Bedienungsanleitung Polk Audio 3000

Inhaltszusammenfassung zur Seite Nr. 1

SurroundBar3000
Frequently Asked Questions
Breathe. Relax. Here Are the Most Commonly Asked Questions and Concerns
®
About Setting Up and Programming the SurroundBar 3000.
Our Customer Service Department has compiled the most A special note on the power button: When training
commonly asked questions people have about connecting and the bar’s power command, when you get to step 3,
programing their SurroundBar3000 Instant Home Theater. If you The power button is the flashing orange light. A

Inhaltszusammenfassung zur Seite Nr. 2

SurroundBar3000 Frequently Asked Questions 6. Can you supply me the 4 or 5 digit code to punch into my cable/satellite box remote to control the Polk SurroundBar? § There really isn’t a code to program. What happens is the bar learns to respond to your original TV remote codes. Do not use a DirecTV, cable box or similar remote to do the training. You can still use these but only AFTER you’ve trained the bar to respond to your original TV remote. See the first Question. 7. I just got

Inhaltszusammenfassung zur Seite Nr. 3

SurroundBar3000 Frequently Asked Questions SurroundBar3000 Connectivity Questions. 1. What does Source 1, 2 and 3 do? 5. I connected the bar with the optical connection (Source 1) and get no sound. § This allows you to connect different devices to the bar . As an example, you can connect the TV to Source 1, and A few things to check: also connect an MP3 player to Source 2 and a video game 1) Be sure the optical cable is firmly plugged in on both system or laptop to Source 3. Source 1 is

Inhaltszusammenfassung zur Seite Nr. 4

SurroundBar3000 Frequently Asked Questions 9. How do you adjust the bass/treble levels of this unit? § Y ou can adjust the bass level by adjusting the subwoofer level, but you cannot adjust the treble level. To adjust the subwoofer level you can do it one of two ways: a. Use the included remote and look for the “sub +” and “sub –“ keys. While the SurroundBar system is on and playing sound, aim the remote at the bar (not the subwoofer) and you should see the lights on the bar flash whi

Inhaltszusammenfassung zur Seite Nr. 5

SurroundBar3000 Frequently Asked Questions SurroundBar3000. No Sound. Funny Sound. And Things that Go Bump In the Night. 1. The bar has no sound and has a slow blinking green on 6. The subwoofer is making funny noises on its own. the front status light. § The unit is likely getting wireless interference. Try changing § The bar is either muted or turned down all the way. Try the “channel ID” switch on the back of both the subwoofer unmuting the bar or turning up the volume control. and t

Inhaltszusammenfassung zur Seite Nr. 6

SurroundBar3000 Frequently Asked Questions Bar Placement, IR Senors and other Questions Installers Ask. 1. How do I mount this bar on the wall? § This bar has two keyhole slots on the back that are 16-3/4” apart. You would need to put some screws or anchors (not supplied) suitable for your wall construction and let the heads stick out slightly, then hang the speaker bar on the wall. (insert line drawing?) 2. Where is the IR sensor on this bar? § The IR sensor is exactly 16.1 inches from