Inhaltszusammenfassung zur Seite Nr. 1
®
SUPER
SUPERSERVER 6015TC-T
SUPERSERVER 6015TC-10G
USER’S MANUAL
Revision 1.0a
Inhaltszusammenfassung zur Seite Nr. 2
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com. Super Micro Computer, Inc. ("Supermicro") reserves t
Inhaltszusammenfassung zur Seite Nr. 3
Preface Preface About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the SuperServer 6015TC- T/6015TC-10G. Installation and maintenance should be performed by experienced technicians only. The SuperServer 6015TC-T/6015TC-10G is a 1U Twin (two serverboards in a 1U chassis) rackmount server based on the SC808T-780 server chassis and two Super X7DCT/X7DCT-10G serverboards. X7DCT/X7DCT-10G sup
Inhaltszusammenfassung zur Seite Nr. 4
SUPERSERVER 6015TC-T/6015TC-10G User's Manual Chapter 4: System Safety You should thoroughly familiarize yourself with this chapter for a general overview of safety precautions that should be followed when installing and servicing the SuperServer 6015TC-T/6015TC-10G. Chapter 5: Advanced Serverboard Setup Chapter 5 provides detailed information on the X7DCT/X7DCT-10G serverboard, including the locations and functions of connectors, headers and jumpers. Refer to this chapter when adding o
Inhaltszusammenfassung zur Seite Nr. 5
Preface Notes v
Inhaltszusammenfassung zur Seite Nr. 6
SUPERSERVER 6015TC-T/6015TC-10G User's Manual Table of Contents Chapter 1 Introduction 1-1 Overview .........................................................................................................1-1 1-2 Serverboard Features .....................................................................................1-2 Processors ...................................................................................................... 1-2 Memory ....................................................
Inhaltszusammenfassung zur Seite Nr. 7
Table of Contents Installing the Inner Rails ................................................................................. 2-4 Installing the Outer Rails ................................................................................. 2-5 Locking Tabs .............................................................................................. 2-5 Installing the Server into the Rack .................................................................. 2-6 Installing the Server into a Telco Ra
Inhaltszusammenfassung zur Seite Nr. 8
SUPERSERVER 6015TC-T/6015TC-10G User's Manual 5-6 Installing Memory ............................................................................................5-8 5-7 Adding PCI Cards ........................................................................................... 5-9 5-8 Serverboard Details ......................................................................................5-10 X7DCT/X7DCT-10G Quick Reference ...........................................................5-11 5-9 Conn
Inhaltszusammenfassung zur Seite Nr. 9
Chapter 1: Introduction Chapter 1 Introduction 1-1 Overview The SuperServer 6015TC-T/6015TC-10G is a "1U Twin" server comprised of the SC808T-780 1U chassis and two (twin) X7DCT/X7DCT-10G serverboards. Please refer to our web site for information on operating systems that have been certifi ed for use with the 6015TC-T/6015TC-10G (www.supermicro.com). In addition to the serverboard and chassis, various hardware components may have been included with the 6015TC-T/6015TC-10G, as listed below. •
Inhaltszusammenfassung zur Seite Nr. 10
SUPERSERVER 6015TC-T/6015TC-10G User's Manual 1-2 Serverboard Features At the heart of the SuperServer 6015TC-T/6015TC-10G lies two X7DCT/X7DCT- 10G dual processor serverboards, which are based on Intel's 5100 chipset. Below are the main features of the X7DCT/X7DCT-10G. Note that the features on each board are doubled for the server. Processors Each X7DCT/X7DCT-10G supports dual Intel® Xeon® 5400/5300/5200/5100 Series processors. Please refer to our web site for a complete listing of supporte
Inhaltszusammenfassung zur Seite Nr. 11
Chapter 1: Introduction Onboard Controllers/Ports Onboard I/O backpanel ports on each serverboard include one COM port, a VGA port, two USB ports and two Gigabit LAN (NIC) ports. The 6015TC-10G (only) also has an Intel® 82598EB 10 Gb Ethernet controller with a CX4 interface. There are two sets of I/O ports included in the server (one set for each serverboard). ATI Graphics Controller The X7DCT/X7DCT-10G features an integrated ATI video controller based on the ES1000 graphics chip, which incl
Inhaltszusammenfassung zur Seite Nr. 12
SUPERSERVER 6015TC-T/6015TC-10G User's Manual PROCESSOR#1 PROCESSOR#2 0-3 0-2 1067/1333 1067/1333 0-1 MT/S MT/S PCI-EXP x16 Intel 5100 MCH 1-3 1-2 PCI-EXP x8 Oplin 1-1 82598 PCI-EXP x1 JLAN1 82573V PCI-EXP x1 ICH9R JLAN2 3.0 Gb/S 82573L USB 2.0 PCI 33MHz ATI VGA ES1000 CONN LPC GB LAN RJ45 SIO FWH GILGAL W83627GF RJ45 MS COM1 COM2 KB Figure 1-1. Intel 5100 Chipset: System Block Diagram Note: This is a general block diagram. Please see Chapter 5 for details. 1-4 PCI-E
Inhaltszusammenfassung zur Seite Nr. 13
Chapter 1: Introduction 1-3 Server Chassis Features The following is a general outline of the main features of the SC808T-780 1U chas- sis. Details on the chassis can be found in Chapter 6. System Power When confi gured as a SuperServer 6015TC-T/6015TC-10G, the SC808T-780 in- cludes a single 780W cold-swap power supply, which provides the power to both serverboards housed in the chassis. SATA Subsystem The SC808T-780 chassis was designed to support four SATA hard drives, which are hot-swappable
Inhaltszusammenfassung zur Seite Nr. 14
SUPERSERVER 6015TC-T/6015TC-10G User's Manual 1-4 1U Twin: System Notes As a 1U Twin confi guration, the 6015TC-T/6015TC-10G is a unique server system. With two system boards incorporated into a single chassis, there are several points you should keep in mind. System Power A single power supply is used to provide the power for both serverboards. Each serverboard however, can be shut down independently of the other with the power button on its own control panel. 2 Although they share a common
Inhaltszusammenfassung zur Seite Nr. 15
Chapter 1: Introduction 1-5 Contacting Supermicro Headquarters Address: Super Micro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (Technical Support) Web Site: www.supermicro.com Europe Address: Super Micro Computer B.V. Het Sterrenbeeld 28, 5215 ML 's-Hertogenbosch, The Netherlands Tel: +31 (0) 73-6400390 Fax: +31 (0) 73-6416525 Email: sales@supermicro.nl (Gener
Inhaltszusammenfassung zur Seite Nr. 16
SUPERSERVER 6015TC-T/6015TC-10G User's Manual Notes 1-8
Inhaltszusammenfassung zur Seite Nr. 17
Chapter 2: Server Installation Chapter 2 Server Installation 2-1 Overview This chapter provides a quick setup checklist to get your 6015TC-T/6015TC-10G up and running. Following these steps in the order given should enable you to have the system operational within a minimum amount of time. This quick setup assumes that your system has come to you with the processors and memory preinstalled. If your system is not already fully integrated with a serverboard, processors, system memory etc., p
Inhaltszusammenfassung zur Seite Nr. 18
SUPERSERVER 6015TC-T/6015TC-10G User's Manual • Leave approximately 30 inches of clearance in the back of the rack to allow for suffi cient airfl ow and ease in servicing. • This product is for installation only in a Restricted Access Location (dedicated equipment rooms, service closets and the like). • This product is not suitable for use with visual display work place devices accord- ing to §2 of the the German Ordinance for Work with Visual Display Units. Warnings and Precautions! ! ! Rack Pr
Inhaltszusammenfassung zur Seite Nr. 19
Chapter 2: Server Installation • Always keep the rack's front door and all panels and components on the servers closed when not servicing to maintain proper cooling. • Make sure all power and data cables are properly connected and not blocking the chassis airfl ow. See Chapter 5 for details on cable connections. Rack Mounting Considerations Ambient Operating Temperature If installed in a closed or multi-unit rack assembly, the ambient operating tempera- ture of the rack environment may be grea
Inhaltszusammenfassung zur Seite Nr. 20
SUPERSERVER 6015TC-T/6015TC-10G User's Manual 2-4 Installing the System into a Rack This section provides information on installing the 6015TC-T/6015TC-10G into a rack unit with the rack rails provided. If the system has already been mounted into a rack, you can skip ahead to Sections 2-5 and 2-6. There are a variety of rack units on the market, which may mean the assembly procedure will differ slightly. You should also refer to the installation instructions that came with the rack unit you
