Bedienungsanleitung Bosch Appliances VDC-260

Inhaltszusammenfassung zur Seite Nr. 1

Dome Camera Menus
VDC-250 / VDC-260 / VDC-240 / VDN-240 / VDI-240
en Quick Operation Guide

Inhaltszusammenfassung zur Seite Nr. 2

Inhaltszusammenfassung zur Seite Nr. 3

Advantage Line Dome Cameras Camera menus | en 3 1 Camera menus Press the center button of the control pad to access the SETUP menu. – Use the up and down buttons to move the cursor to a submenu – Use the right and left buttons to change values. – Press the center button to select an item (or exit). 1.1 Main menu LENS WHITE BAL AGC DAY/NIGHT IMAGE ADJ GENERAL INITIAL* EXIT * If menu is changed, INITIAL is hidden. Bosch Security Systems Quick Operation Manual AM18-Q0627 | v1.0 | 2012.06

Inhaltszusammenfassung zur Seite Nr. 4

4 en | Camera menus Advantage Line Dome Cameras 1.1.1 Lens menu ESC BRIGHTNESS 0~20 FLICKERLESS ON, OFF DC DC LEVEL 0~20 FLICKERLESS ON, OFF SHUTTER* 1/60 (50), 1/120 LENS (100), 1/250, 1/500, 1/700, 1/1K1/1600, 1/2500, 1/5K, 1/7K, 1/10K, 1/30K, 1/60K, 1/120K (sec) * Flickerless mode must be off to select the shutter speed. IR camera LENS DC DC LEVEL 0~5 SHUTTER IR mode: 1/60 (50) Color, B/W mode: 1/60 (50), 1/120 (100), 1/250, 1/500, 1/700, 1/1K1/1600, 1/2500, 1/5K, 1/7K, 1/10K, 1/30K

Inhaltszusammenfassung zur Seite Nr. 5

Advantage Line Dome Cameras Camera menus | en 5 1.1.2 White balance menu WHITE ATW BAL MANUAL RED 0~160 BLUE 0~160 PUSH* * Select PUSH to change the color temperature. Bosch Security Systems Quick Operation Manual AM18-Q0627 | v1.0 | 2012.06

Inhaltszusammenfassung zur Seite Nr. 6

6 en | Camera menus Advantage Line Dome Cameras 1.1.3 AGC (Automatic Gain Control) menu AGC ON LEVEL 0~20 OFF AM18-Q0627 | v1.0 | 2012.06 Quick Operation Manual Bosch Security Systems

Inhaltszusammenfassung zur Seite Nr. 7

Advantage Line Dome Cameras Camera menus | en 7 1.1.4 Day/night menu DAY/ COLOR NIGHT B/W BURST OFF, ON AUTO* DELAY TIME 1-15 D/N LEVEL LOW, MIDDLE, HIGH *In auto mode using external IR may cause flicker. The approximate levels for day/night switching are: Low Middle High VDC-250/260 Day to night 0.15 lx 0.3 lx 0.6 lx Night to day 1.0 lx 1.8 lx 2.5 lx VDC-240 Day to night 0.5 lx 1.0 lx 1.5 lx Night to day 2.0 lx 2.5 lx 3.0 lx VDN-240 Day to night 0.2 lx 0.5 lx 0.10 lx Night to day 1.0 lx 1.8 lx

Inhaltszusammenfassung zur Seite Nr. 8

8 en | Camera menus Advantage Line Dome Cameras 1.1.5 Image adjustment menu SBLC OFF, LOW, MIDDLE, HIGH DNR OFF, LOW, MIDDLE, HIGH SHARP. LEVEL 0~20 MIRROR ON, OFF MOTIONAREA 1-4 DISPLAY OFF, ON SENSITIVITY 1(most)-24 (least) TOP 8-126 BOTTOM 8-126 LEFT 4-191 RIGHT 4-191 INITIAL OFF, ON RETURN IMAGE ADJ PRIVACYAREA 1-4 DISPLAY OFF, ON COLOR WHITE, YELLOW, GREEN, BLUE, RED BLACK, GRAY TOP 4-63 BOTTOM 5-64 LEFT 18-205 RIGHT 19-206 INITIAL OFF, ON (factory default) RETURN COLOR R-Y 0-20 G

Inhaltszusammenfassung zur Seite Nr. 9

Advantage Line Dome Cameras Camera menus | en 9 Area selection for motion or privacy masks Select area 1, 2, 3 or 4. – Top: extend or reduce the upper limit of the detection area. – Bottom: extend or reduce the bottom limit of the detection area. – Left: extend or reduce the left limit of the detection area. – Right: extend or reduce the right limit of the detection area. TOP reduce RIGHT extend LEFT RIGHT 1 1 BOTTOM Bosch Security Systems Quick Operation Manual AM18-Q0627 | v1.0 | 2012.06

Inhaltszusammenfassung zur Seite Nr. 10

10 en | Camera menus Advantage Line Dome Cameras 1.1.6 General menu CAM ID 000~255 ID DISPLAY OFF, ON CAM TITLE OFF ON UP/DN*, LE/RI** LANG. ENG, CHIN SYNC. INT, L/L (24 VAC L/L phase adjust GENERAL only) 0~356 BAUD. 2400, 4800, 9600, 57600 VERSION INITIAL OFF, ON (factory default) RETURN * up/down: character select. ** left/right: position select. AM18-Q0627 | v1.0 | 2012.06 Quick Operation Manual Bosch Security Systems

Inhaltszusammenfassung zur Seite Nr. 11

Inhaltszusammenfassung zur Seite Nr. 12

Bosch Security Systems www.boschsecurity.com © Bosch Security Systems, 2012