Inhaltszusammenfassung zur Seite Nr. 1
DS00427ACN_OS_3Si.qxp 12/20/04 5:51 PM Page a
INSTALLATION & OPERATION GUIDE
MODELS
OS6.3Si
OS6.3Si
OS5.3Si
OS5.3Si
Stereo Input Indoor/Outdoor Loudspeaker
B LENDING H IGH F IDELITY
®
AND A RCHITEC TURE
Inhaltszusammenfassung zur Seite Nr. 2
DS00427ACN_OS_3Si.qxp 12/20/04 5:51 PM Page b CONGRATULATIONS Thank you for choosing a Niles OS Indoor/Outdoor Loudspeaker. With proper installation and operation, you’ll enjoy years of trouble-free use. Niles manufactures the industry’s most complete line of custom installation components and accessories for audio/video systems. To learn more about Niles products visit our website: www.nilesaudio.com or call us at 800-BUY-HIFI (800-289-4434). TABLE OF CONTENTS INTRODUCTION 2 FEATURES & BENE
Inhaltszusammenfassung zur Seite Nr. 3
INTRODUCTION DS00427ACN_OS_3Si.qxp 12/20/04 5:51 PM Page 1 INTRODUCTION Niles once again raises the bar. With our first OS Indoor/Outdoor models we revealed a radical new understanding of loudspeaker capabilities. Niles original OS Indoor/Outdoor loudspeakers are constantly praised for their ability to deliver exemplary reliability and outstanding sound quality. These attributes have made Niles OS Indoor/Outdoor loudspeakers the best selling loudspeakers in their class. The goal of our new
Inhaltszusammenfassung zur Seite Nr. 4
FEATURES & BENEFITS DS00427ACN_OS_3Si.qxp 12/20/04 5:51 PM Page 2 FEATURES & BENEFITS Stereo Input “Si” Design Plays both left and right channels to provide broad sound coverage and a stereo effect from a single loudspeaker Patent Pending Integrated Woofer/Baffle Assembly Increases the woofer cone-area to cabinet-width ratio for enhanced bass output Mica-Filled Polypropylene Woofer Cone Reduces breakup and lowers distortion Butyl Rubber Woofer Cone Surround Damps resonance and provides excep
Inhaltszusammenfassung zur Seite Nr. 5
FEATURES & BENEFITS DS00427ACN_OS_3Si.qxp 12/20/04 5:51 PM Page 3 Architectural Friendly Design Delivers stellar acoustical performance yet tucks discretely away into corners and under eaves Low Diffraction Grille and Front Baffle Ensures that the sound waves emanating from the woofer and tweeter are not reflected by the surrounding parts of the loudspeaker for precise imaging and acoustical accuracy Rigid, Acoustically Inert Cabinet Prevents transmission of unwanted vibrations for clean and
Inhaltszusammenfassung zur Seite Nr. 6
PARTS GUIDE DS00427ACN_OS_3Si.qxp 12/20/04 5:51 PM Page 4 PARTS GUIDE c d b d b d a g g f e e Figure 1 OS-5.3Si and OS-6.3Si Parts Guide a. Bracket f. Grille b. Nail Hole g. Cabinet c. Wire Hole h. Binding Posts d. Screw Hole i. Threaded Insert (1/4"-20 Thread size) e. Bracket Knob 5
Inhaltszusammenfassung zur Seite Nr. 7
PARTS GUIDE DS00427ACN_OS_3Si.qxp 12/20/04 5:51 PM Page 5 PARTS GUIDE h h i 6
Inhaltszusammenfassung zur Seite Nr. 8
INSTALLATION CONSIDERATIONS DS00427ACN_OS_3Si.qxp 12/20/04 5:51 PM Page 6 INSTALLATION CONSIDERATIONS Tools and Materials Required • A wire stripper • A pencil • A level (optional) • Three screws or bolts suitable for the mounting surface • The proper screwdriver for your mounting hardware • A drill bit of the right size and type • An electric drill Wiring The OS loudspeaker connects to your receiver or amplifier using 2x2-conductor loudspeaker wire (See Figure 2). For most applications, we r
Inhaltszusammenfassung zur Seite Nr. 9
INSTALLATION CONSIDERATIONS DS00427ACN_OS_3Si.qxp 12/20/04 5:51 PM Page 7 Figure 2 Figure 3 Wiring directly from a receiver Incorporating a volume control or amplifier Incorporating a Volume Control It’s possible to control the volume of the sound at the loudspeaker location. Plan to wire the system so that each loudspeaker has it’s own volume control. Niles makes a wide range of indoor and outdoor volume controls. Consult your local Niles dealer for more information. Volume controls are con
Inhaltszusammenfassung zur Seite Nr. 10
INSTALLATION CONSIDERATIONS DS00427ACN_OS_3Si.qxp 12/20/04 5:51 PM Page 8 10' Figure 4 Illustration depicts the optimum placement zone for a listening distance of ten feet. Placing the OS Loudspeaker for the Best Sound Quality Traditionally, when using a pair of stereo loudspeakers, the listener will be positioned directly between the left and right loudspeakers to achieve optimum stereo sound. However, in some applications this is not possible, especially when a large area of coverage is re
Inhaltszusammenfassung zur Seite Nr. 11
INSTALLATION CONSIDERATIONS DS00427ACN_OS_3Si.qxp 12/20/04 5:51 PM Page 9 You can control the loudspeakers bass output by placement. This is called the boundary effect. You will get more bass response by mounting the OS loudspeaker directly to a wall or other flat surface (any boundary close to the loudspeaker will reinforce the bass frequencies). You can increase the bass output even more by mounting the OS loudspeaker in a corner or under an eave (See Figure 5) This type of placement gives
Inhaltszusammenfassung zur Seite Nr. 12
INSTALLATION CONSIDERATIONS DS00427ACN_OS_3Si.qxp 12/20/04 5:51 PM Page 10 Top View Nail Mounting Custom Bracket Mounting Screw Mounting Figure 7 The OS loudspeaker can be mounted three ways. 3. There is a threaded brass insert (1/4" – 20) on the back of the OS loudspeaker for attaching a custom bracket (See Figure 7). This allows you to position the loudspeaker at unusual angles or varying distances from the mounting surface. Safety First! Be careful to use hardware that is designed for the
Inhaltszusammenfassung zur Seite Nr. 13
PAINTING THE LOUDSPEAKER DS00427ACN_OS_3Si.qxp 12/20/04 5:51 PM Page 11 PAINTING THE LOUDSPEAKER The enclosure, the brackets, and the grilles of the OS loudspeaker can all be painted to match the surroundings. Because we want you to preserve the acoustic qualities of the grille, please paint the grille according to the grille painting instructions. Make sure you pick a paint that is appropriate for the mounting location. There are interior and exterior varieties, and even paint for marine use
Inhaltszusammenfassung zur Seite Nr. 14
PAINTING THE LOUDSPEAKER DS00427ACN_OS_3Si.qxp 12/20/04 5:51 PM Page 12 2. Wipe off the other sides of the cabinet, the bracket, bracket knobs, and grille with a damp cloth. Do not touch or rub the loudspeakers on the front baffle. Make sure everything is dry before masking. 3. Mask off the binding posts and the brass threaded inserts on the back panel with masking tape. 4. Mask off the threaded inserts on the top and bottom with masking tape. 5. Protect the front of the loudspeaker by insert
Inhaltszusammenfassung zur Seite Nr. 15
PAINTING THE LOUDSPEAKER DS00427ACN_OS_3Si.qxp 12/20/04 5:52 PM Page 13 If you are using an applicator or brush and a can of paint, thin the paint first. Thick paint will tend to clog the grille holes. To ensure a uniform appearance, paint the front and back of the grille. Replacing the Grille Carefully fit the grille into its recess so that it is barely in place. Starting with one corner, go around the speaker, pushing the grille in a little bit each time. You should be gentle, the aluminum
Inhaltszusammenfassung zur Seite Nr. 16
INSTALLATION DS00427ACN_OS_3Si.qxp 12/20/04 5:52 PM Page 14 INSTALLATION Mounting the Bracket (if attaching the loudspeaker to a wall, ceiling, beam or other solid structure) 1. Loosen the bracket knobs and remove the bracket from the loudspeaker. 2. Hold the bracket up to the mounting surface. The loudspeaker can be mounted either horizontally or vertically. Hold the bracket so that the loudspeaker wire fits through the large, circular wire hole in the center of the bracket. Align the bracke
Inhaltszusammenfassung zur Seite Nr. 17
INSTALLATION DS00427ACN_OS_3Si.qxp 12/20/04 5:52 PM Page 15 Connecting the Loudspeaker 1. Separate the two conductors of each loudspeaker wire so that at least two inches of each conductor are free. 2. Strip one half inch of insulation from the end of each conductor of the loudspeaker wires. 3. If you have any connectors (gold pins or bananas) which you prefer to use, affix them to the stripped wire ends now. Only gold plated connectors should be used outside as they will not tarnish or corr
Inhaltszusammenfassung zur Seite Nr. 18
INSTALLATION DS00427ACN_OS_3Si.qxp 12/20/04 5:52 PM Page 16 9. Tighten the bracket knobs using only your hands. Use of any power tools may over-tighten the knob, and strip the threads of the insert. 10. Check that the entire installation is safe and secure. Loudspeaker Phase Loudspeaker wire has two conductors. One conductor is attached to the negative (-) terminals and one conductor is attached to the positive (+) terminals of both your loudspeaker and your amplifier. Usually, the wire is ma
Inhaltszusammenfassung zur Seite Nr. 19
OPERATION DS00427ACN_OS_3Si.qxp 12/20/04 5:52 PM Page 17 OPERATION Listening at Higher Volumes Outdoors there are no walls to reflect and contain the sound. It requires more power to achieve a reasonable volume of sound outside than it does when you are indoors. You also frequently find yourself very far from the loudspeaker. It is possible to turn the volume so high that the amplifier runs out of power. This creates “clipping” distortion. Clipping distortion makes treble sound very harsh an
Inhaltszusammenfassung zur Seite Nr. 20
SPECIFICATIONS DS00427ACN_OS_3Si.qxp 12/20/04 5:52 PM Page 18 SPECIFICATIONS OS6.3Si Loudspeaker OS5.3Si Loudspeaker Recommended Amplifier Power Recommended Amplifier Power 5W – 125W per channel 5W – 100W per channel Nominal Impedance Nominal Impedance 8 ohms per channel, wired in stereo or 4 8 ohms per channel, wired in stereo or 4 ohms with both channels wired together ohms with both channels wired together Frequency Response Frequency Response 75Hz – 21kHz +/-3dB 85Hz – 21kHz +/-3dB Sensit
