Bedienungsanleitung Infinity Primus Theater Pack II Primus Series

Inhaltszusammenfassung zur Seite Nr. 1

Primus Theater PackII OM 10/2/06 10:05 AM Page 9
PRIMUS THEATER PACK II
Owner’s Guide

Inhaltszusammenfassung zur Seite Nr. 2

Primus Theater PackII OM 10/2/06 10:05 AM Page 2 PRIMUS THEATER PACK II OWNER’S GUIDE Table of Contents 3 Introduction 3 Unpacking the System 3 Planning Your System 4 Placement 4 Wall-Mounting the Satellites 5 Center and Satellite Speaker Connections 6 Operation 6 Maintenance and Service 7 Specifications 2 PRIMUS THEATER PACK II

Inhaltszusammenfassung zur Seite Nr. 3

Primus Theater PackII OM 10/2/06 10:05 AM Page 3 INTRODUCTION PLANNING YOUR SYSTEM ® Before deciding where to best place your speakers, survey your room Infinity Primus Series and study Figures 1 and 2. The Primus Series of loudspeakers continues Infinity’s longstanding commitment to accurate sound reproduction. Our Optional Infinity ™ ® Subwoofer proprietary Metal Matrix Diaphragm (MMD ) drivers, precision dividing networks and rigid, well-braced enclosures combine to Left Right deliver unc

Inhaltszusammenfassung zur Seite Nr. 4

Primus Theater PackII OM 10/2/06 10:05 AM Page 4 WALL-MOUNTING THE SATELLITES AND PLACEMENT CENTER CHANNEL NOTE: The satellite speakers can be placed directly on a shelf, or mounted on a wall using the built-in keyhole mount or optional The Primus Theater Pack II satellites and center channel are wall brackets. designed to mount directly to a wall. Each satellite speaker has two keyholes on the back. Each speaker will require two (2) 1-1/2" Left and Right Front Channels #10 wood screws fasten

Inhaltszusammenfassung zur Seite Nr. 5

Primus Theater PackII OM 10/2/06 10:05 AM Page 5 CENTER AND SATELLITE SPEAKER CONNECTIONS Turn Off All Power Center Channel After placing the speakers, you are ready to connect your Observe polarities when making speaker connections, as shown system. First, turn off all audio-system power. Use high-quality in Figure 5. Connect each + terminal on the back of the speaker wire to make your connections. Use at least #16-gauge amplifier or receiver to the respective + (red) terminal on the speaker

Inhaltszusammenfassung zur Seite Nr. 6

Primus Theater PackII OM 10/2/06 10:05 AM Page 6 OPERATION MAINTENANCE AND SERVICE The satellite and subwoofer enclosures may be cleaned using a Surround Modes ® ® soft cloth to remove fingerprints or to wipe off dust. When using the system in a Dolby Digital or DTS home theater system, make sure all speakers are set to “Small” . The grilles may be gently vacuumed. Stains may be removed with an aerosol cleaner, following its instructions. Do not use any Some Dolby Digital-equipped receivers/p

Inhaltszusammenfassung zur Seite Nr. 7

Primus Theater PackII OM 10/2/06 10:05 AM Page 7 SPECIFICATIONS Primus Theater Pack II Satellites Center Channel Frequency Range: 100Hz – 20,000Hz (±3dB) 100Hz – 20,000Hz (±3dB) Recommended Amplifier Power Range: 10 – 100 Watts 10 – 100 Watts Sensitivity: 86dB 87dB (2.83V @ 1 meter) Nominal Impedance: 8Ω 8Ω Crossover Frequency: 3000Hz, 24dB/Octave 3000Hz, 24dB/Octave ® ® Midrange Driver(s): 4" (100mm) MMD, Dual 4" (100mm) MMD, magnetically shielded magnetically shielded ® ® High-Frequency Dri

Inhaltszusammenfassung zur Seite Nr. 8

Primus Theater PackII OM 10/2/06 10:05 AM Page 8 Infinity Systems, 250 Crossways Park Drive,Woodbury, NY 11797 USA www.infinitysystems.com Infinity, Harman International, Infinity Primus and MMD are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. Metal Matrix Diaphragm is a trademark of Harman International Industries, Incorporated. Dolby and Pro Logic are registered trademarks of Dolby Laboratories. DTS is a registered tr