Inhaltszusammenfassung zur Seite Nr. 1
Quick Start Guide
Quick Start Guide
Be sure to install the software programs before connecting the scanner
to the computer!
Setup and Scanning
Check the Package Contents
p.2
Install the Software
Windows
p.3
Macintosh
p.4
Unlock the Scanning Unit
p.5
Connect the Scanner
p.6
Try Scanning
p.7
Try the Additional Features
Using the Scanner Buttons
p.10
Scanning Film (for CanoScan 3200F only)
p.11
Using the USB 2.0 Interface (On Windows) p.15
1
Inhaltszusammenfassung zur Seite Nr. 2
Color Image Scanner Models FS917600: (CanoScan 3200/3200F) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for class B digital device, pursuant to Part 15 of the FCC Rules. These limits are design
Inhaltszusammenfassung zur Seite Nr. 3
Guide to the Manuals Guide to the Manuals Open the Package Quick Start Guide (this guide) This guide describes a series of processes, from opening the package to using the scanner. READ THIS GUIDE FIRST! Scanning Guide (HTML format manual) Refer to this guide when you have finished setting up the scanner according to the procedures in the Quick Start Guide. It describes how to utilize the scanner with the bundled software, and how to solve problems when they occur. You can install this manual
Inhaltszusammenfassung zur Seite Nr. 4
Check the Package Contents Check the Package Contents Scanner and Accessories Film Guide for CanoScan 3200F USB Interface Cable AC Adapter CanoScan 3200/3200F (for a film strip or a slide) Documents and Software Programs • Quick Start Guide (this guide) • Additional Documents • CanoScan Setup Utility CD-ROM • The two figures in the brackets below indicate the respective sizes of the Windows/ Macintosh versions of the software. • Approximately 270 MB (for Windows) / 138 MB (for Macintosh) of ha
Inhaltszusammenfassung zur Seite Nr. 5
Install the Software (Windows) Install the Software (Windows) • With Windows XP/2000, you should log on with an administrator user name when you install or uninstall software programs. • If you are using a computer which does not equip USB 2.0 interface by standard, refer to P.15. 1 Turn the computer on. If the "Found New Hardware Wizard" or "Add New Hardware Wizard" appears, click [Cancel]. 2 Place the CanoScan Setup Utility CD-ROM in the drive. The CanoScan Setup Utility main menu will di
Inhaltszusammenfassung zur Seite Nr. 6
Install the Software (Macintosh) Install the Software (Macintosh) 1 Turn the computer on. Make sure to log in with the first created administrator to install the software. You cannot install the software when logged in using added administrator accounts. A message similar to the following may appear when you are using the scanner with Mac OS 9: “Would you like to look for the software on the Internet?” If it does, click the [Cancel] button to close it. 2 Place the CanoScan Setup Utility CD-
Inhaltszusammenfassung zur Seite Nr. 7
Unlock the Scanning Unit Unlock the Scanning Unit • Unlock the scanning unit before connecting the scanner to the computer. If it is left locked, a malfunction or other problem may occur. 1 Peel the seals off the scanner. 2 Gently turn the scanner over. 3 Push the lock switch toward the unlock mark ( ). Lock Switch Unlock Mark 4 Return the scanner to a horizontal position. • When transporting the scanner, always lock the scanning unit by pushing the lock switch toward the lock mark ( ). • Car
Inhaltszusammenfassung zur Seite Nr. 8
Connect the Scanner Connect the Scanner • Make sure that the scanning unit is unlocked. (P.5) 1 Peel the caution seal from the scanner. 2 Connect the scanner to the computer with the supplied USB interface cable. USB Connector Wide Flat Connector USB Interface Cable Small Square Connector 3 Attach the supplied AC adapter to the scanner. AC Adapter • Only use the USB interface cable and the AC adapter provided with the scanner. Use of other cables or adapters may lead to a malfunction. • The sc
Inhaltszusammenfassung zur Seite Nr. 9
Try Scanning Try Scanning The following steps explain how to scan with ArcSoft PhotoStudio. Top 1 Place a photo or a picture on the glass by aligning its top edge with the alignment mark, and close the Bottom document cover. Alignment Mark Windows Macintosh 2 Select [Start], [Programs] or [All 2 Double-click the [Applications] folder Programs], [ArcSoft PhotoStudio 5.5] for Mac OS X or the [Applications (Mac and [PhotoStudio 5.5]. OS 9)] folder for Mac OS 9, followed by the [PhotoStudi
Inhaltszusammenfassung zur Seite Nr. 10
Try Scanning Windows Macintosh 3 Click the Acquire icon or click the 3 Click the Acquire icon or click the [File] menu and select [Acquire]. [File] menu and select [Acquire]. If an error message appears, click the [File] menu, choose [Select Source], select your If an error message appears, click the [File] scanner model name and click the [OK] button. menu, choose [Select Source], select your scanner model name and click the [Select] button. Mac OS X ScanGear CS will start. ScanGear CS
Inhaltszusammenfassung zur Seite Nr. 11
Try Scanning 7 Select the [Output Size]. You can select from the following options. • If you selected [Print] in Step6: Flexible / 4"x6" / A4 / Letter / Custom Settings • If you selected [Image display] in Step 6: Flexible / 640 x 480 / 800 x 600 / 1024 x 768 / 1600 x 1200 / 2048 x 1536 / Custom Settings [Flexible] is selected in this example. Selecting [Flexible] scans the item at the same size as the original. Selecting an option other than [Flexible] in the [Image Display] category allows
Inhaltszusammenfassung zur Seite Nr. 12
Using the Scanner Buttons Using the Scanner Buttons You can use the four convenient buttons on the front of the scanner to scan and perform related tasks easily with a single touch of the button. Place an item on the scanner before pressing a button. • To use these buttons, ScanGear CS, CanoScan Toolbox, ArcSoft PhotoStudio and Acrobat Reader should be installed from the CanoScan Setup Utility CD-ROM. COPY Button E-MAIL Button To print (copy) the scanned image with a printer: To e-mail the
Inhaltszusammenfassung zur Seite Nr. 13
Scanning Film (for CanoScan 3200F only) Scanning Film (for CanoScan 3200F only) You can scan a single frame of 35 mm film (strips or slides) with CanoScan 3200F. Positioning the Film 1 Remove the protective sheet from the document cover. Slide the protective sheet up to remove it. When you finish scanning, replace the protective sheet by aligning it with the grooves in the document cover and sliding it downward into place. • Store the protective sheet in a safe place so that it will not g
Inhaltszusammenfassung zur Seite Nr. 14
Scanning Film (for CanoScan 3200F only) 4 Clip the Film Holder back into the slots in the Film Guide for a 35 mm strip. Film Holder Slides do not require the Film Holder to be closed. Calibration Slot 5 Place the loaded Film Guide in the correct position on the document glass of the scanner. Align the Film Guide’s mark with the scanner’s mark. • The Film Guide has a calibration slot used by the scanner to calculate the color balance. The film cannot be scanned with the correct color balanc
Inhaltszusammenfassung zur Seite Nr. 15
Scanning Film (for CanoScan 3200F only) Scanning Film The following steps explain how to scan the film with ArcSoft PhotoStudio. 1 Start ArcSoft PhotoStudio. Select [Start], [Programs] or [All Programs], [ArcSoft PhotoStudio 5.5] and [PhotoStudio 5.5]. Double-click the [Applications] folder for Mac OS X or the [Applications (Mac OS 9)] folder for Mac OS 9, followed by the [PhotoStudio] folder and the [PhotoStudio] icon. 2 Start ScanGear CS. Click the Acquire icon or click the [File] menu a
Inhaltszusammenfassung zur Seite Nr. 16
Scanning Film (for CanoScan 3200F only) 5 Select the [Destination]. You can select [Print] or [Image display]. When [Print] is selected, the output resolution is set to 300 dpi. When [Image display] is selected, it is set to 150 dpi. [Print] is selected in this example. 6 Select the [Output Size]. You can select from the following options. • If you selected [Print] in Step 5: Flexible / 4"x6" / A4 / Letter / Custom Settings • If you selected [Image display] in Step 5: Flexible / 640 x 480 / 800
Inhaltszusammenfassung zur Seite Nr. 17
Using the USB 2.0 Interface (On Windows) Using the USB 2.0 Interface (On Windows) To Switch to USB 2.0 If your computer is equipped with USB 1.1, you can switch to the USB 2.0 environment for faster scanning by purchasing and installing one of the USB 2.0 expansion cards available on the market. Compatible USB Expansion Cards/Hubs Please use one the following USB expansion cards/hubs that have been verified by Canon for compatibility. Expansion Cards • Adaptec USB2connect 5100: PCI bus • Adapt
Inhaltszusammenfassung zur Seite Nr. 18
Specifications Specifications CanoScan 3200 CanoScan 3200F Scanner Type Flatbed Scanning Element CCD 6-line color Light Source Cold cathode fluorescent lamp Film Adapter Unit - Standard equipped Optical Resolution 1200 x 2400 dpi Selectable Resolution 25 - 9600 dpi (ScanGear CS) Color 16 bit input / 16 bit or 8 bit output for each color (RGB) Scanning Bit Depth *1 Grayscale 16 bit input / 16 bit or 8 bit output *2 Color 2 msec./line (600 dpi), 3.6 msec./line (1200 dpi) Scanning Speed (Photo or
Inhaltszusammenfassung zur Seite Nr. 19
System Information System Information This form should be used to record the operating environment for the purchased scanner. If any problems occur with the scanner, you will need this information when you contact our Customer Support Help Desk. Be sure to record the information and store it in a safe location. • This information is also required to request a repair under warranty. Make sure you record the information and store it in a safe location. • Guaranteed servicing for this equipment
Inhaltszusammenfassung zur Seite Nr. 20
CANON INC. CANON DANMARK A/S 30-2, Shimomaruko 3-chome, Ohta-ku Tokyo 146-8501, Japan 1. Kund Højgaards Vej1, DK-2860 Søborg, Denmark Hotline: +45 44 88 25 91 CANON U.S.A., INC. Forhandlerhenvisning: One Canon Plaza, Lake Success, New York 11042, U.S.A. http://www.canon.dk Customer Care Center: 1-757-413-2848 http://www.usa.canon.com/consumer CANON NORGE as Hallagerbakken 110, Postboks 33, Holmlia, 1210 Oslo, Norway CANON CANADA INC. Tlf: 2262 9321 Faks: 2262 0615 6390 Dixie Road, Mississau
