Inhaltszusammenfassung zur Seite Nr. 1
APPLICATION GUIDE
Subwoofer-Satellite Systems
Using Control SB-210 & SB-2 Subwoofers
System #5 in Stereo
SPL (at 20 Feet):
94 dB Continuous (peaks of 104 dB)
Control 25AV Control 25AV Control 25AV Control 25AV
Left Right
(8 ohm setting) (8 ohm setting) (8 ohm setting) (8 ohm setting)
Satellite
Outputs
Left
MODULE SETTINGS:
From
Input
Power Stereo / Mono Selector: Stereo
Terminals
Amp
4-Ohm / 8-Ohm Selector: 4-Ohms
Right
Control SB-210 with
MT
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents SIX SUB-SAT SYSTEMS AT A GLANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 . . . . . . . . . . . . . IMPORTANT SATELLITE CONNECTION INFORMATION . . . . . . . . . . . . . . . . . .3 . . . . . . . SYSTEM CONSIDERATIONS General Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 . . . . . . . . . . . . . . . . . . . . . Sensitivity Balance Subwoofer Model Selection Designing for Other JBL Subwoofer Mo
Inhaltszusammenfassung zur Seite Nr. 4
SUB-SAT SYSTEMS AT A GLANCE Detailed Information About Each System and Application Guidelines are on the Following Pages. Ω Per SPL System Amp (Max Cont. Number Products Applications @ 20 ft) Modes Channel Surface-Mount (On-Wall) Satellite Speakers System 1 4 x Control 23 Light volume ambient music in 87 dB Stereo Only 4Ω (CCS6000) 1 x SB-2 medium size spaces where four speakers are needed. Mono 8Ω System 2 2 x Control 25AV Light to medium volume ambient 91 dB 1 x SB210 music in small to
Inhaltszusammenfassung zur Seite Nr. 5
Important Satellite Connection Information For Mono (& 70V Mono) Systems For Mono systems, always connect half the satellite speakers to one of the satellite speaker output terminals and the other half to the other satellite speaker output terminals. Do NOT connect to only one of the sets of satellite output terminals . In order to avoid excessively low impedance loads to the power amp when using 4 satellite speakers (which could cause the power amplifier to fail), the satellite output te
Inhaltszusammenfassung zur Seite Nr. 6
Sub-Sat System Design The exact configuration of a subwoofer/satellite loudspeaker system depends on a number of factors, such as: • How large the room is and how many satellite speakers it will take to cover the room? • Whether the distance between the satellite speakers allows a single subwoofer to cover the entire space? • Whether the program material is light background music or dominant driving music? • Where the subwoofer will be located in relation to room boundaries (wall, ceili
Inhaltszusammenfassung zur Seite Nr. 7
Sub-Sat Design Considerations Sound Level Capability 4 Ohm / 8 Ohm Setting (ie, Satellite Speaker Impedance Selector) For each system in this guide, the Max SPL figure is listed, The module contains a header adjustment for setting the crossover describing the continuous sound level that the system can to work properly with either 4 ohm or 8 ohm satellite loads per maintain on a full-range basis with either speech or music output. program content, with 10 dB headroom for clear transient
Inhaltszusammenfassung zur Seite Nr. 8
although the subwoofers can get excessively loud in those corners Adjusting Volume of 70V/100V System compared to the rest of the room. Adjust the tap setting to change the amount of power that gets to the entire sub/sat system. For rooms where very even subwoofer coverage is desired, a distributed subwoofer system might be a better solution than using Multiple Systems one of the passive subwoofer/satellite systems from this guide. If Multiple sub-sat systems can be utilized on a single s
Inhaltszusammenfassung zur Seite Nr. 9
Systems with SURFACE-MOUNT (on-wall) Satellite Speakers System #1: CCS6000 System 4 pcs Control 23 with Control SB-2 Application Application Note: Light volume ambient music in medium size spaces where This combination produces a great full-range sound with flat four speakers are needed. frequency response, usable from 38 Hz to 22 kHz. Max Continuous Average SPL (at 20 feet) Do NOT use a different quantity or model of satellite 87 dB (with peaks of 97 dB) speaker . Changing to a differe
Inhaltszusammenfassung zur Seite Nr. 10
System #2 2 pcs Control 25AV & Control SB-210 Application: Light to medium volume ambient music in Connection: small to medium sized spaces where two satellite speakers are Mono Operation – Connect input to the LEFT/MONO enough to cover the area. This system produces excellent high input terminal. Put Stereo/Mono header into MONO fidelity sound quality with very strong bass. position. Connect 1 pc of Control 25AV to each satellite output (LEFT and RIGHT). Do NOT connect both satel- Ma
Inhaltszusammenfassung zur Seite Nr. 11
System #2 in Stereo SPL (at 20 Feet): 91 dB Continuous (peaks of 101 dB) Control 25AV Control 25AV Left Right (8 ohm setting) (8 ohm setting) Satellite Outputs Left MODULE SETTINGS: From Input Power Stereo / Mono Selector: Stereo Terminals Amp 4-Ohm / 8-Ohm Selector: 8-Ohms Right Control SB-210 with MTC-210-SAT Crossover Input Module Stereo System Connection Note Ensure that the polarity hookup of the left and right inputs is correct. If one of
Inhaltszusammenfassung zur Seite Nr. 12
System #3 2 pcs Control 28 & Control SB-210 Application: Medium volume ambient music in small Connection: spaces where two satellite speakers are enough to cover the area. Mono Operation – Connect input to the LEFT input terminal. Put Stereo/Mono header into MONO position. Max Continuous Average SPL (at 20 feet): 95 dB (with Connect 1 pc of Control 28 to each satellite output (LEFT peaks of 105 dB) and RIGHT). Do NOT connect both satellite speakers to Max Output Balance -- The subwoof
Inhaltszusammenfassung zur Seite Nr. 13
System #3 in Stereo SPL (at 20 Feet): 95 dB Continuous (peaks of 105 dB) Right Left Control 28 Control 28 Satellite Outputs Left SUBWOOFER: Control SB-210 & From MTC-210-SAT Crossover Input Module Input Power Terminals Amp MODULE SETTINGS: Stereo / Mono Selector: Stereo Right 4-Ohm / 8-Ohm Selector: 8-Ohms Control SB-210 with MTC-210-SAT Crossover Input Module Stereo System Connection Note Ensure that the polarity hookup of the left and right inputs
Inhaltszusammenfassung zur Seite Nr. 14
System #4 2 pcs Control 29AV & Control SB-210 Application Connection High volume, high-fidelity music reproduction in small spaces Mono Operation – Connect input to the LEFT input where two satellite speakers are enough to cover the area. terminal. Put Stereo/Mono header into MONO position. Connect 1 pc of Control 28 to each satellite output (LEFT Max Continuous Average SPL (at 20 feet) and RIGHT). Do NOT connect both satellite speakers to 96 dB (with peaks of 106 dB) a single satellite
Inhaltszusammenfassung zur Seite Nr. 15
System #4 in Stereo SPL (at 20 Feet): 96 dB Continuous (peaks of 106 dB) Left Right Control 29AV-1 Control 29AV-1 Satellite (8 Ohm Setting) (8 Ohm Setting) Outputs Left MODULE SETTINGS: From Input Power Stereo / Mono Selector: Stereo Terminals Amp 4-Ohm / 8-Ohm Selector: 8-Ohms Right Control SB-210 with MTC-210-SAT Crossover Input Module Stereo System Connection Note Ensure that the polarity hookup of the left and right inputs is correct. If
Inhaltszusammenfassung zur Seite Nr. 16
System #5 4 pcs Control 25AV & Control SB-210 Application Connection Medium volume, high-fidelity music reproduction where 4 Mono Operation – Connect input to the LEFT input termi- satellite speakers are needed to cover the area. nal. Put Stereo/Mono header into MONO position. Con- nect 2 pcs of Control 25AV to each satellite output (LEFT Max Continuous Average SPL (at 20 feet) and RIGHT). Do NOT connect all 4 satellite speakers to 94 dB (with peaks of 104 dB) a single satellite output. M
Inhaltszusammenfassung zur Seite Nr. 17
System #5 in Stereo SPL (at 20 Feet): 94 dB Continuous (peaks of 104 dB) Control 25AV Control 25AV Control 25AV Control 25AV Left Right (8 ohm setting) (8 ohm setting) (8 ohm setting) (8 ohm setting) Satellite Outputs Left MODULE SETTINGS: From Input Power Stereo / Mono Selector: Stereo Terminals Amp 4-Ohm / 8-Ohm Selector: 4-Ohms Right Control SB-210 with MTC-210-SAT Crossover Input Module Stereo System Connection Note Ensure that the polarity
Inhaltszusammenfassung zur Seite Nr. 18
Systems with IN-CEILING Satellite Speakers In-ceiling loudspeakers can benefit from the addition of a subwoofer. Often that takes the form factor of an in-ceiling subwoofer like Control 19CS or Control 312CS, but it may be desirable to use a subwoofer with a full passive crossover. For more information about model selection, see the “Subwoofer Model Selection” and “Designing for Other JBL Subwoofer Models” sections, above. The SB-210 with MTC-210-SAT module is a subwoofer that contai
Inhaltszusammenfassung zur Seite Nr. 19
System #6 in Stereo SPL (at 10 Feet): 96 dB Continuous (peaks of 106 dB) Control 24C Control 24C Control 24C Control 24C Right Left Control 29AV-1 Control 29AV-1 Satellite (8 Ohm Setting) (8 Ohm Setting) Outputs Left MODULE SETTINGS: From Input Power Stereo / Mono Selector: Stereo Terminals Amp 4-Ohm / 8-Ohm Selector: 8-Ohms Right Control SB-210 with MTC-210-SAT Crossover Input Module Stereo System Connection Note Ensure that the polarity hook
Inhaltszusammenfassung zur Seite Nr. 20
JBL Professional 8500 Balboa Boulevard, P.O. Box 2200 Northridge, California 91329 U.S.A. CC Sub Sat A Harman International Company 11/06 © Copyright 2006 JBL Professional
