Bedienungsanleitung Channel Vision 6106

Inhaltszusammenfassung zur Seite Nr. 15

Fig.1 6.4.2 Connecting the Alarm Alarm Installation Connect GND and AL of the camera to the GND and AL of the alarm. Note: The alarm is triggered by motion detection. 14

Inhaltszusammenfassung zur Seite Nr. 16

7. OPERATION 1. Mount the camera on the mounting bracket by using the hole on the top or bottom of the camera, and by using the enclosed mounting block, secured by 2 screws. 2. Connect the video output to the monitor or other video device via a 75 Ohms type coaxial cable. 3. Power Input Terminal (Dual Power): the camera accepts both AC 24V and DC 12 V power sources (non-polarity). 7.1 PELCO Keyboard (or compatible) Operation Normal Display Mode PELCO Keyboard Camera Function OPEN

Inhaltszusammenfassung zur Seite Nr. 17

8. SYSTEM SETUP 8.1 Digital Zoom Operation: Under normal display (before entering the OSD menu), use (T)/ (W) button to control the digital zoom (zoom range: 1 x ~ 16 x). 8.2 OSD (On Screen Display) Main Menu Display MAIN MENU V .9729 LENS TYPE MANUAL/DC EXPOSURE ? ? WHITE BALANCE ? ? PRIV ACY MASK ? ? EFFECT ? ? NOISE REDUCTION ? ? MOTION DETECT ? ? COMMUNICATION ? ? DEFAULT ON EXIT Main Menu Setupß In order to display the setup menu on the screen, set the

Inhaltszusammenfassung zur Seite Nr. 18

8.3 Sub Menu Description 8.3.1 LENS TYPE Built-in DC-type Vari-Focal lens with ICR (although the camera OSD supports both DC-type and Manual-type lenses, it is fixed to DC type because the camera is built-in only with a DC-type Vari-Focal lens). 8.3.2 EXPOSURE Setup EXPOSURE MODE [WDR] AGC MAX 128 SHUTTER SPEED AUTO DESS MAX OFF DEFAULT ON RETURN 1. MODE: There are four types of modes: [WDR] / [BLC SMART] / [BLCUSER] / [NORMAL]. When the function option is set

Inhaltszusammenfassung zur Seite Nr. 19

[BLCUSER] Setup: BLC EXPOSURE AREA CENTER START X NA END X NA START Y NA END Y NA LEVEL 7 DEFAULT ON RETURN (1) AREA: Setup to BLC, the area is set as BLC area and under manual mode (1) CENTER (2) TOPS (3) TOPL (4) BOTTOMS (5) BOTTOML (6) LEFT (7) RIGHT (Default Setup: NA). (2) START X: Horizontal start position (NA). (3) END X: Horizontal end position (NA). (4) START Y: Vertical start position (NA). (5) END Y: Vertical end position (NA). (1) C ENTER

Inhaltszusammenfassung zur Seite Nr. 20

2. AGC MAX: Set AGC MODE to AUTO, AGC MAX setup range = 0~255. 3. SHUTTER SPEED consists of 9 types of modes: AUTO, NORMAL, FLICKERLESS (NTSC: 1/60 and PAL: 1/50), 1/250, 1/1000, 1/2000, 1/4000, 1/10000, 1/20000, 1/50000 and 1/100000 (Default Setup: NORMAL). 4. DSS MAX: Low speed shutter control, offers optimal brightness level. Therefore, in dark scene, raise the value higher than the the brightness level (Field Range: 2~256, Default Setup: OFF). 5. DEFAULT: Return to default setup. 6

Inhaltszusammenfassung zur Seite Nr. 1

6106
Indoor WDR Color IR Dome Camera
6128
Outdoor WDR Vandal-Proof IR Color Dome Camera
11

Inhaltszusammenfassung zur Seite Nr. 2

Contents 1. SAFETY PRECAUTIONS.................................................................................. 2 2. INTRODUCTION............................................................................................... 3 3. FEATURES ......................................................................................................... 4 4. PACKING LIST.................................................................................................. 5 5. NAME and FUNCTION of EACH

Inhaltszusammenfassung zur Seite Nr. 3

1. SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN! C CA AU UT TI IO ON N : : TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT OPEN COVERS (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. It is advised to read the Safety Precaution Guide through carefully before operating the product, to prevent any possible danger. WARNING: Alert the user to the pr esence of un-insulated ? dangerous voltage

Inhaltszusammenfassung zur Seite Nr. 4

2. INTRODUCTION This WDR digital image camera uses a high resolution color Sony 1/3” interline transfer Charge Coupled Device (CCD) image sensor, producing clear images reaching 650 lines of horizontal resolution. Using Super Wide Dynamic Range technology, this camera is able to capture both high- luminance and low luminance subjects under a wide variety of shooting conditions. 3-D Noise Reduction technology automatically reduces noise in low light environments after noise reductio

Inhaltszusammenfassung zur Seite Nr. 5

3. FEATURES Excellent Sensitivity High Resolution CCD Sensor provides high resolutions High sensitivity, low smear, high anti- blooming and high S/N ratio. reaching 650 TV lines with crisp, clear picture quality. Wide Dynamic Range (WDR) Digital Noise Reduction (DNR) 2D/ 3D DNR, captures clear images in High-quality WDR functionality, low light environments, saving DVR perfectly shows the image details hard disk storage space when using between dark and light. The newly added MP

Inhaltszusammenfassung zur Seite Nr. 6

4. PACKING LIST Check and make sure all the items shown below are included in your product package. If something is missing, contact your dealer as soon as possible. Dome (IR Type) User Manual or 6128 6106 Accessories Power Adaptor Indoor IR Dome Outdoor IR Dome 5

Inhaltszusammenfassung zur Seite Nr. 7

5. NAME and FUNCTION of EACH PART 5.1 OSD Button (Menu): No. Name Function 1 UP Digital Zoom-Out or Up direction button 2 DOWN Digital Zoom-In or Down direction button 3 RIGHT Increase Value ( + + ) 4 Decrease Value (- - ) LEFT 5 ENTER Enter or Exit setup MENU To adjust the OSD, remove the dome cover from the main body by gently turning the cover counter-clockwise to unlock and pull free from the main body. The OSD buttons can be found on the main body of the dome camera.

Inhaltszusammenfassung zur Seite Nr. 8

6. INSTALLATION 6.1 Camera Installation & Operation 1. Removing the Dome Cover Remove the indoor dome cover from the main body by gently turning the cover counter-clockwise to unlock and pull free from the main body. Remove the outdoor dome cover using the provided L-Wrench, loosen the screws securing the temper-resistant housing cover (with the screws still attached on the cover) to unlock the cover from the main body. 2. Camera Image Adjustment You can adjust ca

Inhaltszusammenfassung zur Seite Nr. 9

Note: This product is not suitable for horizontal 360° continuous rotation. 3. Adjusting the Vari-Focal Lens Loosen the Zoom lever counter-clockwise several turns, and then rotate the Zoom lever to obtain the best image view. Loosen the Focus lever counter-clockwise several turns, and then rotate the Focus lever to obtain the optimum picture quality. Re-tighten the Zoom lever and Focus lever

Inhaltszusammenfassung zur Seite Nr. 10

4. Attaching the Dome Cover After all the necessary adjustments have been made, reinstall the dome cover to the main body. Reinstall the indoor dome cover and the main body by turning the dome clockwise until it locks into place To prevent any damage or theft, lock-up the dome by using the countersunk head screw. Reinstall the outdoor dome cover and the main body by using the provided L-Wrench to fasten the cover to the main body.

Inhaltszusammenfassung zur Seite Nr. 11

6.2 Connect to Monitor Connect the Video-out port of the camera to a monitor. Since the connecting method varies depending on the instrument, refer to the manual supplied with the instrument for more information. 10

Inhaltszusammenfassung zur Seite Nr. 12

6.3 Connect the Power Connect the indoor dome video output to a 75 Ohms type coaxial cable and the DC-Jack or AC/ DC-Terminator to the power source. Connect the outdoor dome video output to a 75 Ohms type coaxial cable and the DC-Jack or AC/ DC-Terminator to the power source. When using conduit cabling, it is suggested to use a metal to cover over the cables to prevent external damage. To weatherproof, place weatherproof adhesive tape (P.T.F.E. THREAD SEAL

Inhaltszusammenfassung zur Seite Nr. 13

Note: Power adapter is sold separately. 6.4 Connection Layout To connect the keyboard and alarm, please follow the setup guide shown below: 12

Inhaltszusammenfassung zur Seite Nr. 14

6.4.1 Connecting the Keyboard PELCO Keyboard (or compatible) Installation The RS-422 interface is used for communicating with a PELCO keyboard. Refer to Fig. 1; connect R+ of the camera to T+ of the PELCO keyboard. Connect R- of the camera to T- of the PELCO keyboard. panel keys or via remote commands. The user can adjust Camera ID via rear Protocol, Speed and Parity should only be adjusted via rear panel keys. Communication Setting 0 ~ 253 for P protoc