Inhaltszusammenfassung zur Seite Nr. 1
AXIS 2420
AXIS 2420 W/Lens
Network Camera
User’s Manual
Inhaltszusammenfassung zur Seite Nr. 2
2 AXIS 2420 User’s Manual Liability About This Document This manual is intended for administrators and users of the Every care has been taken in the preparation of this manual. If AXIS 2420 and the AXIS 2420 W/Lens Network Camera, you detect any inaccuracies or omissions, please inform your and is applicable for software release 2.31. Both products local Axis office. Axis Communications AB cannot be held are referred to throughout as the AXIS 2420. responsible for any technical or typograp
Inhaltszusammenfassung zur Seite Nr. 3
AXIS 2420 User’s Manual Table of Contents 3 Table of Contents An Introduction to the AXIS 2420. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Camera Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 4
Deutsch AXIS 2420 User’s Manual 4 Deutsch Physische Beschreibung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Bedienfeld vorn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Bedienfeld hinten . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Montage der AXIS 2420 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 5
AXIS 2420 User’s Manual An Introduction to the AXIS 2420 5 An Introduction to the AXIS 2420 Camera Models The AXIS 2420 Network Camera is available in 4 different variants: The AXIS 2420 (PAL) - supplied without a lens. The AXIS 2420 W/Lens (PAL) - supplied with a DC-Iris varifocal lens. The AXIS 2420 (NTSC) - supplied without a lens. The AXIS 2420 W/Lens (NTSC) - supplied with a DC-Iris varifocal lens. This information provided in this manual is applicable to all variants, unless
Inhaltszusammenfassung zur Seite Nr. 6
An Introduction to the AXIS 2420 AXIS 2420 User’s Manual 6 To simplify the installation process, the Web-based interface provides an Installation Wizard and an Application Wizard, which help you towards a seamless and automated integration into your networking and application environments. Including a video output via a standard BNC connector, the AXIS 2420 also connects directly to any analog CCTV system to provide instant Plug-and-Watch integration into two parallel imaging networks -
Inhaltszusammenfassung zur Seite Nr. 7
AXIS 2420 User’s Manual An Introduction to the AXIS 2420 7 Outdoor Use - The AXIS 2420 is a professional product including full DC-iris control and is shipped either without a lens (AXIS 2420) or with a DC-Iris varifocal lens (AXIS 2420 W/Lens). Both variants can alternatively be fitted with any standard C-CS type lens. Installed into an appropriate outdoor housing, the camera makes an ideal remote monitoring tool for outdoor use. Follow the accessories links for information on appropria
Inhaltszusammenfassung zur Seite Nr. 8
An Introduction to the AXIS 2420 AXIS 2420 User’s Manual 8 Modem Support - The Point to Point Protocol (PPP) support allows you to use your AXIS 2420 remotely over a serial link, just as if it were located on your local network. You can initially set up the AXIS 2420 over the network, or use a computer connected directly to the AXIS 2420 via the supplied Null Modem cable. The AXIS 2420 is accessed using a standard Dial-up (PPP) connection. ISP Support - Arrange for the image files to be u
Inhaltszusammenfassung zur Seite Nr. 9
AXIS 2420 User’s Manual Physical Description 9 Physical Description Please read the following information to familiarize yourself with your AXIS 2420, making particular note of where the connectors and indicators are located. This section provides a useful reference when installing the product. Front Panel Status Indicator Used in conjunction with the Focus Assistant, this multi-colored indicator can be used as a local focusing aid (see Focusing Your Camera, on page 17). Under normal condi
Inhaltszusammenfassung zur Seite Nr. 10
Physical Description AXIS 2420 User’s Manual 10 Rear Panel Network Connector RS-232 Serial Connector I/O-A Connector The AXIS 2420 is designed for A single 9-pin D-sub connec- Provides the physical interface to a single 10 Mbps Ethernet and 100 tor provides the RS-232 serial digital photo-coupled input that is used Mbps Fast Ethernet networks interface for connecting a for connecting a variety of external alarm and connects to the network modem or the AXIS 2191 devices to the AXIS 2420
Inhaltszusammenfassung zur Seite Nr. 11
AXIS 2420 User’s Manual Checking The Hardware Inventory 11 Mounting the AXIS 2420 The AXIS 2420 is supplied without a mounting assembly. Screw holes for attaching the camera to an assembly are provided on both the top and bottom surfaces of the unit, for easy installation on a wall or from a ceiling. The screw hole has an internal dimension of 1/4" UNC. Screw holes on top and base. The AXIS 2420 is also suitable for outdoor use, but it must be mounted in a weatherproof enclosure and must b
Inhaltszusammenfassung zur Seite Nr. 12
Installing on a Network AXIS 2420 User’s Manual 12 Installing on a Network Macintosh users - Please refer to Notes for Macintosh Users, on page 53. Easy installation - Use The AXIS IP Installer. See Using the AXIS IP Installer, on page 52. Quick installation - Follow the instructions below to install the AXIS 2420 on an Ethernet network. ❶ Fit or replace a lens (if required). The lens is fitted by turning it in a clockwise direction. ❷ Note the Serial number on the underside of the uni
Inhaltszusammenfassung zur Seite Nr. 13
AXIS 2420 User’s Manual Installing on a Network 13 ❺ Attach the external Power Supply to the unit and connect it to your local mains supply. ❻ Approximately 10-15 seconds after connecting the power supply, the message Reply from 172.21.1.200...’ - or similar, is returned in the DOS/command window. Ensure that the Power Indicator is permanently lit and that the Net- Power Supply work Indicator flashes intermittently. Connector ❼ Exit ping. The installation is complete, and you are now ready t
Inhaltszusammenfassung zur Seite Nr. 14
Installing via a Modem AXIS 2420 User’s Manual 14 Installing via a Modem The information in this section describes how to connect the AXIS 2420 to a serial modem for transmitting images over a dial-up connection. Important! Although instructions for configuring the AXIS 2420 using a null modem cable are provided below, it is recommended that (if possible) the unit is initially installed and configured over a network. The information and screen examples featured within this section are s
Inhaltszusammenfassung zur Seite Nr. 15
AXIS 2420 User’s Manual Installing via a Modem 15 Creating a Dial-Up Networking Connection Follow the steps below to create a dedicated Dial-Up networking connection to your product: ❶ Double-click My Computer and then double-click the Dial-Up Networking icon. ❷ Double-click the Make New Connection icon. ❸ Provide the connection with a name (AxisCamera is the name used in these examples). ❹ From the drop-down list, select the Standard Modem previously created for the AXIS 2420. Click Configur
Inhaltszusammenfassung zur Seite Nr. 16
Installing via a Modem AXIS 2420 User’s Manual 16 Refining the Dial-Up Networking Properties Having created the Dial-Up connection for your AXIS 2420, follow the steps below to refine the connection properties: ❺ Click TCP/IP settings and then check ❶ From the Dial-Up Networking dialog, right-click the the Server assigned IP address, and dedicated Dial-Up connection previously created for your Server assigned name server addresses AXIS 2420 (AxisCamera in this example). Select Properties. ra
Inhaltszusammenfassung zur Seite Nr. 17
AXIS 2420 User’s Manual Focusing Your Camera 17 Verifying the Modem Connection and Completing the Installation Having initiated your Dial-Up connection, as described above, you can quickly test the connection by accessing the AXIS 2420 from a standard browser, such as Netscape or Internet Explorer, as follows: abc.xyz ❶ Since the AXIS 2420 emulates a DNS server, you can type in any URL containing a period in the address field of your browser to display the AXIS 2420 Home Page, as shown here
Inhaltszusammenfassung zur Seite Nr. 18
Configuring Your Camera AXIS 2420 User’s Manual 18 Configuring Your Camera Before you begin: Successful installation of the product is prerequisite to configuring the unit. You should therefore read the following information before commencing with this section: Installing on a Network, on page 12, or Installing via a Modem, on page 14, and then Choosing Your Application, on page 31. Important! Javascript must be enabled in your browser for the AXIS 2420 Web-based interface to work. After
Inhaltszusammenfassung zur Seite Nr. 19
AXIS 2420 User’s Manual Configuring Your Camera 19 The Installation Wizard The Installation Wizard provides a quick and easy way of defining the basic settings for your installation - as explained in the Administration Tools Overview, on page 21. Using the Installation Wizard 1. Start the Installation Wizard from the product’s Home Page or from the administration tools page. 2. Click Start>. Follow the instructions to complete the configuration. 3. Click the Finish button to save the settin
Inhaltszusammenfassung zur Seite Nr. 20
Configuring Your Camera AXIS 2420 User’s Manual 20 The Administration Tools Whether you are viewing images directly over the network, or transmitting images over a modem, you can use the Web-based Administration Tools for configuring and managing your AXIS 2420 at any time. After initially setting up the AXIS 2420 with the Installation Wizard, these tools are ideal for more advanced users. Accessing the Tools Follow the instructions below to access the Administration Tools using a browser:
