Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
Product name: Wireless Network Camera (IP3137) Release Date: 2005/05/20 Manual Revision: 1.0 Web site: www.vivotek.com Email: technical@vivotek.com sales@vivotek.com Made in Taiwan. ©Copyright 2000-2005. All rights reserved - 1 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532
Inhaltszusammenfassung zur Seite Nr. 3
Before You Use This Product The use of surveillance devices may be prohibited by law in your country. The Network Camera is not only a high-performance web-ready camera but also can be part of a flexible surveillance system. It is the user’s responsibility to ensure that the operation of such devices is legal before installing this unit for its intended use. It is important to first verify that all contents received are complete according to the list in the "Package Content
Inhaltszusammenfassung zur Seite Nr. 4
Table of Contents Before You Use This Product......................................................................2 Package Contents....................................................................................6 Installation.............................................................................................7 Hardware installation..........................................................................7 Software installation....................................
Inhaltszusammenfassung zur Seite Nr. 5
Mail & FTP....................................................................................... 38 SMTP........................................................................................ 38 FTP .......................................................................................... 38 DDNS and UPnP settings................................................................... 40 Video codec parameters.................................................................... 40
Inhaltszusammenfassung zur Seite Nr. 6
Application configuration URL ....................................................... 61 Homepage layout configuration URL .............................................. 62 D. Technical specifications ................................................................. 63 - 5 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532
Inhaltszusammenfassung zur Seite Nr. 7
Package Contents IP3137 Software CD Antenna Quick installation guide Power adapter Warranty card Camera stand - 6 - www.vivotek.com T: 886-2-82455282 F: 886-2-82455532
Inhaltszusammenfassung zur Seite Nr. 8
Installation In this manual, "User" refers to whoever has access to the Network Camera, and "Administrator" refers to the person who can configure the Network Camera and grant user access to the camera. Hardware installation Please verify that your product package contains all the accessories listed in the foregoing Package Contents. Depending on the user’s application, an Ethernet cable may be needed. The Ethernet cable should meet the specs of UTP Category 5 and not exce
Inhaltszusammenfassung zur Seite Nr. 9
To install in Ethernet Make sure the Ethernet is firmly connected to a switch hub. After attaching the Ethernet cable plug in the power adapter. If the LED turns out to be steady blue after self-test, go to next paragraph “Software installation”. If the Ethernet is not available, Network Camera will switch to wireless LAN mode. To install in wireless LAN If the Ethernet is not available while power on, the Network Camera will search for any access point with the SSID “defau
Inhaltszusammenfassung zur Seite Nr. 10
Once installation is complete, the Administrator should proceed to the next section "Initial access to the Network Camera" for necessary checks and configurations. Initial Access to the Network Camera Check Network Settings The Network Camera can be connected either before or immediately after software installation onto the Local Area Network. The Administrator should complete the network settings on the configuration page, including the correct subnet mask and IP address o
Inhaltszusammenfassung zur Seite Nr. 11
only option is to restore to the original factory default settings. How to Use Authentication After opening the Web browser and typing in the URL of the Network Camera, a dialogue window pops up to request a username and password. Upon successful authentication, the following figure is displayed. The foreground is the login window and the background shows the message if authentication fails. The user may check the option box to save the password for future convenience. T
Inhaltszusammenfassung zur Seite Nr. 12
Installing plug-in For the initial access to the Network Camera in Windows, the web browser may prompt for permission to install a new plug-in for the Network Camera. Permission request depends on the Internet security settings of the user’s PC or notebook. If the highest security level is set, the computer may prohibit any installation and execution attempt. This plug-in has been registered for certificate and is used to display the video in the browser. Users may click on t
Inhaltszusammenfassung zur Seite Nr. 13
Primary user’s capability Main Screen with Camera View The main page layout has two parts: Configuration functions: The camera can be configured using these user interfaces. Camera View: What the camera sees. Click on the configuration link to the left of the image window to enter the configuration page. - 12 - www.vivotek.com
Inhaltszusammenfassung zur Seite Nr. 14
Digital Zoom Click on the magnifier icon under the camera view then the digital zoom control panel will be shown. Uncheck “Disable digital zoom” and use the slider control to change the zoom factors. - 13 - www.vivotek.com
Inhaltszusammenfassung zur Seite Nr. 15
Snapshot Click on “Snapshot”, web browser will pop up a new window to show the snapshot. Users can point at the snapshot and click the right button of mouse to save it. Client settings At the initial access to the “Connection type” page in Windows, the web browser will ask for a new plug-in installation, the plug-in being the Network Camera. This plug-in has been registered for certification and can be used to change the parameters at the client’s site. The user may cli
Inhaltszusammenfassung zur Seite Nr. 16
lower the security level or contact your IT or networking supervisor. There are two settings for the client side. One is “Media Option” for users to determine if audio should be muted. The other is “Protocol Option” which allows choices on connection protocol between client and server. There are three protocols choices to optimize your usage - UDP, TCP and HTTP. The UDP protocol allows for more real-time audio and video streams. However, some pack
Inhaltszusammenfassung zur Seite Nr. 17
to re-connect. http:///protocol.html is the domain name or the original IP address of the Network Camera. - 16 - www.vivotek.com
Inhaltszusammenfassung zur Seite Nr. 18
Administrator’s capability Fine-tuning for Best Performance Best performance generally equates to the fastest image refresh rate with the best video quality, and at the lowest network bandwidth as possible. The three factors, “Maximum frame rate”, “Fix bit rate”, and “Fix quality” on the Video Configuration page, are correlative to allow for achieving the best performance possible. For Best Real-time Video Images To achieve good real-time visual effect, the network ban
Inhaltszusammenfassung zur Seite Nr. 19
and set the maximum frame rate to 30 fps. If the images vary dramatically in your environment, you may want to slow the maximum frame rate down to 20 fps in order to lower the rate of data transmission. This allows for better video quality and the human eyes cannot readily detect the differences between those of 20, 25, or 30 frames per second. If your network bandwidth is below 384 Kbps, set the “Fix bit rate” according to your bandwidth and try to get the best performance by
Inhaltszusammenfassung zur Seite Nr. 20
Opening accounts for new users Protect Network Camera by passwords The Network Camera is shipped without any password by default. That means everyone can access the Network Camera including the configuration as long as the IP address is known. It is necessary to assign a password if the Network Camera is 1 intended to be accessed by others. Type a new word twice in to enable protection. This password is used to identify the administrator. Then add an account with user 2 na
