Inhaltszusammenfassung zur Seite Nr. 1
USER MANUAL
System 800
Inhaltszusammenfassung zur Seite Nr. 2
INTRODUCTION This loudspeaker is a very compact, professional near-field reference monitor. Using an advanced Dual Concentric 8” driver, if offers the advantages of the point source operation in a very cost-effective design. The attractive octagonal shape of the balance for even more transparent and fatigue-free monitoring. Designed to be located on top of the mixing console, in a landscape format, it will This manual is intended to provide the user with some useful advice on how to install syst
Inhaltszusammenfassung zur Seite Nr. 3
Installing and connecting the loudspeakers. When choosing a suitable location for the monitors, bear in mind that the physical ..) is recommended. develop, on the other hand if you place them too far apart you will notice an audible hole in the middle of the stereo image. have a clear, uninterrupted view of the monitor loudspeakers. Connection to the amplifier is made by means of a pair of banana sockets, located is observed. The red terminal on the amplifier, and the black terminal on the louds
Inhaltszusammenfassung zur Seite Nr. 4
SYSTEM DESCRIPTION AND PHILOSOPHY : cabinet, drive unit(s) and Drive unit. The drive unit used in the System 800 monitors is part of the latest generation of of drivers incorporate a dual magnet assembly, ‘tulip’ HF waveguide and injection The design of the HF waveguide has been arrived at by making extensive use of diaphragm into the acoustic environment, shaping the wavefront as it travels down from the diaphragm ensuring equal path lengths to achieve a spherical wavefront. linearities are m
Inhaltszusammenfassung zur Seite Nr. 5
the emitted sound field, are too often overlooked although they are the cause of most of the irregularities careful attention paid regarding the sculptured front panel to provide smooth, diffractions. Another problem involved in cabinet design is to ensure that the box will effectively , ideally without interfering at all with the sound field emitted by the drive unit and the port. There are two main ways the box can get into vibration. First there can be a mechanical transfer of energy betwee
Inhaltszusammenfassung zur Seite Nr. 6
SERVICING Cabinet finish. To remove marks and scuffs use a medium soft brush. If necessary, a little warm Dual Concentric driver removal. driver from the front of the cabinet taking care not to mark the front surface. Use a piece of stout cardboard to lever against if necessary. Remove the driver, note not to damage the moving parts of the LF driver. To refit the driver, connect the cables from the crossover to the LF and HF terminals. Fit the driver into mounting hole, making sure that the inte
Inhaltszusammenfassung zur Seite Nr. 7
frequency of the sweep is limited according to the voltage level ; for instance with levels exceeding 10V rms the frequency should be kept above 100 Hz. List of spare parts. PART NUMBER DESCRIPTION Warranty All components are guaranteed for a period of five years from the date of manufacture, subject to the absence of, or evidence of, misuse, overload or For further information please contact your dealer or the distributor in your country. contact : Customer Services ML5 4TF Fax DO NOT SHIP ANY
Inhaltszusammenfassung zur Seite Nr. 8
CURVES Figure 1. On axis anechoic response. Figure 2. Impedance.
Inhaltszusammenfassung zur Seite Nr. 9
TECHNICAL SPECIFICATIONS System Recommended amplifier power 60 to 180 W rms into 8 Ω Programme 90 W rms 180 W rms Nominal Impedance 8 Ω Sensitivity (3) 92 dBSPL / 1 W @ 1 m Distortion < 0.8% Dispersion (@ -6dB) ° conical Cabinet Drive unit Optimised bass-reflex load, in 21 litres Cabinet construction MDF (36 mm front panel ) Cabinet finish Spray ‘F’ Vinyl Cabinet dimensions (HxWxD) 275 mm x 450 mm x 267 mm 10.5 kg Shipping dimensions (HxWxD) 540 mm x 695 mm x 355 mm 23 kg NOTES : notice. Please
Inhaltszusammenfassung zur Seite Nr. 10
Declaration of Conformity The following apparatus is/are manufactured in the United Kingdom by Tannoy Ltd of Rosehall Industrial estate, Coatbridge, Scotland, ML5 4TF and conform(s) to the protection requirements of the European Electromagnetic Compatibility Standards and Directives relevant to Domestic Electrical Equipment. The apparatus is designed and constructed such that electromagnetic disturbances generated do not exceed levels allowing radio and telecommunications equipment and other app
Inhaltszusammenfassung zur Seite Nr. 11
For Tannoy Ltd
Inhaltszusammenfassung zur Seite Nr. 12
Tannoy Loudspeakers are manufactured in Great Britain by : Tannoy Ltd, Rosehall Industrial Estate, Coatbridge, Strathclyde, ML5 4TF, SCOTLAND Telephone: +44 (0)1236 420199 Fax: +44 (0)1236 428230 Internet:http://www.tannoy.com Issue 2 Part No. 6481 0244 Telephone: (010) 2860554 Fax: (010) 2860431 Kuijlstraat 19, 3066 GS, Rotterdam THE NETHERLANDS Anthonetta Nederland BV, Tannoy Telephone: (519) 745 1158 Fax: (519) 745 2364 Gage Avenue, Suite 1, Kitchener,
