Inhaltszusammenfassung zur Seite Nr. 1
MS6000 MKII
User's Guide
konicaminolta.com
2004.6
0820-7732-01
30mm
0820-7732-01 CMYK
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
® Energy Star ® As an ENERGY STAR Partner, we have determined that this machine meets the ENERGY ® STAR Guidelines for energy efficiency. ® What is an ENERGY STAR Product? ® An ENERGY STAR product has a special feature that allows it to automatically switch to a ® “low-power mode” after a period of inactivity. An ENERGY STAR product uses energy more efficiently, saves you money on utility bills and helps protect the environment. Only the setting of “Auto Power Save (15 min.)” complies with the E
Inhaltszusammenfassung zur Seite Nr. 4
P-ii SAFETY INFORMATION This section contains detailed instructions on the operation and maintenance of this machine. To achieve optimum utility of this device, all operators should carefully read and follow the instructions in this manual. Please keep this manual in a handy place near the machine. Make sure you observe all of the precautions listed in this manual. * Ver07 Please note that some parts of the contents of this section may not correspond with the purchased product. Warning and Pr
Inhaltszusammenfassung zur Seite Nr. 5
P-iii SAFETY INFORMATION • Do not modify this product, as a fire, electrical shock, or break- down could result. If the product employs a laser, the laser beam source could cause blindness. Do not attempt to remove the covers and panels which have been fixed to the product. Some products have a high-voltage part or a laser beam source inside that could cause an electrical shock or blindness. Only use the power cord supplied in the package. If a power cord is not supplied, only use the p
Inhaltszusammenfassung zur Seite Nr. 6
P-iv SAFETY INFORMATION Do not place a flower vase or other container that contains water, or metal clips or other small metallic objects on this product. Spilled water or metallic objects dropped inside the product could result in a fire, electrical shock, or breakdown. Should a piece of metal, water, or any other similar foreign matter get inside the product, immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service represen
Inhaltszusammenfassung zur Seite Nr. 7
P-v SAFETY INFORMATION Do not use flammable sprays, liquids, or gases near this product, as a fire could result. Do not leave a toner unit or drum unit in a place within easy reach of children. Licking or ingesting any of these things could injure your health. Do not let any object plug the ventilation holes of this product. Heat could accumulate inside the product, resulting in a fire or malfunction. Do not install this product at a site that is exposed to direct sun- light, or nea
Inhaltszusammenfassung zur Seite Nr. 8
P-vi SAFETY INFORMATION Always use this product in a well ventilated location. Operating the product in a poorly ventilated room for an extended period of time could injure your health. Ventilate the room at regular intervals. Whenever moving this product, be sure to disconnect the power cord and other cables. Failure to do this could damage the cord or cable, resulting in a fire, electrical shock, or breakdown. When moving this product, always hold it by the locations speci- fied in t
Inhaltszusammenfassung zur Seite Nr. 9
P-vii SAFETY INFORMATION Do not touch or scratch the surface of the toner unit developing roller and the PC drum, as poor image quality could result. Use the supplies and consumables recommended by the dealer. Use of any supply or consumable not recommended could result in poor image quality and breakdown.
Inhaltszusammenfassung zur Seite Nr. 10
i Welcome This User’s Guide explains how to operate the unit and replenish its supplies. It also gives some troubleshooting tips as well as general precautions to be observed when operating the unit. To ensure the best performance and effective use of your unit, read this User’s Guide carefully until you familiarize yourself thoroughly with the unit's operation and features. Please keep this User’s Guide and use it as a quick and handy reference tool for immediately clarifying any questions tha
Inhaltszusammenfassung zur Seite Nr. 11
ii Notes to Operators and Key Operators The following safety rules should be observed: [1] The unit should be kept free from moisture, dirt, dust and exposure to heat and direct sun- light at all times. [2] Keep hands, hair and clothing away from rollers and other moving parts. [3] Before removing the Projection Lamp Unit, confirm that the machine is turned “OFF”. [4] Be sure that the proper voltage is used and that the machine is well grounded. The use of electrical extension cords is strongly
Inhaltszusammenfassung zur Seite Nr. 12
iii Notes to Operators and Key Operators Interference-Causing Equipment Standard (ICES-003 ISSUE 3) (For Canada Users) This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. CE Marking (Declaration of Conformity) (For European Users) This product complies with the following EU directives: 89/336/EEC, 73/23/EEC and 93/68/EEC directives. This declaration is valid for the area of the European Union(EU) only
Inhaltszusammenfassung zur Seite Nr. 13
iv Safety Information (MSP 3000 Printer) Laser Safety This printer is a page printer which operates by means of a laser. There is no possibility of danger from the laser, provided the printer is operated according to the instructions provided in this manual. Since radiation emitted by the laser is completely confined within protective housing, the laser beam cannot escape from the machine during any phase of user operation. Internal Laser Radiation -4 Maximum Radiation Power: 8.8 ×10 (W) Wave L
Inhaltszusammenfassung zur Seite Nr. 14
v Safety Information (MSP 3000 Printer) For Denmark ADVARSEL: Usynlig laserstråling ved åbning, når sikkerhedsafbrydere er ude af funk- tion. Undgå udsttelse for stråling. Klasse 1 laser produkt der opfylder IEC60825 sikkerheds kravene. For Finland, Sweden VAROITUS!: Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle. VARNING: Om apparaten används på annat sätt än i denna bruksanvisni
Inhaltszusammenfassung zur Seite Nr. 15
vi Safety Information (MSP 3000 Printer) For Norway ADVARSEL: Dersum apparatet brukes på annen måte enn spesifisert i denne bruksanvis- ning, kan brukeren utsettes for unsynlig laserstråling som overskrider grensen for laser klasse 1. -4 Dette er en halvleder laser. Maksimal effeckt til laserdiode er 8.8 × 10 W og bolgelengde er 770-810 nm. WARNING LABEL
Inhaltszusammenfassung zur Seite Nr. 16
vii Safety Information (MSP 3000 Printer) OZONE RELEASE (For all Users) During printer operation, a small quantity of ozone is released. This amount is not large enough to cause any adverse affects or harm. However, be sure the room where the machine is being used has adequate ventilation, especially if you are printing a high volume of materi- als, or if the machine is being used continuously over a long period. WARNING LABEL
Inhaltszusammenfassung zur Seite Nr. 17
viii Safety Information (MSP 3000 Printer)
Inhaltszusammenfassung zur Seite Nr. 18
1 Contents Chapter 1 Safety Notes 1. Installation Precautions ..........................................................1-2 Installation Site .................................................................. 1-2 Power Source .....................................................................1-2 Grounding ..........................................................................1-2 Space Requirements ...........................................................1-3 Operating Environment .........
Inhaltszusammenfassung zur Seite Nr. 19
2 Contents 13. Selecting the Output Format ..............................................2-25 Selecting the paper source ...............................................2-25 Selecting the print format .................................................2-26 14. Using Auto Masking ..........................................................2-27 Selecting Auto Masking ...................................................2-27 Operating Conditions for Auto Masking .........................2-27 15. Manual Ma
Inhaltszusammenfassung zur Seite Nr. 20
3 Contents 2. Initial Settings ........................................................................4-4 User Settings on the Control Panel ....................................4-4 User Mode ..........................................................................4-5 Entering and Leaving the User Mode ................................4-6 Settings in Each User Mode Function ...............................4-7 System Settings by the dealer ..........................................4-11 3. System C
