Inhaltszusammenfassung zur Seite Nr. 1
C150-E062-04EN
M3093DE AND M3093DG
IMAGE SCANNER
OPERATOR’S GUIDE
Inhaltszusammenfassung zur Seite Nr. 2
M3093DE AND M3093DG IMAGE SCANNER OPERATOR’S GUIDE C150-E062-04EN M3093DE AND M3093DG IMAGE SCANNER OPERATOR’S GUIDE C150-E062-04EN M3093DE AND M3093DG IMAGE SCANNER OPERATOR’S GUIDE C150-E062-04EN 8P 7P 7.5P
Inhaltszusammenfassung zur Seite Nr. 3
REVISION RECORD Edition Date published Revised contents 01 June, 1996 First edition 02 September, 1996 Error revised 03 November, 1996 Resolution and Zooming function added. Troubleshooting and APPENDIX revised. 04 August, 1997 Section 2.4 revised Specification No.: C150-E062-04EN This digital apparatus does not exceed the Class A limit for radio noise emissions from digital apparatus set out in the Radio interference Regulations of the Canadian Department of Communications. Le présent appareil
Inhaltszusammenfassung zur Seite Nr. 4
Conventions Special information, such as warnings, cautions are indicated as follows: WARNING A WARNING indicates that personal injury may result if you do not follow a procedure correctly. CAUTION A CAUTION indicates that damage to the scanner may result if you do not follow a procedure correctly. NOTICE A NOTICE provides "how-to" tips or suggestions to help you perform a procedure correctly. NOTEs are particularly useful for first-time users. ii
Inhaltszusammenfassung zur Seite Nr. 5
CONTENTS page CHAPTER 1 PREFACE .................................................................................................... 1-1 CHAPTER 2 COMPONENTS ........................................................................................... 2-1 2.1 Checking the Components ......................................................................................... 2-1 2.2 Part Names and Functions ........................................................................................... 2-2
Inhaltszusammenfassung zur Seite Nr. 6
5.3 Cleaning ...................................................................................................................... 5-2 5.3.1 Cleaning the document cover, document holding pad, and document bed ........ 5-2 5.3.2 Cleaning the ADF ............................................................................................... 5-3 5.4 Consumables/Periodical replacement parts................................................................. 5-4 5.4.1 Parts number and replacement cycle
Inhaltszusammenfassung zur Seite Nr. 7
FIGURES page 2.1 Received components ................................................................................................. 2-1 2.2 M3093DE/DG parts names ......................................................................................... 2-2 2.3 M3093DE/DG Indicators ............................................................................................ 2-4 3.1 SCSI-ID setting .................................................................................................
Inhaltszusammenfassung zur Seite Nr. 8
TABLES page 1.1 The differences between the M3093DE and the M3093DG....................................... 1-1 3.1 SCSI-ID setting ........................................................................................................... 3-6 6.1 Check items ................................................................................................................. 6-1 A.1 Installation specifications ...........................................................................................
Inhaltszusammenfassung zur Seite Nr. 9
CHAPTER 1 PREFACE This manual describes how to operate the M3093DE and M3093DG image scanners. This image scanner can optically read image information from both sides of the documents and output the information to the host system. The differences between the M3093DE and the M3093DG image scanners are listed in table 1.1. Table 1.1 The differences between the M3093DE and the M3093DG Model number Interface Shipping Image size Automatic models document feeder M3093DE RS232C North America A4 size
Inhaltszusammenfassung zur Seite Nr. 10
This page is intentionally left blank. 1–2
Inhaltszusammenfassung zur Seite Nr. 11
CHAPTER 2 COMPONENTS 2.1 Checking the Components 2.2 Part Names and Functions 2.3 Indicator Functions 2.4 Resolution and Zooming Functions After unpacking image scanner, confirm that all the components have been received. This section describes the components of the image scanner and their functions. 2.1 Checking the Components These high precision components must be handled with care. Confirm that all the components shown in figure 2.1 have been received. If any component is missing, please
Inhaltszusammenfassung zur Seite Nr. 12
2.2 Part Names and Functions This section shows the exterior view of image scanner. This section also provides names of each part and describes their functions. 2.2.1 Exterior view of image scanner The image scanner can read a document of A4 or letter size at maxi- mum. Document holding pad Document cover Document bed Automatic document feeder (ADF) Indicators Stacker ADF lever ADF paper chute Third party slot opening (M3093DE) Address switch Interface connectors Power switch Interface connecto
Inhaltszusammenfassung zur Seite Nr. 13
2.2.2 Functions of each part Document cover: Closed over and holds a document to be read. Document bed: A document to be read is placed on the bed also called Flatbed (FB). Document holding pad: Presses a document to the document bed. Automatic document feeder (ADF): Automatically feeds documents to the reading position. Stacker: Stacks the read documents. Power switch: Turns the power on or off. Indicators: These LEDs indicate the status of the scanner. ADF paper chute: Holds the documents to b
Inhaltszusammenfassung zur Seite Nr. 14
2.3 Indicator Functions Power Read Check Figure 2.3 M3093DE/DG Indicators 2.3.1 Indicators The meaning of each indicator is as follows: Power indicator (Green): Lights to indicate the power is on. Read (reading in progress) indicator (Green): Lights to indicate reading is in progress. Check (device check) indicator (Yellow): Lights if a device error occurs which may result in a service call. This indicator blinks if a document is jammed in the automatic document feeder. This indicator turns of
Inhaltszusammenfassung zur Seite Nr. 15
2.4 Resolution and Zooming Functions Supported Resolutions Interpolated resolutions above 400 dots per inch are dependent upon the scanner memory option. Scanner resolution is not dependent upon the IPC-2D option. The table below shows the relationship between supported resolutions and optional memory. M3093DE and M3093DG Resolution Support Resolution Binary, Simplex and Duplex Grayscale Simplex Grayscale Duplex 100 150 M3093DG: Supported 200 Additional Memory not Not Supported 240 Required M3
Inhaltszusammenfassung zur Seite Nr. 16
This page is intentionally left blank. 2–6
Inhaltszusammenfassung zur Seite Nr. 17
CHAPTER 3 INSTALLATION AND CONNECTIONS 3.1 Precautions 3.2 Removing the Carrier Fixing Bracket 3.3 Connections 3.4 Mounting the Stacker 3.5 SCSI-ID Setting This chapter explains how to install and connect the image scanner. 3.1 Precautions Do not install the image scanner in the following places and environ- ments. See the appendix A.1 “Installation Specifications” for the information such as size of installation space. Place the scanner away from electrical noise Do not install the scanner in
Inhaltszusammenfassung zur Seite Nr. 18
3.2 Removing the Carrier Fixing Bracket To keep the scanner from being damaged during shipping, the carrier unit is fixed with a bracket. After placing the carrier unit at the installation place, remove this bracket as explained below. ‹ Place the image scanner on the edge of the desk top so that the left side (where ADF is placed) of the scanner extends from the desk top. Do not set the image scanner upside down or on its side. × × › Remove the carrier fixing bracket from position . Th
Inhaltszusammenfassung zur Seite Nr. 19
3.3 Connections Connect the image scanner using the following procedure. ‹ Set the power switch to off. Power OFF Power switch › Connect the power cable. Connect the power cable to the power inlet on the back of the image scanner. Connect the other end of the power cable to a power outlet. Power outlet for North America Power inlet Power cable for Europe fi Connect the interface cables (for M3093DE). Connect the interface cables to the interface connectors and fasten the cables with catches and s
Inhaltszusammenfassung zur Seite Nr. 20
(M3093DG) Connect the interface cables to the interface connectors and fasten the cables with the catches. Connect the other ends of the cables to the host system. If the image scanner is at the terminal side, connect the terminator. Back of the image scanner Terminator Catches If the image scanner is at ⎧ ⎫ ⎪ ⎪ the terminal side, connect To the Interface cables ⎪ ⎪ the terminator to the host ⎨ ⎬ connector to which an system ⎪ ⎪ interface cable is not ⎪ ⎪ connected. ⎩ ⎭ 3–4
