Bedienungsanleitung Klipsch IC-SW-8T2

Inhaltszusammenfassung zur Seite Nr. 1

I C - S W- 8 T 2 I N -C E ILI N G S U B W O OFE R
O WNE R ’ S M AN U A L A N D W A R RA N T Y

Inhaltszusammenfassung zur Seite Nr. 2

I C - S W -8T2 Thank you for purchasing your 3. To install the tilebridge, fold the rail side of the ring back Klipsch IC-SW-8T2 in-ceiling subwoofer. upon itself using the spring tensioner on the reinforcement ring to allow insertion into the cutout hole. Once it is inserted into The IC-SW-8T2 in-ceiling speaker is designed for music reinforce- the cutout hole, release the reinforcement ring such that it ment applications. Unobtrusive, these loudspeakers are engi- unfolds back to its normal p

Inhaltszusammenfassung zur Seite Nr. 3

70V 5. Insert the speaker into the cutout hole. With a #2 Phillips screw- 6. For installations using 70v/100v input connection, set the driver, tighten the four dog clamps until they are seated securely switch on the front panel to "70V/100V". against the ceiling surface. Do not overtighten. For low impedance, stereo applications, the switch should be set to 8 ohms stereo. For low impedance, mono applications, the switch should be set to 4 ohm mono. In all cases, please make sure the speaker wir

Inhaltszusammenfassung zur Seite Nr. 4

I N - C EIL I N G S U B W O O F E R I C - S W -8 T 2 SPECIFICATIONS IC-SW-8T2 FREQUENCY RESPONSE 50-130 Hz +/- 4 dB CONT. POWER HAND. 150 watts (27 V) C ALC MAX CONT. OUTPUT @ 1M 111 dB SENSITIVIT Y 2.83 V/1M 92 dB COVERAGE N/A DI N/A Q N/A NOMINAL IMPEDANCE 6 ohms, min 4.9 ohms, switch set to mono or stereo position DIAMETER 14.125" CUTOUT DIAMETER 14.25" OVERALL DEPTH 13.625" MOUNTING DEPTH 13.313" WEIGHT 23 lbs. INPUT CONNECTORS Terminal S trip TRANSFORMER TAPS 70V: 60W, 30W 100V: 120W,

Inhaltszusammenfassung zur Seite Nr. 5

Inhaltszusammenfassung zur Seite Nr. 6

3502 Woodview Trace, Suite 200 Indianapolis, Indiana 46268 USA . . 1 800 KLIPSCH www.klipsch.com • 193152 1111