Bedienungsanleitung PYLE Audio PAHT4

Inhaltszusammenfassung zur Seite Nr. 1












































Inhaltszusammenfassung zur Seite Nr. 2

Introduction Thank you for purchasing this Pyle Pro PAHT Tweeter System. The loudspeaker is designed to provide you years of high performance in any application that you require. Please read this manual carefully to fully maximize the performance of the speaker. Maintenance and Safety · Do not expose the speaker to moisture. · Avoid hot and cold temperature extremes. · Clean using a damp cloth. Make sure that no moisture contacts the drivers. You can use a hand vacuum to clean

Inhaltszusammenfassung zur Seite Nr. 3

Connections The PAHT speakers have “Quick Connect” speaker terminals, which accommodate wire leads. Make certain that the wires you are using are at least 14 gauge unshielded speaker cable (the lower the number, the thicker the wire). Do not use shielded “instrument” cables. Amplifier Requirements Check the product specifications (page 4) to see the power handling for your model. There are a couple of considerations to keep in mind when choosing an amplifier to drive your PAH

Inhaltszusammenfassung zur Seite Nr. 4

Troubleshooting No Sound:
 Check connections
 Try a different speaker cable
 Check levels on amplifier
 Confirm amplifier is getting a signal (check signal LED, or use headphone output) Intermittent Output:
 Check connections
 Try a different speaker cable Distorted Sound:
 Check if the amplifier is overdriven. If it is, you will have to turn the level down.
 Make sure you are not exceeding the RMS rating of your speaker. Specifications    

Inhaltszusammenfassung zur Seite Nr. 5

Parallel Setup

Crossover Setup


  5

Inhaltszusammenfassung zur Seite Nr. 6

Recommended Accessories
















 




 

  

  
        
 

$ 

   
        !"#     !"#     
  




+%&'
$%&'