Inhaltszusammenfassung zur Seite Nr. 1
CR-3510
Digital Set-Top Box
for CryptoWorks Embedded
Contents
Important Safeguards ................................... 1 ~ 4
Support & Copyright .................................... 5
Reference .................................................... 6
Connecting the Set-Top Box......................... 7 ~ 10
Remote Control Unit ..................................... 11 ~ 12
Guide of Functions ....................................... 13 ~ 15
Guide of Main Menu ....................................
Inhaltszusammenfassung zur Seite Nr. 2
Important Safeguards This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference that may cause undesired operation. This television receiver provides display of television closed captioning in accordance with §15.119 of the FCC rules. CAUTION - TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
Inhaltszusammenfassung zur Seite Nr. 3
Always be careful when using your product. To reduce the risk of fire electrical shock and other injuries, keep these safety precautions in mind when installing, using and maintaining your machine. • Read all safety and operating instructions before operating your product. • Keep the safety and operating instructions for future reference. • Heed all warnings on the product receiver and in the operating instructions. • Follow all operating and use instructions. • Unplug the product from the wall
Inhaltszusammenfassung zur Seite Nr. 4
Important Safeguards • Operate your product only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your appliance dealer or local power company. • Use only a grounded or polarized outlet. For your safety, this product is equipped with a polarized alternating current line plug having one blade wider than the other. This plug will fit into the power outlet only one way. If you are unable to insert the plug full
Inhaltszusammenfassung zur Seite Nr. 5
• Do not attempt to service the product yourself. Refer all servicing to qualified service personnel. Unplug the unit from the wall outlet and refer servicing to qualified service personnel under the following conditions: - when the power-supply cord or plug is damaged - if liquid has been spilled on the unit or if objects have fallen into the unit - if the product has been exposed to rain or water - if the product does not operate normally by following the operating instructions - if the prod
Inhaltszusammenfassung zur Seite Nr. 6
Support & Copyright First and foremost, our knowledge of the set top box marketplace along with technical expertise differentiates HUMAX. Moreover, we maintain very close working relationships with our customers. We take a highly disciplined engineering approach to product design, manufacture, testing, acceptance and to technical and maintenance support. We conduct comprehensive testing of the units, provide complete documentation and support and deliver the highest quality, most consistent p
Inhaltszusammenfassung zur Seite Nr. 7
Reference 1. Connect a Satellite antenna To the digital receiver, you can connect either a single satellite antenna directly or through converter box several antennas or LNB of multi-feed equipment. You can connect a further Sat-receiver (for example analog), with the receiver of common antenna equipment that has satellite signals. 2. Loop Through If you have another analogue or digital STB and you wish to use the same LNB then you can connect it via the loop through. Connect one end of a Coaxi
Inhaltszusammenfassung zur Seite Nr. 8
Connecting the Set-Top Box Front & Real Panel , 5 OPERATING LED (GREEN) 1 Press to change services down and up. Indicates that the STB is operating. 2 SMART CARD SLOT 6 TV/RADIO Insert the SMART CARD with it’s Press to switch between TV and IC-Chip part facing the bottom side. Radio modes. ERROR LED (AMBER) STANDBY 3 7 Indicates that the STB has an error. Press to switch between Operation and Standby modes. STANDBY LED (RED) 4 Indicates that the STB is under Standby. 1 LNB IN 5 RCA AUDIO OUTPU
Inhaltszusammenfassung zur Seite Nr. 9
Connecting the Set-Top Box to Your TV (using a RF CABLE) From Cable/ Antenna Source TV Rear Panel 1. Connect a parabola antenna cable to the LNB IN jack. Connect an AIR or Cable Box Antenna out terminal to the RF IN jack. 2. Connect between the RF OUT jack on the STB and the ANT INPUT (RF INPUT) jack on the TV. Viewing the STB programs 3. Turn on your STB and TV. 4. Tune the STB to VHF Channel 3 or Channel 4. 5. Tune the TV to Channel 3 or Channel 4 (same as you tune the STB). 6. Operate the STB
Inhaltszusammenfassung zur Seite Nr. 10
Connecting the Set-Top Box Connecting the Set-Top Box to Your TV (using a RCA CABLE) From Cable/ Antenna Source TV Rear Panel 1. Connect a parabola antenna cable to the LNB IN jack. Connect an AIR or Cable Box Antenna out terminal to the RF IN jack. 2. Connect between the RF OUT jack on the STB and the ANT INPUT (RF INPUT) jack on the TV. 3. Connect a set of audio, video cables between the AUDIO, VIDEO OUT jacks on the STB and the AUDIO, VIDEO INPUT jacks on the TV. Viewing the STB programs 4.
Inhaltszusammenfassung zur Seite Nr. 11
Connecting the Set-Top Box to Your TV and VCR You can view a STB program and record it using a VCR at the same time. From Cable/ Antenna Source TV Rear Panel VCR Rear Panel 1. Connect a parabola antenna cable to the LNB IN jack. Connect an AIR or Cable Box Antenna out terminal cable to the RF IN jack. 2. Connect between the RF OUT jack on the STB and the ANT INPUT (RF INPUT) jack on the TV. 3. Connect a set of audio, video cables between the AUDIO, VIDEO OUT jacks on the STB and the AUDIO, VIDE
Inhaltszusammenfassung zur Seite Nr. 12
Remote Control Unit STANDBY NUMBER BUTTONS TV/SAT (Reserved) TV/RADIO MUTE INFORMATION (RED) SOUNDTRACK (GREEN) SUBTITLE (Reserved) MENU PAUSE (BLUE) CURSOR TIME (WHITE) OK EXIT P+/P- V+/V- HELP EPG RCL (Recall) RS-101N 11
Inhaltszusammenfassung zur Seite Nr. 13
1 10 NUMBER BUTTONS TV/SAT (Reserved) Press to select a service, enter your 11 PIN Code or Numbers on the menu. TV/RADIO Press to switch between TV and Radio modes. 2 INFORMATION (RED) 12 Press to display the program information box MUTE on the screen. This button functions same Press to temporarily cut off the sound. as the RED button on the menus. 13 MENU 3 SOUNDTRACK (GREEN) Press to display the Main Menu on the screen Press to display the soundtrack list for the or return to the scree
Inhaltszusammenfassung zur Seite Nr. 14
Guide of Functions Information Box (I-Plate) The details of Service Part and Event Part are automatically displayed on the I-Plate when pressing the( )button or changing services. I-Plate is divided into Service Part and Event Part. SERVICE-PART (Left side of the box) Service Part consists of the following item : • I-Plate icon, Current Time • Service Name, Service Number, icon • Subtitle, Teletext, Scrambling Service Symbol (These are automatically displayed when the broadcasting
Inhaltszusammenfassung zur Seite Nr. 15
Changing Services To change services, do in the following sequence: 1. Press the Number buttons(0~9) on the remote control. 2. Press the buttons or buttons. Or press the Recall( ), Service-List( ), EPG( )button. To switch between TV and Radio services, press the TV/Radio ( )button. To select the previous viewed service, press the Recall( )button. Soundtrack When you want to watch the Audio Language of soundtrack under servicing, press the Soundtrack( )b
Inhaltszusammenfassung zur Seite Nr. 16
Guide of Functions Service List To select the desired service in the service list, you should firstly display the service list using button. Use buttons to select a service and press button. Also use buttons to select a service directly in the service list. The Service List consists of Service All and Service Favorite. On the Service List, you can change the attributes of a service through the Service Configuration. button : Use to move to the previous or next
Inhaltszusammenfassung zur Seite Nr. 17
Guide of Main Menu 1. TV Guide Your STB has an Electronic Program Guide(EPG) to help you navigate through all the possible viewing options. The TV Guide supplies information such as program listings and start and end times for all available services. In addition, detailed information about the program listings and start and end times for all available services. In addition, detailed information about the program is often available in the EPG(the availability and amount of these program detai
Inhaltszusammenfassung zur Seite Nr. 18
Guide of Main Menu 1. TV Guide You can watch a program being shown and reserve it in the TV Guide mode. To enter the TV Guide mode Press the EPG( )button on the remote control unit or select the TV Guide on the Main Menu. To select the TV/Radio Guide Press the button on the remote control unit and TV Guide will be switched to the Radio Guide. TV Guide mode includes four different modes. To select each mode, use the following buttons: • Red ( )button : Use to displa
Inhaltszusammenfassung zur Seite Nr. 19
Weekly mode Shows the information of programs that will be played for a week. Select a day you want using the buttons. To watch and reserve a program you want, do the same steps with the NOW/NEXT mode. Reserved mode Shows the program lists that you have already reserved on the TV Guide or Information Box. Maximum twenty programs can be reserved. This program list includes service name, date, duration time, reservation mode and event name. To cancel the Reserved service, select a program
Inhaltszusammenfassung zur Seite Nr. 20
Guide of Main Menu 2. Parental Control You can set a parental guidance rating to each program in this mode. 1. When the button is pressed after selecting the highlighted parental control on the initial menu screen, a display window for entering the PIN Code will appear on the center of screen. ** The default PIN Code is 0 0 0 0 . 2. Enter the PIN Code on the display window. (If any problem occurs when entering a PIN Code, you cannot switch to the next mode.) 3. Set the parental guidance r
