Inhaltszusammenfassung zur Seite Nr. 1
Epson Perfection V100 Photo
Scanner Parts Scanner Specifications
General
{ Copy button
a ] c Start button
Scanner type Flatbed color
a Scan to PDF
| Scan to E-mail button
b d
Photoelectric device Color CCD line sensor
button
Effective pixels 27,200 × 37,440 pixels at 3200 dpi
e
Status light
Document size Documents or photos:
8.5 × 11.7 inches (216 × 297 mm)
US letter or A4 size
Film or slides:
35mm film strips (6 frames at a time);
35mm slides (4 slides at a time)
Scanning resolution 3200 dpi
Inhaltszusammenfassung zur Seite Nr. 2
Epson Perfection V100 Photo AC Adapter (A391UC) Using the Scanner Buttons Rated input voltage AC 100 to 120 V Before using the scanner buttons, make sure you have installed Rated input current 0.6 A Epson Scan and the other software that came with the scanner. Rated frequency 50to 60Hz For details on using the buttons, see the on-screen User’s Guide. Rated output voltage DC 13.5 V Button Function Rated output current 1.5 A ] Start Scans and saves the captured image. { Copy Scans and sends the
Inhaltszusammenfassung zur Seite Nr. 3
Epson Perfection V100 Photo 2. Place your document or photo on the document table, face 5. Close the scanner cover gently so that your original does not down on the glass. Make sure the upper left corner of the move. document or photo is against the corner of the scanner, next to the arrow mark. Note: Always keep the document table clean. Do not leave photos on the document table for an extended period of time as they may stick to the glass. Placing Large or Thick Documents When you scan a l
Inhaltszusammenfassung zur Seite Nr. 4
Epson Perfection V100 Photo 3. Lay the cover down flat next to the scanner. Placing Film in the Holder 1. Open the cover of the 35 mm film strip holder. Note: When scanning without the scanner cover, gently press down on your document to flatten it. 4. When you are finished scanning, replace the scanner cover. 2. Slide your film strip all the way into the film holder with the shiny base side facing down. Your images and any wording on the film strip should appear backwards on the side that
Inhaltszusammenfassung zur Seite Nr. 5
Epson Perfection V100 Photo 4. Make sure the film strip is placed as shown. 1. Place the film holder on the document table so that it is aligned as shown. Make sure the tab with the slide icon on the film holder fits into the area with the same icon on the scanner. 5. Place the film holder on the document table so that it is aligned as shown. Make sure the tab with the film icon on the film holder fits into the area with the same icon on the scanner. 2. Place up to four slides in the film
Inhaltszusammenfassung zur Seite Nr. 6
Epson Perfection V100 Photo Storing the Film Holder Scanning and Restoring Photos When you are not using the film holder, you can store it inside the scanner cover. Using the Color Restoration feature in Epson Scan, you can transform old, faded, or badly exposed photos into ones with 1. Open the scanner cover and remove the document mat. For true-to-life color. You can restore printed photos, negative film, instructions, see page 4. or slides automatically as you scan them. 2. Slide the fil
Inhaltszusammenfassung zur Seite Nr. 7
Epson Perfection V100 Photo Removing Dust From Photos, Film, or Fixing Backlit Photos Slides Using the Backlight Correction feature in Epson Scan’s Home or Professional Mode, you can remove shadows from photos Using the Dust Removal feature in Epson Scan’s Full Auto, that have too much background light. You can fix printed Home, or Professional Mode, you can virtually “clean” the dust photos, film, or slides automatically as you scan them. For marks from printed photo, film, or slides as y
Inhaltszusammenfassung zur Seite Nr. 8
Epson Perfection V100 Photo Transporting the Scanner Before transporting the scanner for a long distance or storing it for an extended period of time, the scanner’s carriage needs to be in the center position to prevent damage. 1. Make sure the carriage is in the center position of the scanner. ❏ If the scanner is plugged in and connected to your computer, the carriage will move to the center position after scanning. ❏ If the scanner is turned off and the carriage is not in the center pos
