Inhaltszusammenfassung zur Seite Nr. 1
Instruction Manual
MEMO
Underwater Case
PT-021
For the digital camera
CAMEDIA X-350
■ Thank you for buying the Underwater Case PT-021.
■ Please read this instruction manual carefully and use the product
safely and correctly.
Please keep this instruction manual for reference after reading it.
■ Wrong use may cause damage to the camera on the inside from
water leakage, and repair may not be possible.
■ Before use, perform an advance check as described in this manual.
Inhaltszusammenfassung zur Seite Nr. 2
Introduction WARNING ● Unauthorized copying of this manual in part or in full, except for 1. Keep this product out of the reach of babies, infants, and children. private use, is prohibited. There is the possibility of occurrence of the following types of accidents. Unauthorized reproduction is strictly prohibited. Injury by dropping onto the body from a height. ● OLYMPUS CORPORATION shall not be responsible in any way Injury from parts of the body getting caught in parts which open and for l
Inhaltszusammenfassung zur Seite Nr. 3
Introduction WARNING ● Unauthorized copying of this manual in part or in full, except for 1. Keep this product out of the reach of babies, infants, and children. private use, is prohibited. There is the possibility of occurrence of the following types of accidents. Unauthorized reproduction is strictly prohibited. Injury by dropping onto the body from a height. ● OLYMPUS CORPORATION shall not be responsible in any way Injury from parts of the body getting caught in parts which open and for l
Inhaltszusammenfassung zur Seite Nr. 4
5. Jumping into the water with the Case in your pocket or in your For Prevention of Water Leakage Accidents hand, throwing the Case from a boat or ship into the water, and When water leakage occurs while this product is being used, repair of other rough handling may cause water leakage. Please handle with the camera housed in this product may become impossible. Please sufficient care, when handing it over from hand to hand etc. observe the following cautions for use. 6. If the camera on the insi
Inhaltszusammenfassung zur Seite Nr. 5
5. Jumping into the water with the Case in your pocket or in your For Prevention of Water Leakage Accidents hand, throwing the Case from a boat or ship into the water, and When water leakage occurs while this product is being used, repair of other rough handling may cause water leakage. Please handle with the camera housed in this product may become impossible. Please sufficient care, when handing it over from hand to hand etc. observe the following cautions for use. 6. If the camera on the insi
Inhaltszusammenfassung zur Seite Nr. 6
8. When the O-ring contact surface is pressed strongly from the Chemicals which cannot be used Explanation outside of the Case, or when the Case is twisted, the waterproof Do not clean the Case with alcohol, gasoline, thinner function may be lost. Take care not to exert excessive force. Volatile organic solvents, or other volatile organic solvents or with chemical 9. Please use the Case after performing the advance test and the chemical detergents detergents etc. Pure water or lukewarm water is
Inhaltszusammenfassung zur Seite Nr. 7
8. When the O-ring contact surface is pressed strongly from the Chemicals which cannot be used Explanation outside of the Case, or when the Case is twisted, the waterproof Do not clean the Case with alcohol, gasoline, thinner function may be lost. Take care not to exert excessive force. Volatile organic solvents, or other volatile organic solvents or with chemical 9. Please use the Case after performing the advance test and the chemical detergents detergents etc. Pure water or lukewarm water is
Inhaltszusammenfassung zur Seite Nr. 8
Contents Introduction E-1 E-20 Please read the following items before use E-1 E-20 For safe use E-1 E-21 Batteries E-3 4.Taking Pictures Under Water E-22 For Prevention of Water Leakage Accidents E-4 E-22 Handling the Product E-5 E-22 E-22 Contents E-7-8 E-22 E-22 1.Preparations E-9 Check the contents of the package. E-9 5.Handling After Shooting E-23 Names of the parts E-10 Install the strap. E-11 E-23 Master the basic operation. E-11 E-24 E-25 Holding the Case E-11 E-25 How to Press the
Inhaltszusammenfassung zur Seite Nr. 9
Contents Introduction E-1 E-20 Please read the following items before use E-1 E-20 For safe use E-1 E-21 Batteries E-3 4.Taking Pictures Under Water E-22 For Prevention of Water Leakage Accidents E-4 E-22 Handling the Product E-5 E-22 E-22 Contents E-7-8 E-22 E-22 1.Preparations E-9 Check the contents of the package. E-9 5.Handling After Shooting E-23 Names of the parts E-10 Install the strap. E-11 E-23 Master the basic operation. E-11 E-24 E-25 Holding the Case E-11 E-25 How to Press the
Inhaltszusammenfassung zur Seite Nr. 10
Names of the parts 1. Preparations Check the contents of the package. Check that all accessories are in the box. Contact your dealer if accessories should be missing or damaged. LCD hood Silica gel Silicone grease (on the body) Case body LCD hood strap Hand strap Lenscap Balance weight (Check that the O-ring is normal.) Pick for O-ring removal Instruction manual Warranty card Diver's insurance guide (this manual) Lens window Palm grip Grease for silicone O-ring(white cap) ❈ Play back button Buc
Inhaltszusammenfassung zur Seite Nr. 11
Names of the parts 1. Preparations Check the contents of the package. Check that all accessories are in the box. Contact your dealer if accessories should be missing or damaged. LCD hood Silica gel Silicone grease (on the body) Case body LCD hood strap Hand strap Lenscap Balance weight (Check that the O-ring is normal.) Pick for O-ring removal Instruction manual Warranty card Diver's insurance guide (this manual) Lens window Palm grip Grease for silicone O-ring(white cap) ❈ Play back button Buc
Inhaltszusammenfassung zur Seite Nr. 12
Install the strap. How to Press the Shutter Install the strap on the Case body. When pressing the shutter lever, press it gently, so that Installation explanation Finished installation there will be no movement of the camera. Hand strap Hand strap ring Please install the strap correctly as shown above. OLYMPUS CAUTION Note • For detailed operation of the shutter, refer to the instruction CORPORATION shall bear no responsibility for damage etc. caused by manual for the digital camera. dropping th
Inhaltszusammenfassung zur Seite Nr. 13
Install the strap. How to Press the Shutter Install the strap on the Case body. When pressing the shutter lever, press it gently, so that Installation explanation Finished installation there will be no movement of the camera. Hand strap Hand strap ring Please install the strap correctly as shown above. OLYMPUS CAUTION Note • For detailed operation of the shutter, refer to the instruction CORPORATION shall bear no responsibility for damage etc. caused by manual for the digital camera. dropping th
Inhaltszusammenfassung zur Seite Nr. 14
2. Advance Check of the Case 3. Install the digital camera. Advance test before use Check the digital camera. This Case has been the subject of thorough quality control for the Check the digital camera before loading it in the Case. parts during the manufacturing process and thorough function Battery Confirmation inspections during the assembly. In addition, a water pressure test is performed with a water pressure tester for all products to confirm As the LCD monitor is used for picture confirma
Inhaltszusammenfassung zur Seite Nr. 15
2. Advance Check of the Case 3. Install the digital camera. Advance test before use Check the digital camera. This Case has been the subject of thorough quality control for the Check the digital camera before loading it in the Case. parts during the manufacturing process and thorough function Battery Confirmation inspections during the assembly. In addition, a water pressure test is performed with a water pressure tester for all products to confirm As the LCD monitor is used for picture confirma
Inhaltszusammenfassung zur Seite Nr. 16
Loading in the Case Open the Case. Insert the buckle opener of the accessory into the buckle opening Which digital cameras can be loaded? lever as shown in the figure (in direction ) Pull the buckle opener This product (PT-021) is exclusively used for the CAMEDIA X-350. slowly (in direction ). When not using the buckle opener, hold the buckle opening lever with your thumb and index finger from the side Open the lens barrier. and pull it up slowly. The power is switched on when the lens barrier o
Inhaltszusammenfassung zur Seite Nr. 17
Loading in the Case Open the Case. Insert the buckle opener of the accessory into the buckle opening Which digital cameras can be loaded? lever as shown in the figure (in direction ) Pull the buckle opener This product (PT-021) is exclusively used for the CAMEDIA X-350. slowly (in direction ). When not using the buckle opener, hold the buckle opening lever with your thumb and index finger from the side Open the lens barrier. and pull it up slowly. The power is switched on when the lens barrier o
Inhaltszusammenfassung zur Seite Nr. 18
Insertion of silica gel Seal the Case. Before sealing the Case, insert the accessory silica gel bag for When the rear lid is closed (quietly, so that the O-ring will not come out of the prevention of fogging between the bottom of the camera and the groove), the buckles are engaged with the edge of the rear lid, and the buckle Case. Insert the bag with the glued longer side to the inside. lock levers are pushed down in arrow direction, the Case will be sealed airtight. Pay attention to the orient
Inhaltszusammenfassung zur Seite Nr. 19
Insertion of silica gel Seal the Case. Before sealing the Case, insert the accessory silica gel bag for When the rear lid is closed (quietly, so that the O-ring will not come out of the prevention of fogging between the bottom of the camera and the groove), the buckles are engaged with the edge of the rear lid, and the buckle Case. Insert the bag with the glued longer side to the inside. lock levers are pushed down in arrow direction, the Case will be sealed airtight. Pay attention to the orient
Inhaltszusammenfassung zur Seite Nr. 20
Installation and Removal of the LCD Hood Perform the final checks. Installation Visual Inspection Strongly push the mounting projections of the LCD hood as shown in After sealing the Case, check the sealing part of front and rear lid the figure into the guides above and below the LCD monitor window. visually to confirm that the O-ring is not twisted or out of the groove and that no foreign matter has been caught. Removal Remove the mounting projections of the : • Hairs, fibers, and other narrow
