Inhaltszusammenfassung zur Seite Nr. 1
INSTRUCTION
MANUAL
Intense-IR Camera
CVC5735DNV / CVC5735DNVW
CVC5835DNV / CVC5835DNVW
CVC5935DNV / CVC5935DNVW
Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without notice and without incurring any obligation. Rev. 6/20/2012
Inhaltszusammenfassung zur Seite Nr. 2
Contents ◑ Contents ...................................................... 1 ◑ Precautions ................................................. 2, 3 ◑ Safety Instructions ...................................... 4 ◑ Package Contents ....................................... 5 ◑ Camera Installation ..................................... 6-8 ◑ Specifications .............................................. 9-11 ◑ Camera Dimension ..................................... 12 ◑ OSD Menu Details .....
Inhaltszusammenfassung zur Seite Nr. 3
Precautions Do not install the camera in Do not install the camera under Do not touch the front lens of the extreme temperature conditions. unstable lighting conditions. camera. Only use the camera under conditions Severe lighting change or flicker can This is one of the most important parts of the where temperatures are between cause the camera to work improperly. camera. Be careful not to leave -10°C and +50°C. Be especially careful to provide fingerprints on the lens cover. ventilation when
Inhaltszusammenfassung zur Seite Nr. 4
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION RISK OF ELECTRIC SHOCK RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT OPEN DO NOT REMOVE COVER(OR BACK). CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK NO USER-SER VICEABLE PARTS INSIDE. CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Inhaltszusammenfassung zur Seite Nr. 5
Safety Instructions Precautions for use ◑ This camera should be installed by qualified personnel only ◑ There are no user serviceable parts inside ◑ Do not disassemble this camera other than to make initial adjustments ◑ Use a UL approved regulated 24 volt AC or 12 volt DC power supply ◑ Use appropriate low voltage power cable to prevent fire or electrical shock ◑ Please insure that your installation area can support the weight of the camera Please handle this camera carefully : ◑ Do
Inhaltszusammenfassung zur Seite Nr. 6
Package Contents Please make sure that the following items are included in the Package: 1) CVC5735DNV, CVC5735DNVW, CVC5835DNV, CVC5835DNVW, CVC5935DNV, CVC5935DNVW • 1 Video Test Connector, Power Jack • 1 Wrench • Set Screw - 3 Tapping Screws 4x25 - 1 Hexagon Socket Screw M5x8 - 5 -
Inhaltszusammenfassung zur Seite Nr. 7
CAMERA INSTALLATION - 6 -
Inhaltszusammenfassung zur Seite Nr. 8
CAMERA INSTALLATION Compatibility 1) CVC5735DNV, CVC5735DNVW, CVC5835DNV, CVC5835DNVW, CVC5935DNV, CVC5935DNVW INTWM INTPM - 7 -
Inhaltszusammenfassung zur Seite Nr. 9
CAMERA INSTALLATION 1. CVC5735DNV, CVC5735DNVW, CVC5835DNV, CVC5835DNVW, CVC5935DNV, CVC5935DNVW DOME BASE ASSEMBLY TAPPING SCREW 4X25, 3EA DOME COVER ASSEMBLY HEXAGON SOCKET SCREW M5x8, 1EA - 8 -
Inhaltszusammenfassung zur Seite Nr. 10
Intense - IR Vandal Dome Camera DC Auto Iris Varifocal Lens(4mm-9mm) / IR LED Built-in 33 pcs CVC5735DNV ■ ■ CVC5735DNVW 600TV Lines DC Auto Iris Varifocal Lens (4mm-9mm) True Day/Night Capability ICR-IR Cut Filter Removable 850nm IR LEDs x 33pcs SPECIFICATIONS MODEL CVC5735DNV / CVC5735DNVW 1/3" SONY Super HAD ll CCD Sensor NTSC=811(H) * 508(V) / PAL=795(H) * 595(V) Total Pixels NTSC=768(H) * 494(V) / PAL=752(H) * 582(V) Effective Pixels 2:1 Interlace Scanning System Internal / Line Lock(Option
Inhaltszusammenfassung zur Seite Nr. 11
Intense - IR Vandal Dome Camera DC Auto Iris Varifocal Lens(2.8mm-12mm) / IR LED Built-in 33 pcs CVC5835DNV ■ ■ CVC5835DNVW 600TV Lines DC Auto Iris Varifocal Lens (2.8mm-12mm) True Day/Night Capability ICR-IR Cut Filter Removable 850nm IR LEDs x 33pcs SPECIFICATIONS MODEL CVC5835DNV / CVC5835DNVW 1/3" SONY Super HAD ll CCD Sensor NTSC=811(H) * 508(V) / PAL=795(H) * 595(V) Total Pixels NTSC=768(H) * 494(V) / PAL=752(H) * 582(V) Effective Pixels 2:1 Interlace Scanning System Internal / Line Lock(
Inhaltszusammenfassung zur Seite Nr. 12
Intense - IR Vandal Dome Camera DC Auto Iris Varifocal Lens(9mm-22mm) / IR LED Built-in 33 pcs CVC5935DNV ■ ■ CVC5935DNVW 600TV Lines DC Auto Iris Varifocal Lens (9mm-22mm) True Day/Night Capability ICR-IR Cut Filter Removable 850nm IR LEDs x 33pcs SPECIFICATIONS MODEL CVC5935DNV / CVC5935DNVW 1/3" SONY Super HAD ll CCD Sensor NTSC=811(H) * 508(V) / PAL=795(H) * 595(V) Total Pixels NTSC=768(H) * 494(V) / PAL=752(H) * 582(V) Effective Pixels 2:1 Interlace Scanning System Internal / Line Lock(Opti
Inhaltszusammenfassung zur Seite Nr. 13
CAMERA DIMENSION 1) CVC5735DNV, CVC5735DNVW, CVC5835DNV, CVC5835DNVW, CVC5935DNV, CVC5935DNVW 5.47” dia 5.47” dia 3.93” dia - 12 - 2.00” 3.93”
Inhaltszusammenfassung zur Seite Nr. 14
OSD Control Button 1. Type A, Type B, Type C of OSD button could be used when it needs to OSD control. 2. Type D is extra Option (wired Remote controller) - 13 -
Inhaltszusammenfassung zur Seite Nr. 15
How to Set Up the camera menu ● Setup Menu - 14 -
Inhaltszusammenfassung zur Seite Nr. 16
- 15 -
Inhaltszusammenfassung zur Seite Nr. 17
- 16 -
Inhaltszusammenfassung zur Seite Nr. 18
Menu Set Up Menu items can be selected by using the OSD buttons of the camera 1. Press the Set Up button. * The Set Up menu will be displayed on the monitor. SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.DAY / NIGHT COLOR 5.3DNR ON 6.SPECIAL 7.ADJUST 8.RESET 9.EXIT 2. Move and select the required function using the Up and Down button. * Move the arrow indicator Up or Down to select the desired feature by pressing the Up or Down button. SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.DAY / NIGHT
Inhaltszusammenfassung zur Seite Nr. 19
3. Change menu settings using the Left or Right button. * Available values or Status are displayed by pressing the Left or Right buttons. Press the button until desired value / status is displayed. 4. After Changing the setting move the arrow indicator to EXIT and press the SET button to EXIT. NOTE * Move to the available submenu by moving arrow to desired feature. * Submenu is not available when this symbol is display "- - - -" Lens 1. Move the arrow indicator to LENS using the
Inhaltszusammenfassung zur Seite Nr. 20
NOTE * When DC is selected, the brightness can be adjusted. The brightness control range is 1 ~ 100. Lens BRIGHTNESS 100 RETURN 3. Press the RETURN to return to the SETUP menu. Exposure This function is used to select Automatic or Manual shutter speed control. 1. On the Set Up menu screen select EXPOSURE by using the Up or Down button. 2. Select the desired shutter mode by pressing the Left or Right button. SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.DAY / NIGHT COLOR 5.3DNR ON 6.SPECIAL 7.ADJU
