Inhaltszusammenfassung zur Seite Nr. 1
MODEL W1761/W1762
12" TABLE SAW WITH
RIVING KNIFE
OWNER'S MANUAL
Phone: (360) 734-3482 • Online Technical Support: tech-support@shopfox.biz
COPYRIGHT © SEPTEMBER, 2007 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
#9077BL Printed in Taiwan
Inhaltszusammenfassung zur Seite Nr. 2
Model W1761/W1762 12" Table Saw Manual Update (For Models Mfg. Before 1/10; Sold After 7/10) Phone #: (360) 734-3482 • Online Tech Support: tech-support@shopfox.biz • Web: www.shopfox.biz We made a few changes to this table saw since the manual was originally written. The saw you received has a different blade guard with a clear shield, removable anti-kickback pawls, and a new mounting block that makes blade guard and riving knife installation/removal and adjustments much easier. As part of t
Inhaltszusammenfassung zur Seite Nr. 3
Model W1761/W1762 (M-1/10, S7/10+) Blade Requirements The spreader/riving knife included with this machine is 0.09" (2.3mm) thick and is designed for 12" diameter blades only. When choosing a standard blade, make sure the blade size meets the requirements listed below. (This does not apply to dado blades.) The thickness of the blade body and teeth can be measured with calipers or any precision measuring device. Blade Size Requirements: • Body Thickness: 0.074"–0.082" (1.9mm–2.1mm) • Kerf
Inhaltszusammenfassung zur Seite Nr. 4
Model W1761/W1762 (M-1/10, S7/10+) Blade Guard This update provides all installation and adjustment infor- mation relevant to the new blade guard. The term "blade guard" refers to the assembly that consists of the clear polycarbonate shield, the spreader, and the anti-kickback pawls on each side of the spreader (see Figure 4). Guard The clear polycarbonate guard allows the operator to Figure 4. Anatomy of the new blade guard see the blade cut the workpiece during operation. This now sup
Inhaltszusammenfassung zur Seite Nr. 5
Model W1761/W1762 (M-1/10, S7/10+) In order to work properly, the spreader or riving knife cannot be bent or misaligned with the blade. If either of these gets accidentally bent, DISCONNECT SAW FROM POWER, and straighten or replace it. Using a bent or misaligned spreader will increase the risk of kickback! Refer to Page 8 to check/adjust alignment if necessary. Installing Blade Guard & Spreader 1. DISCONNECT SAW FROM POWER! 2. Remove the table insert. 3. Insert the spreader into the bracke
Inhaltszusammenfassung zur Seite Nr. 6
Model W1761/W1762 (M-1/10, S7/10+) — If the spreader/riving knife is not inside the align- ment zone and not parallel with the blade, then it needs to be adjusted (refer to Page 8). — If the spreader/riving knife is not parallel with the blade, it may be bent. Proceed to "Checking Alignment" on Page 8 to determine if the spread- er/riving knife is bent. Anti-Kickback Pawls Anti-kickback pawls allow the workpiece to travel in only Knob one direction. If the workpiece moves backwards, such as
Inhaltszusammenfassung zur Seite Nr. 7
Model W1761/W1762 (M-1/10, S7/10+) Re-installing Pawls 1. Loosen the knob on top of the spreader, then remove Groove the blade guard. 2. Slide the pin in the pawl block into the second groove from the front of the spreader, as shown in Figure 10. Pin 3. Press the button on the pawl block shown in Figure 9, then pivot the pawls down until they lock into place. Figure 10. Re-installing pawls. 4. Re-install the blade guard onto the spreader and secure with the top knob. When to Use the Blade
Inhaltszusammenfassung zur Seite Nr. 8
Model W1761/W1762 (M-1/10, S7/10+) Riving Knife The riving knife works in the same manner as the spreader on the blade guard assembly. It is a metal plate that pre- vents the newly cut workpiece from pinching the backside of the blade and causing kickback. The key difference between the spreader and the riving knife is that the riving knife mounts below the blade's high- est point of rotation, as shown in Figure 11. The height difference between the riving knife and the Figure 11. Heigh
Inhaltszusammenfassung zur Seite Nr. 9
Model W1761/W1762 (M-1/10, S7/10+) Spreader or Riving Knife Alignment Checking Alignment The blade guard spreader and riving knife must be aligned with the blade when installed. If the spreader/riving knife is not aligned with the blade, then the workpiece will before forced sideways during the cut, which will increase Top Alignment the risk of kickback. Tools Needed Qty Riving Straightedge .....................................................1 Knife Bottom Alignment To check the spreader/r
Inhaltszusammenfassung zur Seite Nr. 10
Model W1761/W1762 (M-1/10, S7/10+) Adjusting Alignment The spreader/riving knife mounts to a block that can be repositioned to correctly align the spreader/riving knife to the blade. The mounting block adjusts by turning the Mounting Block set screws in each corner of the block. Figure 15 shows the set screws associated with controlling the mounting block position. Before proceeding, verify blade-miter slot parallelism, as specified in your original manual. Possible Tools Needed Qty
Inhaltszusammenfassung zur Seite Nr. 11
Model W1761/W1762 (M-1/10, S7/10+) Optional Table Insert Zero clearance inserts reduce tearout and increase user safety. These inserts can be customized to fit a specific blade height or blade angle for the applicable cutting operation. Zero-clearance table inserts may be available for the Model W1761/W1762 through your local Woodstock International Inc. Dealer. If you do not have a dealer in your area, a zero-clearance insert can be purchased through an online dealer. Please call or e-m
Inhaltszusammenfassung zur Seite Nr. 12
Model W1761/W1762 (M-1/10, S7/10+) New Parts REF PART # DESCRIPTION REF PART # DESCRIPTION 1V2 X1761001V2 BLADE GUARD ASSY UL987 V2.05.10 51 X1761051 SHAFT SPRING 31 X1761031 LEFT PLATE 52 XPEC07M E-CLIP 7MM 32 XPLN02M LOCK NUT M5-.8 53 X1761053 LEFT TORSION SPRING 33 XPFH01M FLAT HD SCR M5-.8 X 15 54 X1761054 RIGHT PAWL 34 X1761034 LEFT COVER 55 X1761055 PAWL SHAFT 35 X1761035 ROD CENTER PIN 56 X1761056 SPREADER 36 XPS19M PHLP HD SCR M5-.8 X 6
Inhaltszusammenfassung zur Seite Nr. 13
Inhaltszusammenfassung zur Seite Nr. 14
����������������������������������������������������������������������� �������������������������������������������������������������� ���������������������������������������������������������������������� �������������������������������������������������������������������� ������������������������ ����������������������������������������������������������������������� ��������������������������������������������������������������� � �������� �����������������������������������������������������
Inhaltszusammenfassung zur Seite Nr. 15
INTRODUCTION SAFETY ELECTRICAL SET UP OPERATIONS MAINTENANCE SERVICE PARTS Contents INTRODUCTION .....................................2 OPERATIONS ...................................... 27 Woodstock Technical Support .................. 2 General ...........................................27 W1761 Specifications ............................ 3 Basic Controls ....................................27 W1762 Specifications ............................ 4 Disabling On/Off Switch .......................28
Inhaltszusammenfassung zur Seite Nr. 16
W1761/W1762 12" Table Saw with Riving Knife INTRODUCTION Woodstock Technical Support This machine has been specially designed to provide many years of trouble-free service. Close attention to detail, ruggedly built parts and a rigid quality control program assure safe and reliable operation. Woodstock International, Inc. is committed to customer satisfaction. Our intent with this manual is to include the basic information for safety, setup, operation, maintenance, and service of this product.
Inhaltszusammenfassung zur Seite Nr. 17
INTRODUCTION W1761/W1762 12" Table Saw with Riving Knife � � � � � � �� � � � � � � � � � � � � � � � � �� �� � �� � � � � �� � � �� � � � �� �� � � � � � �� � � � �� � � � � � � � �� � � � � � � � � � � � � � � � �� � � � � � � �� �� � � � �� � � � � � � �� � � � � � � � ������ ������ ���� ������ ��� ����� � ����� ��������������������������������������������������������������� ����� ���������� �������������������� ������ ��������� � ����������� ��������������������������������������������������
Inhaltszusammenfassung zur Seite Nr. 18
W1761/W1762 12" Table Saw with Riving Knife � � � � � � �� � � � � � � � � � � � � � � � � �� �� � �� � � � � �� � � �� � � � �� �� � � � � � �� � � � �� � � � � � � � �� � � � � � � � � � � � � � � � �� � � � � � � �� �� � � � �� � � � � � � �� � � � � � � � ������ ������ ���� ������ ��� ����� � ����� ������������������������������������������������������������������������������������������������������ ����� ��������� � � ����������� �������������������������������������������������������������
Inhaltszusammenfassung zur Seite Nr. 19
INTRODUCTION W1761/W1762 12" Table Saw with Riving Knife Controls and Features E C D F G B H A M I S J R Q K P L N O Figure 1. W1761/W1762 controls and features. A. ON/OFF Switch w/Emergency STOP Paddle B. Front Rail C. Miter Gauge D. Blade Guard and Splitter E. Fence Scale Indicator F. Fence G. Extension Table H. Rear Rail I. Fence Tube J. Support Leg K. Shelf End Plate L. Lower Shelf M. Arbor Wrenches N. Blade Tilt Handwheel & Lock O. Fence Lock Handle P. Blade Angle Digital Readout Q. Blade T
Inhaltszusammenfassung zur Seite Nr. 20
W1761/W1762 12" Table Saw with Riving Knife SAFETY READ MANUAL BEFORE OPERATING MACHINE. FAILURE TO FOLLOW INSTRUCTIONS BELOW WILL RESULT IN PERSONAL INJURY. Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury. This symbol is