Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
Table of Contents Table of Contents Product Overview ...................................................3 RS-485 ......................................................................37 Package Contents ..............................................................3 Maintenance ....................................................................38 System Requirements .......................................................3 Device Management ..................................................38 In
Inhaltszusammenfassung zur Seite Nr. 3
Section 1 - Product Overview Product Overview Package Contents • D-Link DCS-3410 PoE Day & Night Network Camera • CAT5 Ethernet Cable • Power Adapter • Manual and Software on CD • Quick Install Guide • Camera Stand Note: Using a power supply with a different voltage than the one included with the package will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller. System Requirements ® ® • Windows XP or Windows Vista • At least
Inhaltszusammenfassung zur Seite Nr. 4
Section 1 - Product Overview Introduction The D-Link DCS-3410 PoE Day & Night Network Camera is a powerful surveillance system that can connect to your network. The DCS-3410 differs from a conventional PC Camera because it is a standalone system with a built-in CPU and Web server, providing a low-cost solution capable of solving demanding security and home/office monitoring needs. It is designed with aluminum casing for maximum heat dissipation and better protection. Snapshot enables you to s
Inhaltszusammenfassung zur Seite Nr. 5
Section 1 - Product Overview Features • Supports a Variety of Protocols: Supporting TCP/IP networking, SMTP e-mail, HTTP and other Internet related protocols, the DCS- 3410 Network Camera can be integrated easily into other Internet/Intranet applications because of its standards-based features. • Remote Snapshot Images: Using the Snapshot feature, you save snapshots directly from the Web browser to a local hard drive without installing any software, making it convenient to instantly capture any
Inhaltszusammenfassung zur Seite Nr. 6
Section 1 - Product Overview Hardware Overview Microphone Connector Audio Out Connector The DCS-3410 PoE Day & Night Network Camera has an The DCS-3410 provides an Audio Out connector to be internal microphone built-in. However, you have the option used for -way audio. Speakers (not included) may be of using an external microphone by plugging it into the connected to the camera to provide audio for -way microphone connector. communication. Ethernet Cable Connector (PoE) The Network Came
Inhaltszusammenfassung zur Seite Nr. 7
Section 1 - Product Overview Hardware Overview I/O Connector The DCS-3410 provides a terminal block with three pairs of connectors situated on the back panel. Two pairs are for input and the other is for output. The I/O connectors provide the physical interface to send and receive digital signals to and from a variety of external devices. Power LED The power LED is on the back of the camera. As soon as the power adapter is connected to the camera, the LED will turn green. Once a connection
Inhaltszusammenfassung zur Seite Nr. 8
Section 1 - Product Overview Hardware Installation Connect the Ethernet Cable Connect an Ethernet cable to the network cable connector located on the Network Camera’s back panel and attach it to the network. Attach the External Power Supply Attach the external power supply to the DC power input connector located on the Network Camera’s back panel (labeled DC 1V) and connect it to an AC power outlet. Note: When you have a proper connection, the LED will turn green. The light may cycle on and
Inhaltszusammenfassung zur Seite Nr. 9
Section 1 - Product Overview The Network Camera comes with a camera stand with a swivel ball screw head that can be attached to the Network Camera bottom socket cavity. Attach the camera stand to the Network Camera and station it for your application. There are holes located in the base of the camera stand allowing the Network Camera to be mounted to the ceiling, or any wall securely. Socket for camera stand D-Link DCS-3410 User Manual 9
Inhaltszusammenfassung zur Seite Nr. 10
Section - Installation Software Installation Turn on the computer and Insert the D-Link DCS-3410 Driver CD in the CD-ROM drive. The step-by-step instructions that follow are ® shown in Windows XP. The steps and screens are similar for the other Windows operating systems. Click Setup Wizard If the CD Autorun function does not automatically start on your computer, click Windows Start > Run. In the Run command box type “D:\DCS3410.exe”, where D: represents the drive letter of your CD-ROM. If i
Inhaltszusammenfassung zur Seite Nr. 11
Section - Installation Click Next to continue. Click Next Click Yes to accept the License Agreement. Click Yes D-Link DCS-3410 User Manual 11
Inhaltszusammenfassung zur Seite Nr. 12
Section - Installation To start the installation click Next. Note: The installation may take several minutes to complete. Click Next D-Link DCS-3410 User Manual 1
Inhaltszusammenfassung zur Seite Nr. 13
Section - Installation Click Finish to complete the installation. Click Finish D-Link DCS-3410 User Manual 13
Inhaltszusammenfassung zur Seite Nr. 14
Section 3 - Configuration Configuration This section will show you how to configure your new D-Link Network Camera using the Setup Wizard. Setup Wizard Configuration Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Click D-Link Setup Wizard SE D-Link DCS-3410 User Manual 14
Inhaltszusammenfassung zur Seite Nr. 15
Section 3 - Configuration The Setup Wizard will appear and show the MAC address of the DCS-3410 and an IP Address (which may or may not be correct depending on what you have your DCS-3410 connected to). If you have a DHCP server on your network, there will be a valid IP Address displayed here. Click the Wizard button to continue. Note: A DHCP server is a device that supplies the IP address. Enter the admin ID and password. Note: The default Admin ID is admin with the password left blank. Cl
Inhaltszusammenfassung zur Seite Nr. 16
Section 3 - Configuration Select DHCP if you want to obtain a new IP address every time the camera boots up. Click Next Select static IP to use the same IP address at each boot up. Click Next D-Link DCS-3410 User Manual 16
Inhaltszusammenfassung zur Seite Nr. 17
Section 3 - Configuration Click Restart to save your settings and reboot the Network Camera. Click Restart Click the button labeled Link to access the web configuration page. The Setup Wizard will automatically open your web browser to the IP address of the DCS-3410, in this example it is: http://19.198.0.10. Your DCS-3410 may have a different IP Address. Click Link D-Link DCS-3410 User Manual 17
Inhaltszusammenfassung zur Seite Nr. 18
Section 3 - Configuration Web-based Configuration Utility This section will show you how to configure your new D-Link Network Camera using the Web-based Configuration Utility. To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address for your Network Camera (http://19.168.0.10) Note: For example, the address is 192.168.0.120. Your address may differ. Enter Admin for the username and then leave the password blank by default. Note: To change
Inhaltszusammenfassung zur Seite Nr. 19
Section 3 - Configuration Live Video Camera This section shows your camera’s live video. You may select the available thumbnails for your option of predefined Video Profile, Full Screen mode, and action items of taking Snapshot, Recording, Set Storage Folder, Listen, Talk, and Digital Output. You may also select your language setting using the drop-down menu. You can zoom in and out of the live video image using your mouse. Right-click to zoom out and left-click to zoom in on the image. Digita
Inhaltszusammenfassung zur Seite Nr. 20
Section 3 - Configuration Setup Wizard To quickly configure your Network Camera, click Internet Connection Setup Wizard, or click Manual Internet Connection Setup to manually configure your Network Camera. To quickly configure your Network Camera’s motion detection settings, click Motion Detection Setup Wizard and skip to page 4. If you want to enter your settings without running the wizard, click Manual Motion Detection Setup and skip to page 7. Internet Connection Setup Wizard This wiza
