Inhaltszusammenfassung zur Seite Nr. 1
NETWORK CAMERA
Model:
IK-WB16A / IK-WB16A-W
User's Manual
IK-WB16A IK-WB16A-W
For information on our latest products and peripheral devices, refer to the
following Website:
http://www.toshibasecurity.com
If the URL changes, refer to the Toshiba website (http://www.toshiba.com/).
Inhaltszusammenfassung zur Seite Nr. 2
Table of Contents Introduction ������������������������������������������������������������������������������������������������������������������������������������������������������������������ 4 Important Safeguards �������������������������������������������������������������������������������������������������������������������������������������������������� 6 Important Safeguards (Cont) � �
Inhaltszusammenfassung zur Seite Nr. 3
Troubleshooting ������������������������������������������������������������������������������������������������������������������������������������������������������� 109 Reboot and restore ............................................................................................................................................. 109 Audio .............................................................................................................................................................
Inhaltszusammenfassung zur Seite Nr. 4
Introduction FCC (USA)-INFORMATION NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However
Inhaltszusammenfassung zur Seite Nr. 5
Thank you for purchasing the IK-WB16A/IK-WB16A-W Network Camera. Before you start using the camera, read this User's Manual carefully to ensure correct usage. Once you have finished reading this User's Manual, keep it in a convenient place for future reference. The design, specifications, software, and User's Manual contents are subject to change without prior notice. Terms and Trademarks ● The term "OS" is used in this User's Manual to indicate operating systems compatible with this product
Inhaltszusammenfassung zur Seite Nr. 6
Important Safeguards 1. Read Instructions Read all the safety and operating instructions before operating the product. 2. Retain Instructions Retain the safety instructions and user's manual for future reference. 3. Warnings Comply with all warnings on the product and in the user's manual. 4. Follow Instructions Follow all operating and use instructions. 5. Cleaning Disconnect this video product from the power supply before cleaning. 6. Attachments Do not use attachments not recommended by the v
Inhaltszusammenfassung zur Seite Nr. 7
13. Lightning For additional protection on this video product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the power supply and cable system. This will prevent damage to the video product due to lightning and power-line surges. If lightning occurs, do not touch the unit or any connected cables in order to avoid electric shock. 14. Overloading Do not overload the power supply or extension cords as th
Inhaltszusammenfassung zur Seite Nr. 8
20. When using a wireless LAN function (IK-WB16A-W): • Do not use near people with heart pacemakers. • Do not use near electronic medical equipment, or in hospitals or other medical institutions. • Do not use inside aircraft or in places where the wireless LAN function could interfere with electromagnetic signals. The electromagnetic interference could cause a malfunction, resulting in an accident. 21. If the use of a wireless LAN function interferes with another device’s electromagnetic signa
Inhaltszusammenfassung zur Seite Nr. 9
Important Safeguards (Cont.) CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral t
Inhaltszusammenfassung zur Seite Nr. 10
Notes on Use and Installation ● Do not aim the camera at the sun Never aim the camera at the sun even with the camera power off. ● Do not shoot intense light Intense light such as a spotlight may cause a bloom or smear. A vertical stripe may appear on the screen. However, this is not a malfunction. ● Treat the camera with care Dropping or subjecting the camera to intense vibration may cause it to malfunction. ● Avoid Volatile Liquid Do not use volatile liquids, such as an insect spray, near
Inhaltszusammenfassung zur Seite Nr. 11
Precautions for Use Disclaimer We disclaim any responsibility and shall be held harmless for any damages or losses incurred by the user in any of the following cases: 1. Fire, earthquake or any other act of God; acts by third parties; misuse by the user, whether intentional or accidental; use under extreme operating conditions. 2. Malfunction or non-function resulting in indirect, additional or consequential damages, including but not limited to loss of expected income and suspension of busin
Inhaltszusammenfassung zur Seite Nr. 12
Wireless LAN and Your Health Wireless LAN products, like other radio devices, emit radio frequency electromagnetic energy. The level of energy emitted by Wireless LAN devices however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones. Because Wireless LAN products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Wireless LAN is safe for use by consumers. These standards and r
Inhaltszusammenfassung zur Seite Nr. 13
AC Adapter Be sure to use only the supplied AC adapter. Using a different AC adapter may cause the camera to malfunction, heat up, or catch fire. Before using the AC adapter, carefully read and observe the Important Safeguards ( → page 5) and the notes below. ● Plug the AC adapter into the 100-240V AC outlet. If inserting it into other than 100-240V AC outlet, it may result in electric shock or fire hazard. ● Do not repair, modify or disassemble the AC adapter. It may result in electric shock
Inhaltszusammenfassung zur Seite Nr. 14
Specifications AC adapter (DSA-20P-10) Power source : 100-240V AC 50/60 Hz Rated output : 12V DC, 1.5 A Ambient temperature guaranteed for performance : 32°F to 104°F (0°C to 40°C) Storage temperature : -4°F to 140°F (-20°C to 60°C) Maximum external dimensions : 1.42 x 1.85 x 2.93 inches (36 x 47 x 74.5 mm) (width x height x depth) Cord length : 72 inches (1828 mm) 14
Inhaltszusammenfassung zur Seite Nr. 15
Package Contents IK-WB16A/IK-WB16A-W AC Adapter l l Cord length: 72 inches (1828 mm) Back Cover l Antenna (IK-WB16A-W only) l Ceiling Mount Brackets / Alignment sticker IK-WB16A / IK-WB16A-W Alignment Sticker Drill hole Drill hole Drill hole (Drill hole) A B l Screws / LAN cable and RJ45 Female/ l Quick Start Guide and Important Female Coupler Safeguards NETWORK CAMERA Model: IK-WB16A / IK-WB16A-W Quick Start Guide and Important Safeguards This guide describes the hardware installation. IK-
Inhaltszusammenfassung zur Seite Nr. 16
Physical Description Front Panel Status LED Built-in Microphone Lens Back Panel Ethernet 10/100 RJ45 Socket Audio Out Cable Clip Microphone In MicroSD/SDHC Card Slot General I/O Terminal Block microSD WPS/RESET 4 3 2 1 WPS/Reset Button Power Cord Socket Antenna (IK-WB16A-W only) General I/O Terminal Block This Network Camera provides a general I/O terminal block which is used to connect external input / output devices. The pin definitions are described below. 4 3 2 1 When you connect Pin Name
Inhaltszusammenfassung zur Seite Nr. 17
The diagrams below apply when "Digital Input" is used for an alarm input. Status LED The LED indicates the status of the Network Camera. Item LED status Description Steady Red Power on and system booting 1 Red LED unlit Power off Steady Red + Blinking Green every 1 sec. Network connected (heartbeat) 2 Steady Red + Green LED unlit Network disconnected 3 Steady Red + Blinking Green every 2 sec. Audio mute (heartbeat) 4 Blinking Red every 0.15 sec. + Blinking Green every 1 sec. Upgrading Firmware 5
Inhaltszusammenfassung zur Seite Nr. 18
WPS/Reset This button is used dual purposes. microSD WPS/RESET WPS/Reset 4 3 2 1 Button WPS: (IK-WB16A-W only) Push the WPS button of your wireless access point. Press and release the WPS recessed button on the back of the camera using a paper clip or small object. The ESSID and encrypted key of the wireless access point will be sent to the camera and the wireless LAN settings are complete. The reset button is used to reset the system or restore the factory default settings. Occasionally,
Inhaltszusammenfassung zur Seite Nr. 19
PARTITION LINK RECEIVE POWER COLLISION 1 2 3 4 5 Installation Hardware Installation Please verify that your product package contains all the accessories listed in the Package Contents listed on page 13. Depending on the user’s application, an Ethernet cable may be needed. The Ethernet cable should meet the specs of UTP Category 5. Hardware Installation is shown in the Quick Start Guide(QSG). Please refer to page 15 of the QSG. Network Deployment In this user’s manua
Inhaltszusammenfassung zur Seite Nr. 20
2. In this case, if the Local Area Network (LAN) IP address of your Network Camera is 192.168.0.3, please forward the following ports for the Network Camera on the router. ■ HTTP port ■ RTSP port ■ RTP port for audio ■ RTCP port for audio ■ RTP port for video ■ RTCP port for video If you have changed the port numbers on the Network page, please open the ports accordingly on your router. For information on how to forward ports on the router, please refer to your router’s user’s manual. 3.
