Inhaltszusammenfassung zur Seite Nr. 1
Inhaltszusammenfassung zur Seite Nr. 2
Contents Safety....................................................................... E2 Copyright ................................................................ E3 Glossary................................................................... E4 Reference ................................................................ E5 ~ E6 STB Connections..................................................... E7 ~ E10 Remote Control Unit................................................ E11 ~ E12 Guide of Funct
Inhaltszusammenfassung zur Seite Nr. 3
Safety This STB has been manufactured to satisfy the international safety standards. Please read the following safety precautions carefully. MAINS SUPPLY : 190 - 250 V AC 50/60 Hz OVERLOADING : Do not overload a wall outlet, extension cord or adapter as this may result in fire electric shock. LIQUIDS : The STB shall not be exposed to dripping or splashing and that no objects filled with liquids, such as base, shall be placed on the apparatus. CLEANING : Disconnect the STB from the wall outlet b
Inhaltszusammenfassung zur Seite Nr. 4
Copyright Copyright TM • VIACCESS is a trademark of France Telecom. • CryptoWorks(TM) is a trademark of Philips Electronics N.V. • Irdeto is a trademark of Mindport BV. • Nagravision is a registered trademark of Kudelski S.A. • Conax is a trademark of Telenor Conax AS. • “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Warning HUMAX cannot be held responsible for any kind of problems caused by the use of unofficial software. The use of software versions other than HUM
Inhaltszusammenfassung zur Seite Nr. 5
Glossary Glossary • Antenna A device that collects and radiates electromagnetic waves. Includes a satellite dish and abroadband antenna. • Forward Error Correction(FEC) A system of error control for data transmission. • Frequency The number of cycles or events per one second, which is expressed in the unit of Hertz(Hz). • Intermediate Frequency(IF) A frequency to which a carrier frequency is shifted as an intermediate step in transmission or reception. • Low Noise Block(LNB) Downc
Inhaltszusammenfassung zur Seite Nr. 6
Reference 1. Connect DiSEqC 1.0 All our receivers are designed to be DiSEqC 1.0 compatible. This allows multiple antennas to be connected to the STB simultaneously. If you have two or more fixed antennas or LNBs, you can use a DiSEqC 1.0 switch. 1. Connect the coaxial cable from the first LNB to the LNB 1 or LNB A input connector of the DiSEqC switch. 2. Connect the coaxial cable from the second LNB to the LNB 2 or LNB B input connector of the DiSEqC switch. 3. Do the same for other LNBs. 4. Con
Inhaltszusammenfassung zur Seite Nr. 7
5. Connect a S/PDIF Fiber-Optic cable If you are watching a programme with a Dolby Digital soundtrack(see page E14) you can enjoy the higher quality sound of the Dolby Digital audio by connecting the STB to an external Dolby Digital television or amplifier. Do this by connecting the optical S/PDIF output of the STB to the optical S/PDIF input of the external Dolby Digital product (television, amplifier,.....). 6. Software Upgrade HUMAX digital set-top box is a highly sophisticated product - i
Inhaltszusammenfassung zur Seite Nr. 8
STB Connections Front Panel F1-5000 Free-To-Air CI-5100 2 Slot Common Interface VA-5200 2 Smart card • Warning To install the unauthorized CAM into CI slot can cause the wrong operation. Do not reinstall the CAM of the already embedded CAS to prevent the wrong operation. E7 F1-5000
Inhaltszusammenfassung zur Seite Nr. 9
Front Panel VACI-5300, CRCI-5500, NACI-5700 2 Slot Common Interface, 1 Smart card 8 9 TV LED(AMBER) 5 STANDBY 1 The LED lights on in TV mode. Press to switch between Operation and Standby modes. 2 RADIO LED(GREEN) 6 TV/RADIO The LED lights on in RADIO mode. Press to switch between TV and Radio modes. 3 DISPLAY 7 , Shows service number, error messages, RCU commands and time in Standby mode. Use to change services down/up. 8 SLOT 4 STANDBY LED(RED) For a two CA Module with a smart card. Indic
Inhaltszusammenfassung zur Seite Nr. 10
STB Connections There are several ways of connecting the STB to your existing Audio/TV system. We recommend using one of the following set-up for best results: TV only 1. Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB and the other end to a SCART socket on your TV. 2. Connect one end of a RF lead to the RF OUT connector on the STB and the other end to the RF IN connector on your TV. 3. Connect your TV antenna to the RF IN connector on the STB for receiving terres
Inhaltszusammenfassung zur Seite Nr. 11
TV with VCR and Motorised System(DiSEqC 1.2) 1. Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB and the other end to a SCART socket on your TV. 2. Connect one end of a 21-pin SCART cable to the VCR SCART connector on the STB and the other end to a SCART socket on your VCR. 3. Connect one end of a RF lead to the RF OUT connector on your VCR and the other end to the RF IN connector on your TV. 4. Connect one end of a RF lead to the RF IN connector on your VCR and the
Inhaltszusammenfassung zur Seite Nr. 12
Remote Control Unit E11
Inhaltszusammenfassung zur Seite Nr. 13
1 NUMERIC BUTTONS 10 TV/SAT Press to select a service, enter your Press to select the TV/SAT mode. PIN code or numeric on the menu. 11 TV/RADIO 2 INFORMATION(RED) Press to switch between TV and Press to display the programme information Radio modes. box on the screen. And this button functions same as the RED button on the menus. 12 MUTE Press to temporarily cut off the sound. 3 SOUNDTRACK(GREEN) Press to display the soundtrack list for the 13 MENU current service. And this button functions Pres
Inhaltszusammenfassung zur Seite Nr. 14
Guide of Functions Information Box(I-Plate) The details of service part and event part are automatically displayed on the I-Plate when pressing the i button( ) or changing services. I-Plate is divided into service part and event part. SERVICE-PART(Left side of the box) SERVICE PART consists of the following items: • I-Plate icon, Current time and Dolby Digital symbol • Service name, Service number, icons • Subtitle, Teletext, Scrambling service symbol (These are automatically displa
Inhaltszusammenfassung zur Seite Nr. 15
Volume Control To adjust the volume level, use the buttons or buttons. To temporarily stop the volume, press the MUTE( )button. To cancel mute, press the MUTE( )button again or press the buttons or buttons. Soundtrack When you want to change the audio language of current service, press the GREEN( )button firstly. The on-screen menu is displayed on the top to left side of the screen. To change the audio language: 1. buttons : Use to select the aud
Inhaltszusammenfassung zur Seite Nr. 16
Guide of Main Menu 1. Select Service The select service displays the required service list which can be viewed in Simple or Advanced mode. 2. TV Guide Your STB has an Electronic Programme Guide(EPG) to help you navigate through all the possible viewing options. The TV Guide supplies information such as programme listings and start and end times for all available services. In addition, detailed information about the programme listings and start and end times for all available services. In add
Inhaltszusammenfassung zur Seite Nr. 17
1. Select Service To select the desired in the service list, you should firstly display the service list using OK button. Use buttons to select a service and press OK button. Also use buttons to select a service directly in the service list. The contents of service list are as follows: Simple Service List 1. Use the buttons to select “Select Service” from the Main Menu and press the OK button. 2. Use the buttons to select “Simple” from the Main Menu and
Inhaltszusammenfassung zur Seite Nr. 18
Guide of Main Menu Service All 1. To display the Service All, press the OK button Use RED( )button to select the All service list. 2. Select the desired service by using the buttons. 3. Press the OK button to view the selected service. The service list provides you the Simple mode and Advanced mode. The right side scroll-bar of the screen displays the location of the selected service in relation to All services. Press the RED( )button to toggle between Simple mode and
Inhaltszusammenfassung zur Seite Nr. 19
Service Alphabet Order 1. Press the WHITE( )button on the remote control unit to select the Alphabet service list. 2. Use the buttons to select a service. 3. Press the WHITE( )button to toggle Alphabet and service list. Note : The scroll bar on left of the screen shows the location of the cursor in the Alphabet. The scroll bar on right side of the screen shows the location of the selected Alphabet service. • NACI-5700 models are not applicable. Service Satellite 1. P
Inhaltszusammenfassung zur Seite Nr. 20
Guide of Main Menu 2. TV Guide You can watch a programme being shown and reserve it in the TV Guide mode. To enter the TV Guide mode Press the EPG( )button on the remote control unit or select the TV Guide on the Main Menu. To select the TV/Radio Guide Press the TV/Radio( )button on the remote control unit and TV Guide will be switched to the Radio Guide. TV Guide mode includes four different modes. To select each mode, use the following buttons: • RED ( )button : Use to displ
