Inhaltszusammenfassung zur Seite Nr. 1
PRO-93
300 Channel Dual Track-Trunking
Handheld Scanner
Owner’s Manual
Please read before using this equipment.
Inhaltszusammenfassung zur Seite Nr. 2
Contents Features .................................................................... 5 Scanning Legally ................................................. 9 Preparation ............................................................. 10 Power Sources .................................................. 10 Using Batteries .......................................... 10 Charging Rechargeable Batteries .............. 12 Using AC Power ......................................... 13 Using Vehicle Battery P
Inhaltszusammenfassung zur Seite Nr. 3
Storing Text Tags ............................................... 27 Assigning a Text Tag to a Channel ............. 27 Assigning a Text Tag to a Group ID ............ 28 Assigning a Text Tag to a Bank .................. 28 Text Input Chart .......................................... 29 Finding and Storing Active Frequencies ............ 30 Searching a Preprogrammed Frequency Range ....................................... 30 Searching Active Frequencies in Your Desired Frequency Range ............
Inhaltszusammenfassung zur Seite Nr. 4
Understanding Trunking .................................... 51 Setting Squelch for the Trunking Mode ............. 52 Programming Trunking Frequencies ................. 52 Programming Motorola Trunking Systems (UHF-Lo) ...................... 54 Programming Motorola Trunking System (800 MHz) ...................... 55 Programming Fleet Maps ........................... 56 Talk Group IDs ........................................... 58 Storing Talk Group IDs ............................... 58 Talk Gr
Inhaltszusammenfassung zur Seite Nr. 5
Features Your RadioShack Handheld Scanner is one of a new generation of scanners designed to track Motorola Type I and II (such as Smartnet and Privacy Plus ) and hybrid analog trunking systems, and GE/Ericsson (EDACS ) type systems, which are extensively used in many communication systems. Trunking communications systems let a large group of 2- way radio users (or even different groups of 2-way radio users) efficiently use a set of frequencies. Instead of se- lecting a specific freque
Inhaltszusammenfassung zur Seite Nr. 6
trunking systems only, once the control channels are programmed. 10 Channel-Storage Banks — let you store 30 chan- nels in each bank (300 channels) to group channels so calls are easier to identify. 10 ID-Storage Banks — let you store 1,000 IDs in 10 ID banks that have 5 sub-ID banks. 20 IDs are programmed in each sub-ID bank and let you easily identify the ID code. Weather Alert — automatically sounds the alarm tone to advise of hazardous weather conditions when it detects the alert signal on t
Inhaltszusammenfassung zur Seite Nr. 7
you can hear more replies that are made on the same channel. Priority Channel — lets you set the scanner to check one channel every 2 seconds so you do not miss trans- missions. Attenuate — lets you program your scanner to reduce the scanner's sensitivity to strong local signals, to reduce interference or noise caused by these signals. Text Input — lets you input a text label for each chan- nel, talk group ID, bank, or other memory location so you can easily identify the transmission. Lock Out F
Inhaltszusammenfassung zur Seite Nr. 8
• 137–174 MHz • 216.0025–225 MHz • 406–512 MHz • 806–823.9875 MHz • 849–868.9875 MHz • 894–960 MHz • 1240–1300 MHz Use “A General Guide to Frequencies” on Page 64 to help you target frequency ranges in your service area so you can search for a wide variety of transmissions. The FCC Wants You to Know This equipment has been tested and found to comply with the limits for a scanning receiver, pursuant to Part 15 of the FCC Rules. These limits are designed to pro- vide reasonable protection again
Inhaltszusammenfassung zur Seite Nr. 9
• Connect the equipment into an outlet on a circuit dif- ferent from that to which the receiver is connected. FCC Rules This device complies with Part 15 of the . Op- eration is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note: Mobile use of this scanner is unlawful or requires a permit in some areas. Check the laws in your area. SCANN
Inhaltszusammenfassung zur Seite Nr. 10
Preparation POWER SOURCES You can power your scanner from any of three sources: • internal non-rechargeable batteries or rechargeable batteries (not supplied — see “Using Batteries” on Page 10). • standard AC power (with an optional AC adapter — see "“Using AC Power” on Page 13) • vehicle power (with an optional DC adapter — see “Using Vehicle Battery Power” on Page 13) Notes: • Connecting an AC or DC adapter to the scanner dis- connects internal batteries when you use the sup- plied non-recha
Inhaltszusammenfassung zur Seite Nr. 11
er, we recommend RadioShack nickel-metal hydride (Ni–MH) batteries. Warning: Never install non-rechargeable batteries in the rechargeable yellow battery holder. Non-rechargeable batteries can get hot or explode if you try to recharge them. Note: You must charge rechargeable batteries before you use them the first time. See “Charging Recharge- able Batteries” on Page 12. Cautions: • The battery holder fits only one way. Do not force it. • Use only fresh batteries of the required size and recommen
Inhaltszusammenfassung zur Seite Nr. 12
When battery power is low, (FNý (FNýâ8KK
Inhaltszusammenfassung zur Seite Nr. 13
• Rechargeable batteries last longer and deliver more power if you let them fully discharge once a month. To do this, use the scanner until (FNý (FNý (FNý (FNýâ8KK
Inhaltszusammenfassung zur Seite Nr. 14
Cautions: You must use a power source that sup- plies 9V DC and delivers at least 300 mA. ! Its center tip must be set to positive and its plug must fit the scanner's PWR DC 9V jack. Using an adapter that does not meet these specifi- cations could damage the scanner or the adapter. • Always connect the DC adapter to the scanner before you connect it to the power source. When you finish, disconnect the adapter from the power source before you disconnect it from the scanner. To connect the adapter
Inhaltszusammenfassung zur Seite Nr. 15
Always use 50-ohm coaxial cable, such as RG-58 or RG-8, to connect an outdoor antenna. For lengths over 50 feet, use RG-8 low-loss dielectric coaxial cable. If your antenna's cable does not have a BNC connector, you will also need a BNC adapter (not supplied, avail- able at your local RadioShack store). Follow the installation instructions supplied with the an- tenna, route the antenna cable to the scanner, then con- nect it to the antenna jack. Warning: Use extreme caution when installing or re
Inhaltszusammenfassung zur Seite Nr. 16
Traffic Safety Do not wear an earphone or headphones while you drive a vehicle or ride a bicycle. This can create a traffic haz- ard and can be illegal in some areas. Even though some earphones and headphones let you hear some outside sounds when you listen at normal levels, they still can present a traffic hazard. Connecting an Extension Speaker In a noisy area, an amplified speaker (not supplied), available at your local RadioShack store, might provide 1 more comfortable listening. Plug the sp
Inhaltszusammenfassung zur Seite Nr. 17
About Your Scanner Once you understand a few simple terms used in this manual and familiarize yourself with your scanner's fea- tures, you can put the scanner to work for you. You sim- ply determine the type of communications you want to receive, then set the scanner to scan them. A frequency is the receiving signal location (expressed in kHz or MHz). To find active frequencies, you can use the search function. You can also search the SEARCH banks, which are pre- programmed frequencies in the
Inhaltszusammenfassung zur Seite Nr. 18
PRI (Priority) — sets and turns the priority function on or off. TEXT — lets you input text. PAUSE — stops search. MODE — changes the receive mode (AM, FM, MOT, ED). / — turns on/off the display's backlight or when used with FUNC locks/unlocks the keypad to prevent ac- cidental entries. TUNE — lets you input a frequency and allows you to fine tune a frequency along with 8 8 or 9 9. 8 8 9 9 ATT (Attenuate) — turns attenuation on to reduce the scanner's sensitivity and block extremely strong signa
Inhaltszusammenfassung zur Seite Nr. 19
9/WXYZ — enters a 9, or inputs characters W, X, Y, or Z. 0 — enters a zero, or inputs characters ., -, #, _, @, +, *, &, /, ', $, %, !, ^, (, ), ?, ->, ` or <-. ./DELAY — enters a decimal point (necessary when pro- gramming frequencies), space, or programs delay time for the selected channel/search bank, or hyphen (in trunking ID setting). CL - clears an incorrect entry. QUICK START To help familiarize yourself with the scanner’s functions, keypad, and available frequencies, you can utilize one
Inhaltszusammenfassung zur Seite Nr. 20
10 banks (ò ò to é é) of 30 (òò òò to ðé ðé) channels each, a total ò ò é é òò òò ðé ðé of 300 channels. You can use each channel-storage bank to group frequencies, such as those used by Mo- torola trunking, EDACS trunking, Marine, CB, Police, Fire, Aircraft and Ham (see “Typical Band Usage” on Page 67). For example, a police department might use four fre- quencies, one for each side of town. You could program the police frequencies starting with òò òòò ò (the first channel òò òòò ò in bank 0)
