Inhaltszusammenfassung zur Seite Nr. 1
- 1 -
Inhaltszusammenfassung zur Seite Nr. 2
Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarant
Inhaltszusammenfassung zur Seite Nr. 3
firmware setting is not accessible by the end user. European Union Notice: Radio products with the CE marking comply with the R&TTE Directive (1999/5/EC), the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms: EN 60950 Product Safety EN 300 328 Technical requirement for radio equipment EN 301 489-1/-17 General EMC requir
Inhaltszusammenfassung zur Seite Nr. 4
Table of Contents Table of Contents ...................................................................................................................................... 4 1. Getting Started with the TEW-647GA ................................................................................................ 6 1.1. Package Contents ............................................................................................................ 6 1.2. Minimum System Requirements ..........
Inhaltszusammenfassung zur Seite Nr. 5
C ........................................................................................................................................................... 42 D ........................................................................................................................................................... 42 E ............................................................................................................................................................ 43 F ....
Inhaltszusammenfassung zur Seite Nr. 6
1. Getting Started with the TEW-647GA Congratulations on purchasing the TEW-647GA! This manual provides information for setting up and configuring the TEW-647GA. This manual is intended for both home users and professionals. 1.1. Package Contents TEW-647GA Wireless N Gaming Adapter CD-ROM (User’s Guide) Multi-Language Quick Installation Guide CAT-5 Ethernet Cable Power Adapter (12V, 0.5A) Using a power supply with a different voltage than the one included with your pr
Inhaltszusammenfassung zur Seite Nr. 7
2. Introduction The TEW-647GA Wireless N Gaming Adapter is an high-performance, supports high-speed wireless networking at home, at work or in public places. This bridge is also back compatible with 802.11g or 11b devices. This means that you do not need to change your entire network to maintain connectivity. You may sacrifice some of 11n’s speed when you mix 11n and 11b/g devices, but you will not lose the ability to communicate when you incorporate the 11n standard into your 11b/g
Inhaltszusammenfassung zur Seite Nr. 8
3. Hardware Overview 3.1. LED Indications 8
Inhaltszusammenfassung zur Seite Nr. 9
3.2. Rear Panel 3.3 Top View 3.4 Bottom View 9
Inhaltszusammenfassung zur Seite Nr. 10
3.3 Installation Considerations The TEW-647GA Gaming Adapter allows you to access your network by using a wireless connection from virtually anywhere within its operating range. Keep in mind that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireles
Inhaltszusammenfassung zur Seite Nr. 11
3.4 Getting Start 1. Insert Setup Wizard CD into your CD-ROM drive. 2. The Welcome screen appears on your monitor. Click Setup Wizard button. 3. Read the License Agreement, accept the terms and click Next to continue the installation. 11
Inhaltszusammenfassung zur Seite Nr. 12
4. Connect an Ethernet cable from the LAN port on your PC to the LAN port on the TEW-647GA, click Next to continue. 5. Plug in the power adapter and verify the Power & Ethernet LEDs are light. 12
Inhaltszusammenfassung zur Seite Nr. 13
6. The search window will detect the connected TEW-647GA on our pc and display information here. Click Configure to continue (default TEW-647GA IP Address is 192.168.10.110). 7. Enter the password for TEW-647GA the click Login. The default password is “blank”. 13
Inhaltszusammenfassung zur Seite Nr. 14
8. To change new password, please enter the new password below then click Change. Note: To continue without changing the password, please click on the Skip button 9. There are 2 options to configure this adapter, WPS (Wi-Fi Protected Setup) or Manual Setup. To setup with WPS method, continue to step 10 or to perform a Manual setup, please go to step 14. 10. You can choose to use Push Button Method (PBC) or PIN Method to connect to your existing wireless network using WPS ty
Inhaltszusammenfassung zur Seite Nr. 15
When selecting PBC method, once the Enable WPS is clicked, also press the WPS on your wireless router, the devices would negotiate and connection automatically. When using the PIN Method, please enter the Device PIN number on your router and save it. Use Site Survey button to find the router you would like to connect then click Enable WPS, then devices would negotiate and connect. Note: when the WPS has solid led on TEW-647GA, it means the connection has established, o
Inhaltszusammenfassung zur Seite Nr. 16
11. When the connection is made, it is recommended that you save or print your wireless settings with the Save or Print buttons. Click Apply to continue. 12. Disconnect the Ethernet cable from your PC to the destination game console. 13. Congratulations you have configured you TEW-647GA. 16
Inhaltszusammenfassung zur Seite Nr. 17
14. When using Manual Setup, you can select to receive an IP address dynamically from the router or to use an fix IP address that matches your network segment on TEW-647GA. Once you made the selection, click Next to continue. To use static IP, please make sure it matches your wireless network. Click Configure to continue. 17
Inhaltszusammenfassung zur Seite Nr. 18
15. Enter a SSID for TEW-647GA, click Next button. Note: Enter the SSID of the wireless router/access point you would like to connect to. Select the wireless mode and the security mode that your current wireless network is using. 18
Inhaltszusammenfassung zur Seite Nr. 19
WEP Encryption 16. To use WEP security, select WEP and click Next button. Select 64-bit or 128-bit WEP key length, and enter your WEP key. For 64-bit encryption, enter 10 hexadecimal characters, For 128-bit encryption, enter 26 hexadecimal characters. Click Next to continue the setting. WPA-PSK/WPA2-PSK 17. To use WPA or WPA2 security, select WPA or WPA2 and click Next button. Select WPA Mode: WPA Only, WPA2 Only, WPA or WPA2, and set Pre-Shared Key by entering 8 ~ 10 chara
Inhaltszusammenfassung zur Seite Nr. 20
18. Confirm your new settings. It is recommended that you save or print your wireless settings with the Save or Print buttons. Once finished, click Apply to continue. 19. Disconnect the Ethernet cable from your PC to the destination game console. 20
