Inhaltszusammenfassung zur Seite Nr. 1
Sanyo Fisher Co.
21605 Plummer St.
Chatsworth, CA 91311
www.sanyo.com
SIRIUS Satellite Radio
1221 Avenue of the Americas
New York, NY 10020
(888) 539-7474
CRSR-10 User Guide
www.sirius.com
© 2004 SIRIUS Satellite Radio Inc.
CRSR-10 (7-24-04)
Inhaltszusammenfassung zur Seite Nr. 2
CONGRATULATIONS! Box Contents ® Unpack your Sanyo CRSR-10 and accessories carefully and make sure that everything listed here is Your new Sanyo™ CRSR-10 portable Plug-n-Play receiver lets you enjoy SIRIUS Satellite Radio’s present: digital entertainment in your car, home, office, or boat. You may also purchase the Sanyo BMBX-10 Portable Boombox for an enhanced listening experience. Use this manual to familiarize yourself with all 1 x CRSR-10 and 3 x Faceplates 1 x Car Mount 1 x Car Antenna
Inhaltszusammenfassung zur Seite Nr. 3
Safety Precautions Note • Do not install the unit where it will be exposed to Warning This equipment has been tested and found to high levels of humidity, moisture, or dust. Warning Take the following precautions to prevent fire and comply with Part 15 of the FCC Rules. These rules • When replacing a fuse, use only a new one with Take the following precautions to prevent traffic avoid personal injury: the proper rating. Using a fuse with the wrong are designed to provide reasonable
Inhaltszusammenfassung zur Seite Nr. 4
Cleaning the Unit • Do not install the CRSR-10 where it may hinder the • With the knobs loose, move the yoke into a 3. Attach the Adaptor to the CRSR-10 as shown left If the unit becomes dirty, turn its power off and function of safety devices such as an airbag. position that will allow you to see the CRSR- below. wipe it clean with a soft dry cloth. Do not use hard Doing so may prevent the airbag from functioning 10 screen and access the buttons. 4. Plug the cigarette lighter adapter into t
Inhaltszusammenfassung zur Seite Nr. 5
Running the Car Antenna Cable 8. Temporarily plug the cigarette lighter adapter 6. Plug the cigarette lighter adapter into 2. Plug the audio cable’s mini connector into the back of the Before routing the antenna cable, confirm that the into the cigarette lighter. the cigarette lighter. SANYO adaptor. Plug the audio cable’s white (L ch,) and red (R ch.) antenna is mounted in a good location. 9. Hook the CRSR-10 onto the mounting slot of RECOMMENDS UNPLUGGING connectors into the aux-in jacks
Inhaltszusammenfassung zur Seite Nr. 6
Sanyo Controls and Features 1 4. Category (CAT.) Up/ Down Buttons: Navigates 8. Memory (MEMO) Button (S-SEEK Function): This through the Category List Screen which displays feature will allow you to capture and store the 1. Power Button : Pressing and releasing SIRIUS Channel Categories. The current current PDT information (Artist & Song title), with a turns the CRSR-10 On and Off. Category is highlighted. Pressing again storage capacity of up to 10 listings. Once stored, 5 6 increments or
Inhaltszusammenfassung zur Seite Nr. 7
Activating your SIRIUS Subscription Basic Operation You will not be able to tune to any other channels Before you can listen to the CRSR-10, you must After you have successfully activated your SIRIUS subscription, the Default Screen will appear (Below): Use until you activate your SIRIUS subscription. subscribe to SIRIUS Satellite Radio’s service. the CHANNEL Button to select channels. 1. Make sure that the CRSR-10 is properly • The selected channel will automatically start playing. The A
Inhaltszusammenfassung zur Seite Nr. 8
Search Modes (Category, Channel, Artist, Direct Tuning Song) 3. Press and release the SELECT Button to select the Channels can also be directly accessed by The CRSR-10 has four ways to search for and select channel. To exit this mode without changing to a pressing and releasing the SELECT Button while music: by category, by channel, by artist, and by song new channel, press and hold the DISP button for 2- in the Default Screen and using the 0-9 number title. seconds. keys to numerically enter t
Inhaltszusammenfassung zur Seite Nr. 9
Preset Tuning List Mode Setting Channel Presets Searching for a Channel Preset (P.TUNE Mode) You can store up to 20 of your favorite channels as It is possible to quickly search through all of The P.TUNE Mode can also be viewed as a list presets, for quick access. Presets are stored in 2 your presets using the CHANNEL Button. showing Channel Name, Artist Name, or Song Title Preset Tuning banks, A and B, each containing 10 channel presets. 1. Press and hold the BAND button to enter the just lik
Inhaltszusammenfassung zur Seite Nr. 10
Memory (MEMO) and Song Seek (S-SEEK) Viewing Song Titles Stored into Memory display for 1-second, followed by a pop-up screen 1. Press and hold the MEMO button for 2 seconds to Functions presenting the Replace-Cancel (below, top right) enter S-Seek Mode. The song titles stored This feature allows you to capture and store the options. This prompt allows you to make the memory information (one at a time) will be current Artist & Song title with a total of 10 listings following Replace/Cancel choi
Inhaltszusammenfassung zur Seite Nr. 11
Activating the Song (S-Seek) Alert Menu Display Options Sirius ID 1. Press and hold the MEMO button for 2 seconds to To enter the Menu Options page, press and release Displays your 12-digit Sirius ID (SID) number. The An audible beep tone will be heard indicating that enter the S-Seek Mode. a match has been found. The display then reverts the MENU Button. The “Menu Options” list will SID is unique to every CRSR-10 and is required to 2. Press and Release the SELECT Button. A pop-up to the S-See
Inhaltszusammenfassung zur Seite Nr. 12
Display Settings FM Transmitter Options b. Brightness Control: Use to adjust the 3. Use the CHANNEL Button to highlight On or Off. To adjust the Brightness and Contrast of the CRSR- If you would like to use the built-in FM Transmitter, overall brightness of the LCD display. Use Use the SELECT Button to select On or Off. 10’s LCD display, either press the DISP Button on you must first make sure the feature is turned On the CHANNEL Button to adjust the Press the MENU Button to go back to the ma
Inhaltszusammenfassung zur Seite Nr. 13
Audio Jack Connection Options Channel Add/Skip Lock Options Use the CHANNEL Buttons to scroll through the If you would like to use the supplied Audio Jacks You can add or skip new or unwanted channels The CRSR-10 has the ability to lock the use of any list of available frequencies. Use the CAT. (shown below) instead of the built-in wireless FM while tuning. To activate the Channel Add/Skip channel, or channels you do not want others to Buttons to scroll 5 lines at a time for faster Transmitter,
Inhaltszusammenfassung zur Seite Nr. 14
Antenna Aiming 4. Adjust the antenna for maximum performance by When using the home antenna (included) or the positioning the antenna where the above signals optional BMBX-10 Boombox docking station are the strongest. To exit this function, press the indoors, it is important to position the antenna in SELECT Button or the MENU button. an acceptable location (See the BMBX-10 Audio Level Changing the Lock/Unlock Code installation guides for more information on the Antenna Aiming The audio output
Inhaltszusammenfassung zur Seite Nr. 15
Memory Options Time Features • Time Zone: Since the Clock adjusts the time automatically, it is important to specify In this mode, the user can turn the Memory Search This Menu Option allows for adjustments of the following items: your proper time zone. Use the CHANNEL Function (S-SEEK) On or Off. In addition, all 20 Button to select the proper time zone. The Clock Auto Shutdown Preset Memory Locations can be cleared. To change following is a list of time zones included: Alarm Clock Sleep Mode
Inhaltszusammenfassung zur Seite Nr. 16
To activate the Auto Shutdown feature, use Use the CHANNEL Button to select the the display followed by the alarm options: When the desired time is displayed, press the CHANNEL Button to select it from the desired Sleep Time. When the desired time • Set Alarm: Use the CHANNEL Button to select the SELECT Button. If Day is selected, the Auto Shutdown Menu, press the Knob to is highlighted, press the SELECT Button. “Set Alarm” From the Alarm Clock Menu. Select screen displays a list consis
Inhaltszusammenfassung zur Seite Nr. 17
Factory Default Changing the Removable Faceplates Note: If “Yes” is chosen, the unit reverts to the This Menu option is designed to restore all the 1. To remove the faceplate, hold both sides of the original factory settings for the following original factory settings. To activate the Factory CRSR-10 with one hand. Locate the indented tab parameters: Default perform the following procedure while on the bottom of the CRSR-10. Pull on the in the “Menu Options” List mode: indente
Inhaltszusammenfassung zur Seite Nr. 18
Specifications Troubleshooting Audio Output ............................................................................................. 776 mV RMS or 1 v peak to peak) PROBABLE CAUSE REMEDY FAULT Total Harmonic Distortion (THD)..........................................................................................................<0.5% Signal-to-noise (S/N) ........................................................................................................Greater than 83dB Blown Fuse, pow
Inhaltszusammenfassung zur Seite Nr. 19
Optional Accessories Important Information: Add one or all of these accessories to maximize your Sanyo experience. SIRIUS ID (SID): __ __ __ __ __ __ __ __ __ __ __ __ (Located on back of unit) BMBX-10 Portable Boombox FM Switching Box SIRIUS Customer Service: 1-888-539-7474 The BMBX-10 Boombox is a portable docking The FM Switching Box is an optional accessory if station and audio system for the Sanyo CRSR- you choose to hard-wire your CRSR-10 to your 10. The built-in amplifier and
Inhaltszusammenfassung zur Seite Nr. 20
EXCLUSIONS SANYO MOBILE AUDIO This warranty does not cover (A) the adjustment of customer-operated controls as explained in the appropriate model’s instruction manual, or (B) the repair of any product whose serial number has been altered, defaced or removed. This warranty shall not apply to the cabinet MODEL CRSR-10 LIMITED WARRANTY or cosmetic parts, knobs, batteries or routine maintenance. This warranty does not apply to uncrating, setup, installation, removal of the OBLIGATIONS product for re
