Bedienungsanleitung Maxxsonics MW10D2

Inhaltszusammenfassung zur Seite Nr. 1

R
EVOLUTION OF POWER
MEAN MACHINE
SUBWOOFERS
MW10D2 / MW10D4 / MW12D2 / MW12D4
MW15D2 / MW12SQD4

Inhaltszusammenfassung zur Seite Nr. 2

a utotek MEAN MACHINE SERIES SUBWOOFERS Congratulations on your purchase of the new Autotek Mean Machine Series High Power subwoofer system. The MW series subwoofers offer superior sonic accuracy, high power handling, great sound quality with exotic build materials and outstanding good looks. 2.5” 2-Ohm & 4-Ohm High-Temp Dual Voice Coils on most models 1” NBR Reinforced and Stitched Rubber Surround 100oz Double-Stack Magnet Assembly Single Flat Nomex Spider With Woven Tinsel Leads Polypropylen

Inhaltszusammenfassung zur Seite Nr. 3

SUBWOOFER INSTALLATION AND WIRING DIRECTIONS Enclosure Materials Typically, 5/8” or 3/4” MDF (Medium Density Fiber Board) is best for most applications. 3/4” MDF is recommended. Enclosure Build Materials Connecting joints need to be glued and screwed to ensure no air escapes and joints do not separate under high pressure. Mitered and rabbit joints also help to ensure the enclosure joints are secure. Bracing Internal bracing is also recommended to prevent flexing and to strengthen the enclosure.

Inhaltszusammenfassung zur Seite Nr. 4

3 4+4

Inhaltszusammenfassung zur Seite Nr. 5

4

Inhaltszusammenfassung zur Seite Nr. 6

Glossary of Terms Q The energy losses of relative damping (ratio of stored to dissipated energy or ratio of reactive to resistive energy). Fs Free air resonance of driver in Hz. Qms Mechanical Q. Vas Volume of air equivalent to driver from the rest position. Cms Mechanical compliance of a loud speaker piston. Mms Moving mass of total loud speaker piston assembly. Xmax The maximum linear excursion of a loud speaker. Sd Surface area of the cone. Dia The piston diam

Inhaltszusammenfassung zur Seite Nr. 7

autotek autotek autotek autotek autotek autotek + + + + + + MW10D4 / MW12D4 / MW12SQD4 DVC 4-Ohms PARALLEL SERIES 2-Ohms 8-Ohms autotek autotek + + - - PARALLEL COILS / PARALLEL SUBS 1-Ohm autotek autotek + - SERIES COILS / PARALLEL SUBS 4-Ohms autotek autotek - + 6 + + + + + + autotek autotek autotek autotek autotek autotek autotek autotek autotek autotek autotek autotek

Inhaltszusammenfassung zur Seite Nr. 8

autotek autotek autotek autotek autotek autotek + + + + + + MW10D2 / MW12D2 / MW15D2 DVC 2-Ohms PARALLEL SERIES 1-Ohms 4-Ohms autotek autotek + + - - PARALLEL COILS / PARALLEL SUBS 0.5-Ohms autotek autotek + - SERIES COILS / PARALLEL SUBS 2-Ohms autotek autotek - + 7 + + + + + + autotek autotek autotek autotek autotek autotek autotek autotek autotek autotek autotek autotek

Inhaltszusammenfassung zur Seite Nr. 9

Subwoofer Dimensions B A Model A - Cut Out Diameter B - Mounting Depth MW10 9.1” / 230mm 6.2” / 157.48mm MW12 11” / 280mm 6.9” / 175.26mm MW15 13.8” / 350mm 8” / 203.2mm MW12SQ 11.1” x 11.1” 7.3” / 185.42mm 282 x 282mm

Inhaltszusammenfassung zur Seite Nr. 10

Maxxsonics Limited Warranty As the manufacturer of Maxxsonics, MB Quart, Autotek, Crunch and Hifonics car audio products, Maxxsonics USA Inc. Warrants to the original consumer purchaser the amplifier to be free from defects in material and workmanship for one (1) Year from date of purchase. All other parts and accessories of the system are warrantied to be free from defects in material and workmanship for one (1) year from date of purchase. Maxxsonics will repair or replace at it’s option and

Inhaltszusammenfassung zur Seite Nr. 11