 1

SPECIFICATIONS
RADIO SECTION
Frequency Range FM: 88 ~ 108 MHz
AM: 530 ~ 1700 KHz
CE510S
CASSETTE SECTION
Track system Compact cassette stereo
Recording System AC Bias
DIGITAL COMPACT HI-FI SYSTEM
Tape Normal
Frequency Response 100 – 8000 Hz
CD SECTION
Sampling Frequency 44.1 KHz
Frequency Response 20 Hz - 20 KHz
GENERAL
Woofer Speaker 100mm, 8 ohm
Output Power ( 10% THD )
2W x 2W
Weight 4 Kg.
POWER SOURCES
Mains Operation AC 120V/ 60Hz
Power Consumption 20W in AC operation
Dimensions Main

Inhaltszusammenfassung zur Seite Nr. 2

SAFETY INSTRUCTIONS - Read before operating equipment LOCATION OF CONTROLS AND INDICATORS This product was designed and manufactured to meet strict quality and safety standards. There are, however, 1 2 26 3 4 some installation and operation precautions which you should be particularly aware of. 1. Read Instructions – All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions – The safety and operating instructions should be retained for futu

Inhaltszusammenfassung zur Seite Nr. 3

PREPARATIONS AND CONTROLS RADIO OPERATION 1. Press the POWER button [8] once to turn the unit on. PREPARATIONS 2. Set the FUNCTION switch [9] to “RADIO” mode. 1. Carefully unpack the unit and speakers. Remove all packing material from around the unit. 3. Set the BAND selector [10] to the desired band. 2. Locate the unit horizontally on a heavy duty stand or firm level surface and away from the 4. Press the F. SKIP/ TUNING UP/ ADJ. UP button [2] or B. SKIP/ TUNING DOWN/ ADJ. speaker system to avo

Inhaltszusammenfassung zur Seite Nr. 4

REPEAT PLAY COMPACT DISC OPERATION 1. Press the REPEAT/ MEM. Up button [6] before or during normal play to repeat the track. The repeat function has 2 different modes. PLAYING A CD – Press the REPEAT/ MEM. UP button once to enter to the REPEAT ALL mode and the 1. Press the POWER button [8] once to turn the unit on. REPEAT indicator appears on the display. Track will be played in order and the entire disc 2. Set the FUNCTION switch [9] to “CD” mode. will be repeated endlessly. 3. Place a compact

Inhaltszusammenfassung zur Seite Nr. 5

STOP THE PLAY MODE RECORDING FROM RADIO Simply press the STOP button [4] to stop the play mode. 1. Set the FUNCTION switch [9] to “RADIO” mode. 2. Set the BAND selector [10] to the desired band. 3. Press the REPEAT/ MEM. UP button [6] to select the preset station, or use the F. SKIP/ TAPE OPERATION TUNING UP/ ADJ. UP button [2] and B. SKIP/ TUNING DOWN/ ADJ. DOWN [3] to tune in the desired station. GENERAL INFORMATION ON CASSETTE TAPES 4. Insert a cassette tape into the cassette compartment. • F

Inhaltszusammenfassung zur Seite Nr. 6

COMPACT DISC OPERATION MAINTENANCE CLEAN THE HEADS CONCERNING COMPACT DISCS 1. Usable compact discs To ensure the continued high performance of your unit, periodically clean the heads and pinch Use a compact disc bearing the mark as shown. rollers to prevent accumulation of dust or tape oxide deposits. Failure to clean these parts may result in distortion of recorded sound, deterioration of reproduction of high frequencies, and 2. Notes on handling discs inconsistent tape speed. • Removing the d

Inhaltszusammenfassung zur Seite Nr. 7

• For CD operation, see “SKIPPING FOR THE BEGINNING OF A TRACK”, “SEARCH A OPERATION OF REMOTE CONTROL UNIT PARTICULAR POINT OF A TRACK” and “MEMORY PLAY”. LOADING BATTERIES STOP button 1. Remove the battery compartment cover. It has the same function as the STOP button [4] on the main unit. See “COMPACT DISC 2. Insert 2 “AAA” size (R03) batteries as indicated by the polarity marking. (Placing the OPERATION”. batteries in the wrong way around cause malfunction.) RANDOM button 3. Close the batte