Inhaltszusammenfassung zur Seite Nr. 1
00600A-SCC-C6407-ENG 8/17/06 3:27 PM ˘` 1
SmartDome Camera
SCC-C6407
E
Owner’s Instructions
F
Manuel d’instruction
Es
Manual del usuario
J
Part : AB68-00600A(00)
Printed in China
Inhaltszusammenfassung zur Seite Nr. 2
00600A-SCC-C6407-ENG 8/17/06 3:27 PM ˘` 3 Important Safety Instructions Safety Precautions 1. Read these instructions. The purpose of this information is to ensure proper use of this product to 2. Keep these instructions. prevent danger or damage to property. Please be sure to observe all 3. Heed all warnings. precautions. 4. Follow all instructions. * The precautions are divided into "Warnings" and "Cautions" as 5. Do not use this apparatus near water. distinguished below: 6. Clean only with
Inhaltszusammenfassung zur Seite Nr. 3
00600A-SCC-C6407-ENG 8/17/06 3:27 PM ˘` 5 6. Do not place conductive objects (e.g., screwdrivers, coins, and metal FCC STATEMENT things) or containers filled with water on top of the camera. (Doing so may cause personal injury due to fire, electrical shock, or falling objects.) This device complies with Part 15 of the FCC Rules. Operation is subject to 7. Do not install the unit in humid, dusty, or sooty positions. the following two conditions: (Doing so may cause fire or electrical shock.) (
Inhaltszusammenfassung zur Seite Nr. 4
00600A-SCC-C6407-ENG 8/17/06 3:27 PM ˘` 1-1 Before Usage This is a basic instruction manual for the SCC-C6407 user. It contains all the instructions needed to use the SCC-C6407 from a simple introduction of the control positions and functions of the SCC-C6407 to installation methods in the set up menu. We recommend all users of the SCC-C6407 from the advanced E user who has used similar cameras before to the general user to read the instruction manual before using. The most frequently used f
Inhaltszusammenfassung zur Seite Nr. 5
00600A-SCC-C6407-ENG 8/17/06 3:27 PM ˘` 1-3 Table of contents 4. ZONE SET ..................................................................................3-19 Before Usage...............................................................................................1-1 - PRIVACY ZONE .......................................................................3-19 - STYLE....................................................................................3-19 Chapter 1 SCC-C6407 Overview..........
Inhaltszusammenfassung zur Seite Nr. 6
00600A-SCC-C6407-ENG 8/17/06 3:27 PM ˘` 1-5 SCC-C6407 Introduction Chapter 1 SCC-C6407 Overview SCC-C6407 is a zoom lens built in smart dome camera which provides you with the best monitoring function in connection with In this chapter we will briefly introduce the SCC-C6407 and show CCTV at banks or companies. E main functions, locations of control and Switch Setting. The SCC-C6407 is a high quality surveillance camera using x32 zoom lens and digital zoom IC, it can catch clear images up to
Inhaltszusammenfassung zur Seite Nr. 7
00600A-SCC-C6407-ENG 8/17/06 3:27 PM ˘` 1-7 Locations of Control FRONT BACK E 1-7 1-8
Inhaltszusammenfassung zur Seite Nr. 8
00600A-SCC-C6407-ENG 8/17/06 3:27 PM ˘` 1-9 ADAPTER CONNECTION INITIAL SETTING CAMERA ADDRESS SETUP Use SW701, SW702, or 703 for Camera Address setup. You may allocate up to 255 addresses by using SW701 to set the 3rd digit, SW702 the 2nd digit, and SW703 the 1st digit. EX) In case of Camera Address 1, see the following figure for setup. SCC-C6407 Adapter BOARD E SW701 SW702 SW703 Setting communication Protocol Use number 1~4 PIN of SW704 to set communication Protocol. PIN PIN1 PIN2 PIN3 PIN4
Inhaltszusammenfassung zur Seite Nr. 9
00600A-SCC-C6407-ENG 8/17/06 3:27 PM ˘` 1-11 Setting RS-422A/RS-485 termination Chapter 2 SCC-C6407 Installation As it is shown in the structure map, when Controller and RS-422A/RS- 485 is connected it should be terminated according to the Cable feature E of impedance on the each end of the transmitting line to transfer the In this chapter, we will check the contents of the package before signals in long distance by controlling the reflection of the signals to the installing the SCC-C6407, a
Inhaltszusammenfassung zur Seite Nr. 10
00600A-SCC-C6407-ENG 8/17/06 3:27 PM ˘` 2-2 Before Installing Preparing the Cables To install and use the SCC-C6407, the following cables should be Checking Package Contents prepared. Please check that all components listed below are included in the package: Power Adapter Cable The cable that plugs into the SCC-C6407 power input receptacle has the rated voltage of AC24V, 1.5A. E Check the rated voltage before using the cable. SCC-C6407 Bracket anchor Owner’s Instructions Video Cable The SCC-C
Inhaltszusammenfassung zur Seite Nr. 11
00600A-SCC-C6407-ENG 8/17/06 3:27 PM ˘` 2-4 Cable Connection Installing SCC-C6407 1. First, connect one end of the Installation Precautions BNC video cable connector to the Video Output Terminal 1) Make sure that the installation site can sufficiently support a minimum of (VIDEO OUT) four times the net weight of the SCC-C6407 SmartDome Camera and other accessories. 2. Then, connect the other end of 2) Install in an area where the space above the ceiling board is over 18 cm the connector to t
Inhaltszusammenfassung zur Seite Nr. 12
00600A-SCC-C6407-ENG 8/17/06 3:27 PM ˘` 2-6 5) CEILING MOUNT ADAPTOR (SADT-100CM) 3) INDOOR HOUSING (SHG-120) This adaptor is used for installing the indoor housing or the outdoor This housing is used for installing the SmartDome Camera to an indoor housing for the SmartDome Camera to a concrete ceiling. wall or a ceiling. E 6) POLE MOUNT ADAPTOR (SADT-100PM) 4) OUTDOOR HOUSING (SHG-220) This adaptor is used for installing the WALL MOUNT ADAPTOR This housing is used for installing the SmartDo
Inhaltszusammenfassung zur Seite Nr. 13
00600A-SCC-C6407-ENG 8/17/06 3:27 PM ˘` 2-8 Installing the Camera 5. [Figure 5] Match the 6. Pull the safety wire from the case BRKT-ANCHOR and CAMERA body, and assembly it to the ADAPTER and use 4screws camera holder. 1. [Figure 1] Install the structure on the (PH M4 x 8) to assemble them. ceiling. (Refer to Installation reference for the Length of the structure) [Figure 5] [Figure 6] * Built in by the builder of the structure E [Figure 1] Length of ceiling Hole 2. Make a hole in the ceili
Inhaltszusammenfassung zur Seite Nr. 14
00600A-SCC-C6407-ENG 8/17/06 3:27 PM ˘` 3-1 Structure of the Setup Menu CAMERA SET CAMERA ID ON.../OFF V-SYNC INT/LINE... COLOR/BW COLOR.../BW.../AUTO... Chapter 3 Setup Menu Overview MOTION DET ON.../OFF ZOOM SPEED 1/2/3/4 DIGITAL ZOOM OFF/X2~X10 DISPLAY ZOOM OFF/ON DISPLAY P/T OFF/ON In this chapter, we will look over the Setup Menu of the E EXIT QUIT/SAVE/PRESET SCC-C6407, First we'll look over the overall structure of the Setup Menu, and then we'll look at the functions of each menu. V
Inhaltszusammenfassung zur Seite Nr. 15
00600A-SCC-C6407-ENG 8/17/06 3:27 PM ˘` 3-3 ❈ If the power is turned off after PRESET, AUTO PAN, SCAN, ALARM SET ALARM PRIORITY SET ALARM1~8 1~8 PATTERN function is activated and no other control is made, camera EXIT QUIT/SAVE will do the same function after the power is turned on. ALARM IN SET ALARM1~8 NO/NC/OFF ❈ Menu setting is available only when tilt location is under 90°. EXIT QUIT/SAVE When tilt location is over 90° and m
Inhaltszusammenfassung zur Seite Nr. 16
00600A-SCC-C6407-ENG 8/17/06 3:27 PM ˘` 3-5 (CAMERA ID) COLOR/BW (CAMERA SET) CAMERA ID ON... A B C D E F G H I J K L In the COLOR/BW menu, you can switch ON or OFF the IR (infrared) Filter. V-SYNC INT M N O PQ R S T U V W X COLOR/BW COLOR... ➜ In a poor illumination environment, the IR filter is turned off in the BW mode the its Y Z 0 1 2 3 4 5 6 7 8 9 MOTION DET OFF sensitivity increases as high as a black and white camera. On the other hand, the ZOOM SPEED 3 Press : ! - + ✽ ( ) / DIGIT
Inhaltszusammenfassung zur Seite Nr. 17
00600A-SCC-C6407-ENG 8/17/06 3:27 PM ˘` 3-7 Select ON and press [ENTER] and the MOTION DET additional menu will ❈ In AUTO mode, AGC will be displayed as “---“. You can’t adjust the appear. The AREA menu, selecting the screen area where the MOTION settings manually. detection function will be applied may be selected by PRESET or USER. Set AREA to PRESET and the MOTION detection function will be applied to (CAMERA SET) (AUTO) the factory default part. CAMERA ID OFF If you set the AREA menu to
Inhaltszusammenfassung zur Seite Nr. 18
00600A-SCC-C6407-ENG 8/17/06 3:27 PM ˘` 3-9 DIGITAL ZOOM EXIT The EXIT menu is used to quit the CAMERA SET menu of the You may set up the digital zoom magnification ratio in the DIGITAL ZOOM SCC-C6407 and return to the MAIN MENU. menu. The magnification ratio ranges from OFF to 10. If you set Digital - QUIT : Ignores the changed information and restores the saved Zoom of SCC-C6407 to max. 10 times, the mode will become the 32 time information. optical zoom and you will be able to enlarge a su
Inhaltszusammenfassung zur Seite Nr. 19
00600A-SCC-C6407-ENG 8/17/06 3:27 PM ˘` 3-11 For items in the BLC menu, the user can set the area and location of the (VIDEO SET) (MANUAL) BLC area by pressing [ENTER] key after put the cursor on USER… using the [Left, Right] key. For AREA items, you can use the [Up, Down, Left, IRIS MANU... Right] key to designate the AREA, and then press the [ENTER] key. SHUTTER OFF AGC OFF You can set the location for areas using the [Up, Down, Left, Right] key in Press the WHITE BAL ATW1 the LOCATION. ENTE
Inhaltszusammenfassung zur Seite Nr. 20
00600A-SCC-C6407-ENG 8/17/06 3:27 PM ˘` 3-13 WHITE BAL (VIDEO SET) (FLICKERLESS) Lights are generally denoted as color temperatures and expressed in IRIS ALC... SHUTTER AUTOX2... Kelvin (K) units. ➜ MOTION NORM The general light color temperatures are shown below. WHITE BAL ATW1 DIS --- Press FOCUS MODE ONEAF [Enter] FLICKERLESS OFF SPECIAL ... RET EXIT QUIT 10000K Blue sky AGC 9000K The AGC menu was designed to provide you with brighter screen supposed you Rainy photographed a
