Bedienungsanleitung Pelco AV8180

Inhaltszusammenfassung zur Seite Nr. 1

Release Notes
Arecont Vision IP Cameras Supported on Digital Sentry
®
Integral Digital Sentry digital video management systems (DVMS) support certain
Arecont Vision IP camera models. The camera models listed in this document can be
used with Digital Sentry IP camera driver version 6.8.0.126 and later. Refer to each
camera’s table for information about the hardware and software features validated for
use on a Digital Sentry system. Any general limitations or special instructions are listed
a

Inhaltszusammenfassung zur Seite Nr. 2

• For optimal performance, do not use the Digital Sentry client software on the Digital Sentry system to view video from Arecont Vision cameras, except for configuration purposes. Some servers do not meet the minimum requirements to run the client software in this manner. • A single Arecont Vision driver in DSAdmin controls all supported Arecont Vision cameras. Arecont Vision AV1300 Firmware 62406 Supported Resolutions 1280 x 1024, 640 x 512 FPS 1–30 Number of Quality Settings 21 Supported

Inhaltszusammenfassung zur Seite Nr. 3

Arecont Vision AV3100 Firmware 62414 Supported Resolutions 1920 x 1200, 960 x 600 FPS 1–22 Number of Quality Settings 20 Supported Codec MJPEG Supported Motion Detection Integral, In-Camera Pan/Tilt/Zoom (PTZ) Not available NOTES: • To capture images larger than 2 MP, you must install Integral IP camera driver 6.7.0.5 or later and then Megapixel Support for DS Server/VAU 4.1. To obtain a copy of all necessary software versions, go to www.pelco.com. • To view images larger than 2 MP, you must i

Inhaltszusammenfassung zur Seite Nr. 4

Arecont Vision AV3130 Firmware 62315 Supported Resolutions Day mode: 1920 x 1200, 960 x 600 Night/Automatic mode: 1280 x 1024, 640 x 512 FPS 1–20 Number of Quality Settings 21 Supported Codec MJPEG Supported Motion Detection Integral Pan/Tilt/Zoom (PTZ) Not available NOTES: • To capture images larger than 2 MP, you must install Integral IP camera driver 6.7.0.5 or later and then Megapixel Support for DS Server/VAU 4.1. To obtain a copy of all necessary software versions, go to www.pelco.com. •

Inhaltszusammenfassung zur Seite Nr. 5

Arecont Vision AV5100 Firmware 62406 Supported Resolutions 2560 x 1920, 1280 x 960 FPS 1–16 Number of Quality Settings 20 Supported Codec MJPEG Supported Motion Detection Integral Pan/Tilt/Zoom (PTZ) Not available NOTES: • To capture images larger than 2 MP, you must install Integral IP camera driver 6.7.0.5 or later and then Megapixel Support for DS Server/VAU 4.1. To obtain a copy of all necessary software versions, go to www.pelco.com. • To view images larger than 2 MP, you must install Meg

Inhaltszusammenfassung zur Seite Nr. 6

Arecont Vision AV8180 and AV8360 Firmware 62410 Supported Resolutions 1600 x 1200, 800 x 600 (per sensor) x4 FPS 1–22 Number of Quality Settings 20 Supported Codec MJPEG Supported Motion Detection Integral Pan/Tilt/Zoom (PTZ) Not available NOTES: • The frame rate and quality for all four camera sensors (heads) must be set to the same value. • AV8180 and AV8360 do not have a configuration Web page. • AV8180 and AV8360 do not support in-camera motion detection. Using Integral motion detection a