Inhaltszusammenfassung zur Seite Nr. 1
4 Camera Video Surveillance
System with Multi
Camera Viewing
Instruction Manual
English Version 1.0
MODEL:
SHS-4QM
www.lorexcctv.com
Copyright © 2006 LOREX Technology Inc.
Inhaltszusammenfassung zur Seite Nr. 2
Thank you for purchasing the SHS-4QM. Lorex is committed to providing our customers with a high quality, reliable security product. The SHS-4QM Video Surveillance System with 4 Indoor/Outdoor Cameras is easy to set up (connects to any TV, VCR or Monitor) making this security system perfect for protecting your home, family and personal property. The Motion Detection feature notifies you when motion is detected through the cameras, and the 4 Color Cameras allow you to monitor multiple locati
Inhaltszusammenfassung zur Seite Nr. 3
Important Safeguards Important Safeguards In addition to the careful attention devoted to quality standards in the manufacture process of your video product, safety is a major factor in the design of every instrument. However, safety is your responsibility too. This sheet lists important information that will help to assure your enjoyment and proper use of the video product and accessory equipment. Please read them carefully before operating and using your video product. Installation 1. Read
Inhaltszusammenfassung zur Seite Nr. 4
Important Safeguards Service Use 13. Servicing - Do not attempt to service this video 19. Cleaning - Unplug the video product from the wall equipment yourself as opening or removing covers outlet before cleaning. Do not use liquid cleaners or may expose you to dangerous voltage or other aerosol cleaners. Use a damp cloth for cleaning. hazards. Refer all servicing to qualified service personnel. 20. Product and Cart Combination - Video and cart combination should be moved with care. Quick 1
Inhaltszusammenfassung zur Seite Nr. 5
General Precautions NOTE This equipment has been certified and found to comply with the limits regulated by FCC, EMC, and LVD. Therefore, it is designated to provide reasonable protection against interference and will not cause interference with other appliance usage. However, it is imperative that the user follows this manuals guidelines to avoid improper usage which may result in damage to the unit, electrical shock and fire hazard injury In order to improve the feature functions and qualit
Inhaltszusammenfassung zur Seite Nr. 6
SHS-4QM FEATURES SHS-4QM FEATURES � Indoor/Outdoor, Weather Resistant Color Cameras � IR illumination provides night vision up to 5 meters � Support various display modes: QUAD Split Mode, Full Screen Mode, PIP Screen Mode. � System with remote control for easy operation. � Easily connects to your TV or VCR � Multi camera viewing allows you to view all cameras simultaneously � Motion Detection alerts the user and automatically switches to the camera 6
Inhaltszusammenfassung zur Seite Nr. 7
Table of Contents Table of Contents Important Safeguards ............................................................................ 3-4 General Precautions ................................................................................. 5 SHS-4QM Features .................................................................................. 6 Table of Contents ...................................................................................... 7 Getting Started .................................
Inhaltszusammenfassung zur Seite Nr. 8
Getting Started Getting Started The SHS-4QM comes with the following components: Quad Processor / Switcher 4 x 60’ DIN Extension 4 x Weatherproof Color Cables Day/Night IR Cameras with Stands DIN Video Cable Remote Control Swticher Power Adapter CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE SYSTEM, INCLUDING ALL COMPONENTS SHOWN ABOVE. 8
Inhaltszusammenfassung zur Seite Nr. 9
SHS-4QM - Front View SHS-4QM - Front View 1 4 23 5 6 78 9 1. LED INDICATORS: � POWER - Indicates the Power Status (On/OFF) � ZOOM - Indicates the system is in ZOOM Mode. � FREEZE/AUTO - Indicates the system is in FREEZE/AUTO SEQUENCE Mode. 2. CHANNEL 1 / UP BUTTON - � Changes the view to CAM 1 in Viewing Mode. � Navigates UP in MENU Mode. 3. CHANNEL 2 / DOWN BUTTON - � Changes the view to CAM 2 in Viewing Mode. � Navigates DOWN in MENU Mode. 4. IR RECEIVER - Infrared receiver for Remote Contro
Inhaltszusammenfassung zur Seite Nr. 10
SHS-4QM - Front View SHS-4QM - Front View 1 4 23 5 6 78 9 6. CHANNEL 4 / RIGHT BUTTON - � Changes the view to CAM 4 in Viewing Mode. � Navigates RIGHT in MENU Mode. 7. QUAD / MENU / ESC BUTTON - � Changes the view to QUAD in Viewing Mode. � Press and hold for 3 seconds to Enter or Exit MENU mode. 8. FREEZE / AUTOSCAN BUTTON - � Press and briefly hold to freeze the onscreen image. Press the FREEZE button again to return to regular viewing. � Press and hold for 3 seconds to set the SHS system
Inhaltszusammenfassung zur Seite Nr. 11
SHS-4QM - Rear View SHS-4QM - Rear View 1 2 3 1. DIN OUTPUT - Connects the DIN Video cable to a TV/Monitor. 2. CAM1 - CAM4 DIN INPUTS - Camera inputs (for cameras with 4 pin DIN connection). . 3. DC 12V - Connects the 12V DC Power adapter 11
Inhaltszusammenfassung zur Seite Nr. 12
Remote Control Remote Control Listed below is a quick reference for the Remote Control. For details on specific features, refer to the Menu Setup on page #. MENU BUTTON - Enters Menu Setup NAVIGATION / ENTER - The NAVIGATION / ENTER BUTTONS are used to move Left / Right / Up / Down. FRZ BUTTON - Press the FRZ button to Freeze a full screen camera display. Press the FRZ button to unfreeze the current display. ZOOM BUTTON - Press to Zoom in the current display. Use the NAVIGATION BUT
Inhaltszusammenfassung zur Seite Nr. 13
SHS-4QM Cameras SHS-4QM Cameras The SHS-4QM Quad Switcher / Processor includes 4 CCD Color Indoor/Outdoor Cameras* INFRARED LEDs* - Provides illumination for low light conditions CAMERA LENS STAND - Metal stand connects to the Camera for mounting to walls, ceilings and other surfaces INPUT CABLE (BACK) - Connects Video / Power from the SHS-4QM switcher to the Camera * Picture changes from Color to B&W under low light conditions on Night Vision Cameras 13
Inhaltszusammenfassung zur Seite Nr. 14
Camera Installation Camera Installation Before you install the camera, carefully plan where and how you will position the camera, and where you will route the cable that connects the camera to the SHS-4QM. Installation Warnings: � Select a location for the camera that provides a clear view of the area you want to monitor, which is free from dust, and is not in line-of-sight to a strong light source or direct sunlight. � Do not install the camera in a location where it will be � Plan the cab
Inhaltszusammenfassung zur Seite Nr. 15
Camera Installation Connecting Cameras 1. Connect the female end of the supplied 60’ extension’ cable to the camera. NOTE: Confirm that the arrows on the DIN Camera Cable and the DIN Extension cable are pointed together when connecting the cable. If the pins in the DIN Cable are bent, the Camera will NOT function. 2. Connect the male end of the supplied 60’ extension cable to an open DIN channel on the back of the SHS-4QM. Continue connecting additional DIN cameras. NOTE: The arrow on th
Inhaltszusammenfassung zur Seite Nr. 16
Connecting the SHS-4QM Video Cable Connecting the SHS-4QM Video Cable Connect the DIN end of the Video Cable to the SHS-4QM. Connect the RCA VIdeo cable to the TV, VCR or Monitor. TV / VCR / MONITOR SHS-4QM Connect the Yellow Video Cable to Connect the DIN Cable end to the an available video. Video Output port Connectivity Diagram TV / VCR / MONITOR 4 x CAMERAS & 60’ POWER EXTENSION CABLE ADAPTER VIDEO CABLE SHS-4QM SYSTEM 16
Inhaltszusammenfassung zur Seite Nr. 17
Menu Setup Menu Setup � Press the MENU button for 3 seconds to SETUP MENU SETUP enter Menu Mode. � Press the ⇐ ⇑ ⇒ ⇓ buttons to navigate SYSTEM DISPLAY AUTO within the Menu and choose the desired SETUP SETUP SEQUENCE selection. CAMERA MOTION EVENT EVENT � Press the OK Button to accept the SETUP SETUP SETUP REPORT selection (labelled as ENTER in menu options) ⇐⇑⇓⇒ SELECT ENTER ENTER MENU EXIT � Press the MENU button to Exit the Menu Setup. System Setup SYSTEM SETUP � DATE/TIME - Press the
Inhaltszusammenfassung zur Seite Nr. 18
Menu Setup DISPLAY SETUP Display Setup DISPLAY ONSCREEN: � DISPLAY ONSCREEN - Press the ⇑ ⇐ . TITLE . DATE . TIME ⇒ ⇓ buttons to navigate to the desired SCREEN POSITION: X:0 Y:0 selection. Press the enter button to set the Display Options for Title, Date and BORDER COLOR Time to ON/OFF. ¤ BLACK ¤ GREY 1 � SCREEN POSITION - Changes the ¤ GREY 2 position of the screen. Press the ⇑ ⇓ ¤ WHITE buttons to navigate, and press the ⇐ ⇒ ¤ OFF buttons to adjust the setting. ENTER ENTER ⇐⇑⇓⇒ SELECT ME
Inhaltszusammenfassung zur Seite Nr. 19
Menu Setup CAMERA SETUP Camera Setup CAMERA 1 TITLE: CAMERA01 � SWITCH BETWEEN CAMERAS - Use the ⇐ ⇒ buttons to switch between BRIGHTNESS: 0 CONTRAST: 0 CAMERA 1~4. SATURATION: 0 HUE: 0 � TITLE - Sets the name for the individual SHARPNESS: 0 Camera. Press the ⇑ ⇓ buttons to MIRRORING: OFF navigate, and press the ⇐ ⇒ buttons to select a character (A-Z, 0-9). ⇑⇓ SELECT ⇐ ⇒ ADJUST MENU EXIT � BRIGHTNESS / CONTRAST / SATURATION / HUE / SHARPNESS - Individual camera display settings. Press th
Inhaltszusammenfassung zur Seite Nr. 20
Menu Setup MOTION SETUP Motion Setup CAMERA 1 DETECTION TIME � SENSITIVITY - Sets the Motion ALWAYS ON Sensitivity. Press the ⇑ ⇓ buttons to ON: 00:00 OFF: 13:00 navigate, and press the ⇐ ⇒ buttons SENSITIVITY: 0 to set the values (min~max). VELOCITY: 0 MASKING AREA � VELOCITY - Sets the Motion Velocity. X,Y (00,00) Press the ⇑ ⇓ buttons to navigate, and press the ⇐ ⇒ buttons to set the values ⇑⇓ SELECT ⇐ ⇒ ADJUST MENU EXIT (min~max). � MASKING AREA - Turns on MASKING for the specified ar
