Inhaltszusammenfassung zur Seite Nr. 1
QuickSpecs
HP ProLiant BL30p Server Blade
Overview
ProLiant BL30p Server Blades Installed in Server Blade Enclosure
1. ProLiant BL30p Server Blades (16)
2. ProLiant BL p-Class interconnects (2) (patch panel 2 shown)
What's New
ProLiant BL30p -- A new high density, dual-processor capable server blade for the ProLiant BL p-Class
An enhanced, fully backwards-compatible server blade enclosure featuring support for the new BL30p series server blades and all current
and future BL20p series and BL40p
Inhaltszusammenfassung zur Seite Nr. 2
QuickSpecs HP ProLiant BL30p Server Blade Overview At A Glance Maximum density ProLiant BL30p server blade Up to two Intel Xeon 3.2-GHz/533-MHz with 2MB L3 cache processors with Hyper-Threading Technology ServerWorks GC-LE chipset 1024-MB PC2100-MHz Registered ECC DDR memory (1 x 1-GB), expandable to 4-GB, flex memory supports interleaved and non- interleaved memory configurations Integrated Lights-Out (iLO) Advanced Pack with new static IP bay configuration feature Two (2) NC7781 PCI-X Gigabit
Inhaltszusammenfassung zur Seite Nr. 3
QuickSpecs HP ProLiant BL30p Server Blade Overview ProLiant BL30p Server Blade + ProLiant BL30p Blade Sleeve (holds 2 BL30p blades) + DA - 11958 North America — Version 6 — September 24, 2004 Page 3
Inhaltszusammenfassung zur Seite Nr. 4
QuickSpecs HP ProLiant BL30p Server Blade Overview BL p-Class Server Blade Enclosure with enhanced backplane components + OR Patch Panel (shown) or GbE Interconnect Switch (shown) or GbE2 Interconnect Switch Patch Panel 2 (fiber- or copper-based) BL p-Class Interconnects + BL p-Class power enclosure(s) and power supplies (three phase recommended) + OR Facility DC DA - 11958 North America — Version 6 — September 24, 2004 Page 4
Inhaltszusammenfassung zur Seite Nr. 5
QuickSpecs HP ProLiant BL30p Server Blade Overview OR OR Mini bus bars Scalable bus bars Bus boxes BL p-Class power distribution Configuration Steps For a complete ProLiant BL30p blade solution, do the following: 1. Select desired model, configuration and quantity of ProLiant BL30p server blades PLUS 2. Determine how many BL30p blade sleeves are required. Each BL30p blade sleeve holds two BL30p server blades and one server blade enclosure holds up to eight sleeves. PLUS 3. 3. Determine how many
Inhaltszusammenfassung zur Seite Nr. 6
QuickSpecs HP ProLiant BL30p Server Blade Overview RJ-45 Patch Panel (230766-B21) or BL p-Class C-GbE2 Interconnect Kit (with 12 RJ-45 10/100/1000 T/TX/T external ports) (283192-B21) with or without optional ProLiant BL p- Class GbE2 Storage Connectivity Kit (with 16 Fibre Channel connectors) (321745 -B21) (required for BL30p Fibre Channel connectivity when using the GbE2 Interconnect Switch) or BL p-Class F-GbE2 Interconnect (with 8 LC 1000 SX and 4 RJ-45 10/100/1000 T/TX/T external ports) (283
Inhaltszusammenfassung zur Seite Nr. 7
QuickSpecs HP ProLiant BL30p Server Blade Overview ProLiant BL p-Class Server Blade Enclosures with Enhanced Backplanes Installed in 42U Rack Redundant Power Configuration (left) and Non-Redundant Power Configurations (right) 1. Power Enclosure DA - 11958 North America — Version 6 — September 24, 2004 Page 7
Inhaltszusammenfassung zur Seite Nr. 8
QuickSpecs HP ProLiant BL30p Server Blade Standard Features (Server Blade) Processor Intel Xeon Processor 3.2-GHz/533-MHz with 2MB L3 cache Intel Xeon Processor 3.2-GHz/533-MHz with 1MB L3 cache Intel Xeon Processor 3.06-GHz/533-MHz with 512KB L2 cache Upgradeability BL30p Server Blade is dual-processor capable Cache Memory 2-MB Level 3 cache One of the following 1-MB Level 3 cache depending on Model 512-KB Level 2 cache Chipset ServerWorks GC-LE chipset NOTE: For more information regarding the
Inhaltszusammenfassung zur Seite Nr. 9
QuickSpecs HP ProLiant BL30p Server Blade Standard Features (Server Blade) Fiber Channel on the The following items are needed to connect the ProLiant BL30p to a SAN via Fibre Channel: ProLiant BL30p 1. ProLiant BL30p blade with Dual-Port Fibre Channel Adapter (option) installed The Dual-Port Fibre Channel Adapter option 354054-B21 is compatible with the ProLiant BL30p blade (not compatible with ProLiant BL20p series blades) Two ports on each configured blade provide redundant Fibre Channel co
Inhaltszusammenfassung zur Seite Nr. 10
QuickSpecs HP ProLiant BL30p Server Blade Standard Features (Server Blade Enclosure and Interconnects) ProLiant BL p-Class Server Blade Enclosure and Interconnects ProLiant BL p-Class 6U (10.5-inch), 19-inch wide Server Blade Enclosure Holds up to: Eight (8) ProLiant BL20p series server blades Sixteen (16) ProLiant BL30p series server blades (BL30p blade sleeves required) Two (2) ProLiant BL40p series server blades A combination of the above NOTE: ProLiant BL p-Class server blade enclosures with
Inhaltszusammenfassung zur Seite Nr. 11
QuickSpecs HP ProLiant BL30p Server Blade Standard Features (Server Blade Enclosure and Interconnects) ProLiant BL p-Class Interconnect Switch interconnects consolidate the Ethernet signals from the server blades to a smaller set of Interconnect Switch external copper-based or fiber-based uplink ports for connection to the network infrastructure. Like the Patch Panel Option interconnects, an option is also available to pass through individual BL20p G2 and BL30p Fibre Channel signals. The interc
Inhaltszusammenfassung zur Seite Nr. 12
QuickSpecs HP ProLiant BL30p Server Blade Standard Features (Server Blade Enclosure and Interconnects) ProLiant BL p-Class GbE2 The GbE2 Storage Connectivity Kit (option) is required for Fibre Channel signal pass-through when using a GbE2 Storage Connectivity Kit Interconnect Switch Kit. Both Ethernet cable consolidation and Fibre Channel connectivity is possible using a single Option interconnect option. Order one GbE2 Storage Connectivity Kit per server blade enclosure for Fibre Channel pass (
Inhaltszusammenfassung zur Seite Nr. 13
QuickSpecs HP ProLiant BL30p Server Blade Standard Features (Server Blade Enclosure and Interconnects) Required Network Cabling 10Base-T Categories 3, 4 or 5 UTP (100 meters) EIA/TIA-568 100-ohm STP (100 meters) 100Base-TX Category 5 UTP (100 meters) EIA/TIA-568 100-ohm STP (100 meters) 1000Base-T Category 5 UTP (100 meters) EIA/TIA-568 100-ohm STP (100 meters) 1000Base-SX 50/125 µm Multimode Fiber, 400 MHz/Km (500 meters) 50/125 µm Multimode Fiber, 500 MHz/Km (550 meters) 62.5/125 µm Multimode
Inhaltszusammenfassung zur Seite Nr. 14
QuickSpecs HP ProLiant BL30p Server Blade Standard Features (Power System and Rack Information) ProLiant BL p-Class NOTE: To determine power configuration, please refer to the ProLiant BL p-Class Overview and Planning Whitepaper Power System and and sizing utility at http://www.hp.com/products/servers/proliant-bl/p-class/info/. Rack Information ProLiant BL p-Class 3U (5.25-inch), 19-inch wide, 29-inch deep (0.48-meter wide, 0.74-meter deep), dual input single phase and three Power Enclosure phas
Inhaltszusammenfassung zur Seite Nr. 15
QuickSpecs HP ProLiant BL30p Server Blade Standard Features (Manageability) ProLiant Essentials ProLiant Essentials Rapid Rapid Deployment Pack (RDP) is an automated deployment and provisioning solution Foundation Pack Deployment Pack for all ProLiant servers. RDP includes the Altiris Deployment Solution and ProLiant Software for the ProLiant Integration Module featuring ProLiant server pre-configured events for OS installation, BL Server and optimized software drivers, firmware and management a
Inhaltszusammenfassung zur Seite Nr. 16
QuickSpecs HP ProLiant BL30p Server Blade Standard Features (Manageability) SmartStart SmartStart is a tool that simplifies single server setup, providing a rapid way to deploy reliable and consistent server configurations. SmartStart 7.00 and later can now deploy the ProLiant BL20P G3 and ProLiant BL40P servers, using the I/O port with an attached USB CD-ROM device. To obtain a copy of SmartStart for your blade server, redeem the coupon that is included with your Blade server or order your copy
Inhaltszusammenfassung zur Seite Nr. 17
QuickSpecs HP ProLiant BL30p Server Blade Standard Features (Manageability) ProLiant BL p-Class Power redundancy: Availability Features hot-plug power supplies redundant AC feeds (requires two power enclosures when using blade enclosures with enhanced backplane components) interconnects options and server blade management module share power from both A- and B- side power buses Dual-Port Fibre Channel Mezzanine Card for redundant SAN connections Redundant ROM on each server blade ECC Memory Netwo
Inhaltszusammenfassung zur Seite Nr. 18
QuickSpecs HP ProLiant BL30p Server Blade Standard Features (Manageability) Rack Airflow HP 10000 series racks provide enhanced airflow for maximum cooling, allowing racks to be fully loaded with Requirements servers and server blades using the latest server technologies. CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment: Front and rear doors: If your 42U server rack includes closing front a
Inhaltszusammenfassung zur Seite Nr. 19
QuickSpecs HP ProLiant BL30p Server Blade Models ProLiant BL30p X3.2-2MB, Processor(s) Two (2) Intel Xeon 3.2-GHz standard (up to 2 supported) 1GB (2P) Cache Memory 2-MB Level 3 writeback per processor 360329-B21 Memory 1024-MB (standard) to 4-GB (maximum) of PC2100 DDR SDRAM running at 266-MHz (1 x 1-GB); 2-way interleaved when an identical pair installed Network Adapter Two (2) NC7781 PCI-X Gigabit NICs (embedded) with WOL and PXE One (1) 10/100T NIC (embedded) dedicated to iLO management Hard
Inhaltszusammenfassung zur Seite Nr. 20
QuickSpecs HP ProLiant BL30p Server Blade Models ProLiant BL30p Processor(s) One (1) Intel Xeon 3.06-GHz standard (up to 2 supported) X3.06/533MHz-512KB, 1GB Cache Memory 512-KB Level 2 writeback per processor (1P) Memory 1024-MB (standard) to 4-GB (maximum) of PC2100 DDR SDRAM running at 266-MHz 354050-B21 (1 x 1-GB), 2-way interleaved when an identical pair installed Network Adapter Two (2) NC7781 PCI-X Gigabit NICs (embedded) with WOL and PXE One (1) 10/100T NIC (embedded) dedicated to iLO ma
